|
|
View Full Version : FS: Huge Part out of 02 Salvaged WRX! parts galore.
Aspen_2.5RS 06-07-2006, 11:53 PM Edit: 12/29/07 Read this first post before even thinking about pm'ing me.
STOCK PARTS PARTS PARTS AND MORE PARTS!!!!!
This is a part out of an 02 psm wrx salvaged sedan. Please check below to make sure the part isn't sold below before you ask about it.
2002 Subaru WRX
Silver exterior/black interior
Mileage: 21,175
You can pm me, post here, or email me for parts. As far as costs, expect about 50% of what parts cost new for most stuff + shipping (sometimes less), unless Subaru wanted a ridiculous amount for something new, then we'll figure something out. Preference or dibs on parts will be given to locals (or if you can pick it up).
I've put together a list to give you an idea of what parts you can expect to be bad. Here is a list of what I know that is either:
Damaged or Unusable
-driver sideskirt tabs are broken
-driver side front control arm is broken/bent
-steering rack/tie rod end on driver front is bent
-driver side rear lateral link is bent
-passenger front & rear doors are scratched and lightly dented
-all plastic cam gears are unavailable
-passenger side head is chewed up due to broken valve
-piston #3 in the block is chewed up on the face
-timing belt covers are all broken
-a/c tensioner pulley is cracked
-radiator/condenser/fans are all unusable
-headlights are busted
-foglights are busted
-front bumper/hood/grill/fenders are all messed up
-washer overflow container is busted
-windshield washer fluid reservoir is dented/unusable
-oil fill on valve cover is broken
-clutch slave cylinder/bracket is broken
-glovebox handle has broken off
-front sway is bent
-both driver and passenger front airbags have been deployed
-muffler is beat up some
-passenger front seatbelt does not retract
-xmember is bent
-oil pan is dented in a few places
-2 coilpacks have cracks on the boots (battery leaked on them)
-a/c compressor took a hit and doesn't turn freely all the way around
-driver rear door has some light scratches on it, but otherwise is good
-headliner was damaged while pulling it out (oops)
-front 02 sensor
Available parts (if you don't see it in any of the lists, ask):
-door panels (cards)
-cluster bezel (cluster surround)
-camshaft sensor
-spare tire/rim
-stock crank pulley
-misc. heatshields
-cruise control unit
-95L fans (from last swapped car)
-miscellaneous trim pieces
-dash
-power mirror controls
-speakers/tweaters
-rear floormats
-trunk/gas tank release parts
-windshield wiper motor
-power lock and window motors
-cowl cover in front of windshield
-door glass (all door glass available minus passenger front, driver front glass, driver rear glass, passenger rear glass)
-oil fill cap
-coolant temp sensor (1 used)
-psm fuel door
-gas cap
-fuel rails
-2 center consoles (pick up only)
-2 rear deck covers (pick up only)
-switches
-cams
-2 sets of wrx carpet (pick up only)
-passenger side head has a broken valve and the head is chewed up), short block is good other than #3 piston which took a hit from the valves (I think a rehone and new piston would fix it up - or bore it out and put some forged pistons in), etc. etc etc. etc. If you don't see it on the sold/pending list, ask me and I might have it.
