- GC Springs on a GD???
- New sway bar question
- Brake Pad Hardware
- Where to find STi control arm bushings for wagon?
- Need Info about Rotors
- Differences between JDM STi and SPT suspension
- Suspension Settings?
- need factory part number/specs
- high speed braking vibration
- 03 WRX Axxis ultimate pad PN?
- Clicking sounds when coasting
- Variable Lift Suspension
- What struts?
- Question on sti lateral links
- Why for my brake peddle be squishy?
- Question about Spec C suspension
- WRX alignment specs with coilovers?
- Upgrade question
- Strut Brace
- Effect of camber on toe
- Need Help Fast!!!
- OK here's the deal ( important info inside )
- should i get new strut mounts?
- What do I need to assemble the STI suspension?
- 18mm or 20mm rear sway for snow?
- rs to nissan z calipers discussion
- New Rotors and Performance Pads
- Changed to tein SS kit and ripped the boot.
- WRX Brake Conversion
- Stock 2002/2003 WRX Camber
- HELP!! Promising Legacy owner - Clunk noise?
- clicking noise
- Will a 2002 TS swaybar fit an older style Impreza?
- Speed Bleeders: Passed the Test of Time?
- Speed Bleeders: Holding up?
- AEM rotor kits
- need a diagnosis
- drum brakes are the devil
- Any advice for fitting new JIC FLT-A2 coilovers on '98 RS?
- mm rating on sway bars...
- Is braking ratio front/rear adjustable?
- Tips/tricks for STi Group N trailing link bushings
- Version 8 STi Spec C springs?
- Reading Eibach Spring Part Numbers
- Steering play & alignment
- STi Alignment
- wilwood 6/4 big brakes & Rotas
- simplest caliper upgrade for '93 L
- What Camber Plates Should I Get?
- Rs to wrx rotor conversion
- Whiteline Springs questions
- Whats wrong with my car!?
- Do sedan strut bodies work on a wagon?
- KYB AGX vs. koni inserts
- DMS 40s...How Low Will They Go?
- Name this bushing part number!
- rear strut bars?
- 02 WRX rotor wear/grooves question
- help - Noise from the rear
- Rear +camber adjustment and camber plates. Assistance needed.
- Adjustable rear control arms and toe correction.
- Help w/strut or spring noise
- Top-hat bolt broken
- Need new rear pads
- How Important are Dust Shields
- Recently Destroyed a tire need help with replacement.
- RS -> WRX Brake swap beware!
- Springs availability for U.S. STi?
- Quick question about brake fluid
- Alignment for my new Prodrive springs?
- Does anyone know about airjacks
- Affordable STREET suspension?
- re aem upgrade
- 02+ Eibach Pro Kit for the 04
- TWRRacing,
- Clunking sounds on long lefts with STI struts on GC6 (attention GTGUY)
- Perrin Sway Bars for 04
- New rotors with used pads?
- brakes clunking?
- Hairpin Racing swaybar brackets
- Tein Wagon Coilover questions ...
- bought Axxis Ultimates pads, considering rotors... suggestions?
- painting coilovers?
- 5 Zigen Springs advice!!!
- Who Makes The Best Sway Bar For Wrx?
- Steering Wheel Rests to the Right With Modded Suspension
- Can someone measure the distance between strut bolts for me?
- Coilover camber plate removal?
- Need basic WRX suspension help
- GC8 energy suspension.
- Anybody have/had Skunk2 springs???
- Sway bar ends not parallel?
- another Praxis thread
- Opinions on Cusco Zero2 coilovers
- alk numbers... alignment (toe) and torque
- I need pads for Wilwood/Perrin 4 pots
- A Question for those of you with JIC FLT-A2 or similar coilovers
- help with perrin endlinks
- Brake rotors that don't rust
- Hawk HP Plus Noise
- Opinions on spring rates for Zero-2R's
- Piston diameters wanted for stock WRX 2-pot and Subaru 4-pot
- Perrin front swaybar install
- GC8 vs. GDA rear sway mount kit?
- Isnt' AEM BBK essentially a nicer H6 upgrade?
- Brake upgrades
- Ground Control
- How many of you with aluminum control arms on your WRX
- Just got new pads... wait for SS Lines before install?
- I need some brake pads for my STi.....
- Brembo Brakes
- rear sway and front strut for GC8
- STi Brembos use a different MC?
- whiteline steering rack bushings kick butt
- $500. brake upgrade (rotors, pads, lines, fluid??)
- 2004 suspension- anyone know anything?
- Do I need the hardware when getting new pads?
- B&G coilovers
- Will KYB AGX bought for an RS fit a bd legacy?
- spring stiffness
- Torque Settings Sway Bars, Tower Braces
- Brake feel Vibrate on Highway speed
- agx and cusco camber plates on wrx
- Coil-over Protection?
