Sorry wasnt sure where to post this.

I am just about to hook up all my boost/vacuum lines to my intake manifold.
Now whats the best way to do this?
I have 3 on my intake manifold.

and need a line for Sard FPR / Boost Guage / External Wastegate / BOV / and Gizzmo EBC

So what are the ones that would be best to have there own line and what ones should I Tee together?


What you think of this way-

FPR is on it's own line, the BOV, gauge and external wastegate can be on the other, the MAP sensor (and subsequent MAP sensor for a EBC) can be on the third.

Let me know what ya think??

Thanks
Michael

anyone :D

i should know better than to even try to answer this, but i will try to give you some info, even if it does not answer your questions.
1) please put your year & model in your profile & in your post.
despite nasioc nominally being a club of impreza owners, a large number of 'other' Subarus are represented here.

2) do a quick search on BOV's and read Unabomber's Manifesto
here http://forums.nasioc.com/forums/showthread.php?t=533787
particularly the BOV section
here http://forums.nasioc.com/forums/showthread.php?s=&threadid=468038

BOV's are a touchy subject here, as they seem to contribute sound, but cause extreme variation in AF ratios causing generral poor performance.
that being said, they ARE used by some folks.

3) depending on your year/model, a common location for the boost/vacuum line T
is the BPV line on the front of the TMIC

sorry, that is abt the limit of useful info i have.

Sorry,
My cars a 1989 Subaru Legacy RS with a 2.5L EJ25 in it.
That helped in some of my questions but didnt awnswer all of them. thanks for your help tho.

Anyone got any anwser to this?? I'm sure some of you must have all this stuff on your car,how do you install the lines??

anyone??? :D

Ttt :d

Moving this to the Conversions forum since you have a swap.