SOLD or PENDING SALE PARTS
-trim around center vents, center vents, and 2 silver vent trim rings - SOLD -DrinkaV8
-boost solenoid, bracketry, cover, twists for cover, & covers for wipers - SOLD- Pacobeagle
-transmission - SOLD - Dao
-turbo, uppipe, intercooler, bypass valve w/ hoses, injectors, fuel pump, rear sway, end links, & mounting brackets - SOLD -Drew
-inlet tube - SOLD - ein86
-shift boot - SOLD - Stegall
-one tgv (driver front) - SOLD - brianj
-hood scoop with hardware - SOLD - IronmonkeyL255
-fuel controller - SOLD- Jeff25RSti
-Big ass plastic piece directly in front of driver's knees/under steering wheel - SOLD - Biggly
-tube that goes to the stock airbox (the flat open piece that starts above the grill and then goes to the fender) -SOLD- Biggly
- rear tow eyelet - SOLD - Biggly
-Cup holder (silver) - SOLD - Biggly
-Trunk floor/carpet (basically most of the trunk interior that isn't metal) - SOLD - Biggly
-radio trim, coolant reservoir on engine, & glovebox - SOLD- strohausii
-jack, spare hold down, and pouch with tools - SOLD - ohhello
-autodimming mirror with harness - SOLD - andivic
-rear seatbelt on the driver side - SOLD - Ritky
-2 coilpacks (the other 2 are probably bad b/c the boots are cracked) - SOLD - farulz
-plastic that holds and surrounds the shift boot - SOLD - Joshua
-fog light button - SOLD - Joshua
-bulk wiring harness/front harness - SOLD - ituner
-pedal assembly (clutch/brake/accel) - SOLD - suberdave
-axle back - SOLD - Carnot
-washer fluid cap - SOLD - Travis
-wiper stalk - SOLD - lektro808
-power steering pump - SOLD - Wes
-front seats with brackets/bolts - SOLD - Dowroa
-high pressure a/c cap - SOLD - William
-driver side mirror and bolt covers for seats - SOLD - STi-JDM
-gauge cluster - SOLD - timmyp
-intake manifold (top portion) - SOLD- Shane
-power steering reservoir - SOLD - Calvin
-carpet clip for driver side - SOLD - Kax
-rear passenger tgv sensor - SOLD - dingobite
-clock/pod - SOLD - Ryan
-passenger front power window switch - SOLD - Tate
-rear calipers w/ pads - SOLD - RJ
-rear 02 sensor - SOLD - Robert
-maf, power steering lines, throttle cable - SOLD - Shu
-front calipers - SOLD - sanchez
-rear rubber fender liners - SOLD - 7ast129
-dead pedal clips and 2 blanks from the center console - SOLD - Matt
-interior door handles with trim - SOLD - Brent
-passenger side mirror with trim piece/rubber triangle - SOLD - Joseph
-trim piece in front of driver rear tire - SOLD - Shane
-a/c line from firewall to compressor - SOLD - John
-ecu - SOLD - Jamie
-passenger side front seatbelt male end tab - SOLD - Rob
-sideskirts - SOLD - Jeremy
-rear differential - SOLD - Sam
-driver front seatbelt - SOLD - Stuart
-ashtray - SOLD - Ryan
-passenger side front window, weatherstripping for front window (and rear), black trim piece between the passenger side windows, black plastic insert under the gas cap, rear driver side interior door panel, rear subframe - SOLD - Jeremy
-hvac controls - SOLD - Capt Crunch
-rear seat - SOLD - Andrew
-passenger side front control arm, passenger side rear lateral links, passenger side rear trailing arm - SOLD - Richard
-front axle assembly - SOLD - Matt
-rear wrx hub/knuckle assemblies - SOLD - Abel
-passenger front hub/knuckle assembly - SOLD - Richard
-2 pink door card clips and the clips that hold the plastic trim piece in by the driver's right foot - SOLD - Bryce
-stock airbox, hose from airbox to inlet pipe, silencer, and hardware - SOLD - Justin
-oil line that runs from the top of the turbo to the head - SOLD - Jose
-right rear window switch with trim - SOLD - David
-uppipe support brackets - SOLD - John
-Idle air control sensor - SOLD - Joshua
-driver side front floormat holder clip - SOLD - Kenneth
-crankshaft sensor - SOLD - Michael
-hose from inlet pipe to block breather and hose from pass. side valve cover to intercooler tube on pass. side - SOLD - Jose
-wiring to charcoal canister (black box at rear of car) - SOLD - Phillip
-sensor that bolts to the intake manifold, has 2 vaccum lines running to it - SOLD - Steven
-intercooler brackets w/ bolts - SOLD - Kent
-engine harness - SOLD - Troy
-BBS wheels with tires - SOLD- Zack
-master cylinder and brake booster - SOLD- Juan