- Suspension KITs for the WRX?
- The rear clunk is not the tops. New ideas?
- Toe settings with negative camber
- Prokit or STi black w/AGX?
- Best procedure for fixing glazed rear rotors?
- Torque settings for struts?
- Right rear creaking
- Grease fittings for sway bars
- rear sway bar upgrade
- 03 WRX Suspension Upgrade?
- Eibach springs for $210?
- shaking
- Tein Flex vs. Type HG
- speed bleeder broke off
- Bump steer?
- Suspension and wheel/tire package questions
- How to remove old bushes
- WRX brake conversion
- need some help on my brakes...Will this work
- How tough is it to do front wheel bearings?
- JIC FLTA-2 owners: anyone having trouble reaching their damper knobs?
- STi Brakes...how much and will they fit on an 01 RS?
- Where to purchase Ground Controls?
- To those with GC8's on AGX's
- RST-2111 STi RA Factory Spring (Re: rallispec)
- brakes and new stuts
- wheel/brake fitment
- Serious Camber Problem
- bent strut?!
- Do Luck Brace Bar Legal for STX??
- Shim
- Lots of swaybar questions
- 04 sedan + prodrive sport springs info
- KYB-AGX info you might have wondered about
- EVO & STi comparison (suspension)
- SS Brake Lines
- Stock WRX (base model) brake discs
- Koni Inserts? Best place online to order?
- Tein FLEX pillowball upper mount
- My belly actually helped my alignment. Is it OK to shim struts?
- Eibach Wagon Springs
- rear sway
- Whiteline strut tops / camber plates?
- Front sway bar for WRX Wagon?
- Quick Alignment question!
- what can cause this problem?
- Jerking while releasing gas pedal
- Labor?
- Brake Failure?
- Brake and suspension recommendations
- There go the rears!!
- Just got my Tein Flex Coil-overs in.
- STi Sway Bar
- STi Strut tops with Eibach Springs?
- Perrin vs Kartboy endlinks
- Group-N tops part # summary?
- Prodrive = Eibach springs?
- STi Front control arms, ALK, and Cusco V2 brace...
- Swaybar Help Needed!
- Perrin rear brake kit squeeling no more!
- Coilovers: do I need dampening adjustment?
- Is this the factory alignment spec?
- sway bar torque spec?
- "Shadetree Alignments"?
- Got rid of another clunk noise from car.
- do p1's on a gc8 need camber bolts?
- Prodrive BBK worth running?
- cusco rear sway bar
- re-centering steering wheel even after alignment??
- SPT sedan suspension kit questions
- 235-40-17 on rotas with stock struts and tanabe springs
- Clunking Noise coming from brakes??
- Do aftermarket rotors rust less than factory ones?
- High pitched squeal and excessive heat from right rear - wheel bearing?
- "clank" sound coming from my brakes?
- what's the worst that happens if you replace pads without machining the rotors?
- WRX: Natural Understeer?
- JIC FLT-A2 vs. Tein Flex coilovers
- Coilovers for Autocross
- good springs for a big drop?
- Where to start?
- Ohlins vs HKS vs Cusco Coilover for WRX GDA
- Problems with my Stoptech BBK
- Strange noise from rear right corner.
- changing rear brake pads... need help
- Replaced pads, car shakes when braking
- ground control=bouncy??
- Weird sound from Koni inserts
- KYB AGX Struts vs. Coilovers on a daily driver??
- Front sway Bar question
- Prodrive Springs
- Koni / Prodrive or STi Spec C
- Screech noise?
- Ver. 5 Spring Part Numbers.
- Cusco Pillowball w/ Camber Adjust on GC8 TEIN Type HAs?
- Underdumped? Overdumped?
- hot brakes
- Camber help needed
- Possible to drill stock rotors?
- Molykote $$??
- Advice for OEM replacement brake pads?
- Price on KYB for WRX
- why does no one have intrax springs??
- New WRX
- Anyone have an update on KYB AGX on WRX wagon?
- Perrin Springs
- Cut bumpstops w/Prodrive springs?
- Koni inserts - which strut body?
- rotors = shaking?
- Will painting your rotors cause them to overheat?
- Koni Inserts Swoosh Noise
- Need Help Deciding: JIC - Tein - Cusco
- Anybody know of good brake pads for an 03 WRX?
- Front Endlink
- Problem: Brake pedal soft at first, then firm (master cylinder dying?)
- alignment in north jersey?
- Tein: adjustable spring rate?
- WRX AGX Adjustment ?
- Diagnose bump/play
- Tree + blinding rain + WRX = bent strut
- Question about the rear caliper?
- PST has their AGX'es in now
- Best Alignment Machine?
- Need new rear struts with with adjustable camber
- What would make the biggest difference?
- perrin endlinks. anyone have pictures of the install?