Well I tought I was done the wiring but As soon as i turned the key to ign, blew fuse #11 .I disconected the ecu connectors 1 by 1 to see where was the problem and when the connector b (22 pins ) is not plugged in the ECU, i dont blow the fuse.So I started to disconnect the wires 1 by one to see where my problem was and Found out that when every thing is plugged in, minus the green and red wire going to the fuel pump relay, i dont blow the fuse but as soon as i connec it, it blows instantly.So I said to myself that i had to be a short in this circuit (from the ecu to the fuel pump relay and the fuse box, fuse #11 ) but i rewired it with brand new wire and still blows this fuse.Any ideas?I'm so close to get this car on the road yet so far away!It's getting frustrating!

i dont have your answer, but i just wanna make sure your not overlooking something.. are you using an FPC? if not, only pin 1 should got to the relay, and pin3 to ground IIRC.

.sith.