-driver side a-pillar trim - SOLD- Dustin
-rear passenger door sill plate and both top sections of the c-pillar trim -SOLD- Greg
-steering wheel rim -SOLD- Bryan
-6 disc changer -SOLD- Scott
-Passenger front window, ABS unit with bracket, sun visors, dome light, and map lights -SOLD- Marcin
-passenger side window switch -SOLD- Steven
-clutch, pressure plate, & t.o. bearing -SOLD- Alex
-passenger rear door and wiper transmission assembly -SOLD- Sean
-upper steering column trim -SOLD- Anthony
-driver side front window switch trim -SOLD- Benjamin
-3rd brake light -SOLD- Ken
-wingless trunk-SOLD- Shawn
-timing belt tensioner and 2 idler wheels/bearings -SOLD- Ron
-center console lid and hardware -SOLD - Michael
-combination switch for headlights/turn signals -SOLD - Michael
-rear diff protector w/ hardware -SOLD - Richard
-stock downpipe (w/o after cat section) -SOLD - Matthew
- waterpump w/ neck and shift knob -SOLD - Scott
-cam caps for both heads w/bolts -SOLD - Jeremy
-middle sunvisor -SOLD - Alan
-driver side head w/o cams -SOLD - Ron
-tgv manifold runners -SOLD - Josh
-throttle body-SOLD -Aba
-3rd catalytic converter -SOLD- Carl
-hvac underdash boxes (heater core/blower etc.)-SOLD- Stephan
-driver side front and rear door horizontal black trim -SOLD- Luis
-driver side front door and window-SOLD- Crisco
-taillights -SOLD- Justin
-exhaust manifolds & crossover pipe -SOLD- Shyloh
-front floor mats - SOLD- Dan
-window trim (goes over windows) pass & driver and driver side vertical trim piece between the windows -SOLD- crisco
-top steering column plastic-SOLD- James
-flywheel w/bolts-SOLD-Peter
-hazard switch -SOLD- Bill
-windshield washer motor-SOLD-Andy
-rear axles -SOLD- Ivan
-alternator -SOLD- Matt
-TPS -SOLD- Johnny
-ebrake cables, rear brake shoes, all springs/spacers/adjusters (hardware) for back brakes -SOLD- David
-valve covers -SOLD- Matt
-driver rear door -SOLD- Chuck
Thanks,
Cam
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/02silversubarusalvagepics015.jpg
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/02silversubarusalvagepics012.jpg
More pics below:
ohHello 06-08-2006, 12:01 AM Do you have the piece that holds down the spare tire, i think its like a hook or somehting, and also the stock jack? PM me if you got them, thanks -mike
Aspen_2.5RS 06-08-2006, 12:06 AM Got them, sending you a pm.
Cam
More pics of parts (updated):
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts001.jpg
Some of the trim parts left over (but not all)
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts002.jpg
clutch fluid reservoir/mastercylinder SOLD etc...
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts003.jpg
cruise control unit, proportioning valve, etc..
sk84fun21 06-08-2006, 12:17 AM what about the screw that holds the jack in place?
deadred 06-08-2006, 12:22 AM was the master cylinder damaged?
Aspen_2.5RS 06-08-2006, 12:25 AM sk8fun21, I have the screw that holds the jack in place (if there is one, thought the jack held itself in). Shoot me a pm.
deadred, the master cylinder is good to go. Shoot me a pm. I assume you want the brake booster as well.
Cam
Pacobeagle 06-08-2006, 12:27 AM Yup, i'm here. Where do I send $$. Oh, how much for these items? One more thing....possibly interested in the tranny. What condition is it in? Can you shift through the gears?
Aspen_2.5RS 06-08-2006, 12:35 AM Pacobeagle1, please send me a pm with exactly what you need.
Anyway, just send me a very detailed list so I know exactly what to send and we'll come up with a price.
Trans is sold pending payment tomorrow night.
Cam
More pics:
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts017.jpg
ej205 short block
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts015.jpg
ej205 shortblock - damaged piston
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts016.jpg
only the shortblock remains
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts014.jpg
only the shortblock remains
recce02 06-08-2006, 01:10 AM Wondering how much for the passanger air bag cover. I know it is blown just looking to fill the void in mine as i have a rally computer hooked up and just a gaping hole in my dash.
Peace out
Marvin
Gravel Crew Rally Team USA
Aspen_2.5RS 06-08-2006, 01:16 AM recce02, probably like $15 shipped since you're in CA. Let me know.
Cam
More pics:
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts007.jpg
passenger rear door sold without glass
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts009.jpg
driver rear door (has 2 very light scratches that you have to look for)
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts011.jpg
valvecover and cams
DrBiggly 06-08-2006, 01:39 AM Cam,
For interior pieces I'd like:
1) Armrest extension bit
2) Left rear door panel
3) Big ass plastic piece directly in front of driver's knees/under steering wheel
4) Cup holder (is that already taken? Is it in silver I think?)
5) Trunk floor/carpet (basically most of the trunk interior that isn't metal)
6) Are the rear lateral links damaged?
Thanks man! (Send a PM with all the info) :)
-Biggly
Aspen_2.5RS 06-08-2006, 01:59 AM Pm'd you.
Cam
More pics:
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts010.jpg
rear axles/undercarriage parts
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts013.jpg
miscellaneous clips/bolts/power lock and window motors inside the doors
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxsalvageparts005.jpg
Bulk harness is SOLD, but other parts in the pic are available
Left coast STi 06-08-2006, 02:27 AM pm'd you..
nguyen925 06-08-2006, 02:27 AM lol i saw this on ebay, gl with the sale.
calmnothing 06-08-2006, 03:24 AM If the seats aren't sold I'd be interested in them.
sk84fun21 06-08-2006, 03:48 AM also how much for the box cover taht sits right behind the intake box? my wrx is missing it? also the screw that holds the pop out cupholder in? if you have the carbonfiber trim inside how bout the housing that hold the pop-out cup holder (i need the small piece next to the cupholder to cut soo i can mount a TT there)? finally one of the squares next to the fog light/cruise control switch? thanks
Junglist 06-08-2006, 07:26 AM PM sent
Aspen_2.5RS 06-08-2006, 07:34 AM Left coast sti, checking and will reply.
nguyen925, yeah, I wish someone had bought it as a whole. :lol:
calmnothing, If spoonfedb18a1 falls through, I'll let you know.
sk84fun21 - the box cover that covers the solenoid is pending to Pacobeagle right now. The screw that holds the pop out cupholder is pending to Biggly since it will go with the cupholder. This car doesn't have the carbon fiber trim. I do have an extra square that goes next to the cruise/fogs.
Junglist, checking and will reply.
Everyone please be patient with me as there are only so many things I will be able to take off and ship each day. I'm only one person, not a business. Thanks.
dang it's too early for this ish...
Cam
anthonyrb98 06-08-2006, 08:02 AM can i have the stock fuse box cover if it is still in good condition? also, the trunk board that covers the spare tire well and the carpet liner on top of it as well? pm me please! thanks! what's the condition of the passenger side rear door?
anthonyrb98 06-08-2006, 08:02 AM ^ stock fuse box cover in the engine bay
Aspen_2.5RS 06-08-2006, 08:08 AM I think that fuse box cover may have been lost in action. The carpet liner is pending sale to Biggly.
The passenger rear door doesn't have any dents in it. It does have one ding I think. It also has some scratches. See here for more detailed pics of the body: http://s16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/?sc=1&multi=3&addtype=local&media=image
Cam
anthonyrb98 06-08-2006, 09:08 AM i'll take the trunk board then...
Aspen_2.5RS 06-08-2006, 10:54 AM Actually Biggly is taking that as well I think. I'm sorry about that.
Cam
unloco187 06-08-2006, 11:51 AM pm sent
ucbsti 06-08-2006, 12:35 PM Interested in
-OEM Jack
-Plastic steering column cover (top portion)
Shipped price to 95134
Aspen_2.5RS 06-08-2006, 12:39 PM -Jack is pending sale to ohhello
-steering column top cover $20 shipped
Cam
aaronSTi 06-08-2006, 12:39 PM i need driver side and passesnger side side mirror glass..
Aspen_2.5RS 06-08-2006, 12:41 PM I can sell you the whole mirrors, but I'm not going to take the mirrors out of the housings.
Cam
DrBiggly 06-08-2006, 12:56 PM Cam,
Thanks a bunch for holding those for me. When I got my car from Tom he'd butchered up the stock stuff and there just wasn't anything left of it. Still no stock jack and hand tools; no idea where those went. Oh hey, tow hook for the front...is that in there? What about the eyelet that's bolted to the rear of the car? :)
-Biggly
PM'd about the autodimming mirror...
brpaps 06-08-2006, 01:20 PM Has anyone one asked you for the stock recirc. valve and hose yet? If not, I am interested.
Aspen_2.5RS 06-08-2006, 01:51 PM Biggly, the eyelet that's bolted to the rear of the car is there. Tow hook for the front has passed on I'm afraid.
Rex8, replied to your pm.
brpaps, the bypass valve has already been spoken for (I just updated the list).
Hoodscoop has been sold, CJ just picked it up!
Cam
Aspen_2.5RS 06-08-2006, 03:19 PM My inbox here fills up very fast, so if you want you can also email me @ cam_20_m@ yahoo.com (no space before the yahoo, just trying to avoid spam).
I can't believe how fast these classifieds move now.
Cam
Carnot 06-08-2006, 03:35 PM e-mail sent.
-Bryce
Aspen_2.5RS 06-08-2006, 06:38 PM Replied. :)
-Big ass plastic piece directly in front of driver's knees/under steering wheel - SOLD - Biggly
-Cup holder (silver) - SOLD - Biggly
-Trunk floor/carpet (basically most of the trunk interior that isn't metal) - SOLD - Biggly
Cam
yebokmj 06-08-2006, 08:42 PM Is the power steering reservoir available? If so how much? Thanks,
Joshua
Aspen_2.5RS 06-08-2006, 09:54 PM yebokmj, it is available, $30 shipped with the bracket.
Just let me know,
Cam
andivic 06-08-2006, 10:12 PM PM you about mirror
ScoobyFreak 06-08-2006, 10:39 PM Stock 6-disc changer available?
Aspen_2.5RS 06-08-2006, 10:48 PM Yep, available.
Cam
tzedek 06-08-2006, 10:56 PM floor mats? shift knob
ScoobyFreak 06-08-2006, 11:03 PM PMed RE: changer
Aspen_2.5RS 06-08-2006, 11:13 PM -boost solenoid, bracketry, cover, twists for cover, & covers for wipers - SOLD- Pacobeagle
-autodimming mirror with harness - SOLD - andivic
Floor mats and shift knob are available. Shoot me an email, please.
Scoobyfreak, replied.
Cam
If ya'll can please email me at cam_20_m@ yahoo.com (no space there before the yahoo) b/c my inbox here is about to overflow... I would really appreciate it!
ScoobyFreak 06-08-2006, 11:17 PM Sorry but I'd PMed again before your last post.
Aspen_2.5RS 06-09-2006, 12:27 AM No problem.
-transmission - SOLD - Dao
-fuel controller - SOLD- Jeff25RSti
I'll get tracking #'s out to you guys as soon as I start getting this stuff out tomorrow.
Thanks,
Cam
Aspen_2.5RS 06-09-2006, 12:12 PM Anyone need any other parts off the engine, underhood, interior etc. etc.? Let me know.
I'm starting to ship parts out today.
(I won't be able to ship anything on Monday b/c I'm going to FL for the day)
Thanks,
Cam
tzedek 06-09-2006, 01:39 PM emailed you
Aspen_2.5RS 06-09-2006, 03:35 PM tzedek, I emailed you back.
I just shipped out:
-fuel pump controller
-boost solenoid, bracketry, cover, twists for cover, & covers for wipers
-autodimming mirror with harness
Tracking #'s have been sent to those people above ^ (check your emails)
There are still tons of parts left. Let me know what you need and I will get it out as soon as possible!
Cam
eddie1982 06-09-2006, 03:56 PM I'll take he waferboard piece that goes over the spare tire
Aspen_2.5RS 06-09-2006, 03:58 PM already sold
Cam
eddie1982 06-09-2006, 03:58 PM Expansion valve for the ac
Aspen_2.5RS 06-09-2006, 04:00 PM Expansion valve for the ac
I'm going to need a pic or explanation of where this is, but I should have it.
Cam
eddie1982 06-09-2006, 04:01 PM Also TGV motor and intake manifold?
eddie1982 06-09-2006, 04:01 PM Expansion valve is going to be up under the dash.I'll see if I can find some pics
Aspen_2.5RS 06-09-2006, 04:03 PM I have a tgv sensor and the intake manifold. I have the expansion valve as well (pic would be helpful, though).
Please send a pm to figure out the details.
Cam
eddie1982 06-09-2006, 04:07 PM Pm sent my friend
Psydotek 06-09-2006, 05:28 PM I would like a seatbelt from the front, the MALE buckle portion. The part attached to the cross/lap belt. The part that you'll have to cut the seatbelt to remove. NOT the part of the buckle attached to the seat. :)
Should be easy to ship, cut seat belt, pull of the flat metal MALE buckle portion, drop in small padded envelope, and mail.
[sorry if i'm sounding overly specific, i already did this once with another NASIOC member and he sent the female portion instead... :( I'm too lazy to bother about it...]
Anyways, i need it to clip into my seatbelt buckle because i have a seatbelt harness. When i use it the car thinks i'm not buckled in so i have to plug the passenger side seatbelt into my seat, but if a passenger wants to ride with me then i have to wear two seatbelts and, well, yeah you get the idea hopefully. :) If the car thinks you're not buckled in and you get into an accident where the airbags deply, the car will deploy the airbags 3-4 times faster than usual which could lead to extra injury even when i'm wearing a harness.
Please PM me a price. :D I only need one of the metal clips.
AdamRX 06-09-2006, 05:28 PM Sorry sent you three PM's...kept forgetting stuff
Just looking for:
-Fog light button
-Exterior Window Molidng trim (black/lower) all 4???
-Plastic interior piece that the shift boot sits into. The whole piece
-Rear Windshield
LMK,
Adam
Aspen_2.5RS 06-09-2006, 05:54 PM Psydotek, I'm not sure I want to cut that, especially if someone wanted the entire seatbelt. Unless you just want to make an offer for the whole thing.
AdamRX, I replied.
Cam
Psydotek 06-09-2006, 07:23 PM Psydotek, I'm not sure I want to cut that, especially if someone wanted the entire seatbelt. Unless you just want to make an offer for the whole thing.
AdamRX, I replied.
Cam
Well buggery... If it'll help change your mind, most people consider seatbelts from a salvaged car to be essentially b0rk3d. ;)
No rush, but please let me know if nobody ends up taking them after a while. :)
Aspen_2.5RS 06-09-2006, 07:29 PM Alright, I'll let you know. I do have another seatbelt pending for $40 shipped.
Thanks,
Cam
04works 06-09-2006, 08:10 PM sent u pm about left rear door
Nikko 06-09-2006, 08:16 PM Driver's side front door available? I'll take the entire thing if it is avail.
Aspen_2.5RS 06-09-2006, 08:49 PM 04works, I'm not selling any of the other doors currently. I'm waiting to hear back from someone about buying the rear clip with the doors (other than the driver front). I had already pre-sold this door before I was asked about the rear clip.
Nikko, the driver front door is pending sale. I just had someone come look at it and he wants it. He's going to pay me for it soon. Sorry. If by chance he falls through and the rear clip guy falls through on the doors, I'll let you know.
Keep the requests coming. Thanks,
Cam
halas 06-09-2006, 09:14 PM hey looking for some interior two way switchs
klepic 06-09-2006, 09:40 PM Sent you a PM.
Aspen_2.5RS 06-09-2006, 10:07 PM hey looking for some interior two way switchs
I've got them all. Send me a pm or email for what you're looking for specifically.
Cam
Edit: I've gone camping. I'll be back Sunday to answer questions and pm's.
Aspen_2.5RS 06-11-2006, 04:03 PM All pm's have been returned (at least the ones not asking about the transmission - the trans is sold, check the list). Thanks,
Cam
brpaps 06-11-2006, 04:17 PM Are you still holding the Bypass valve for anyone?
King Ding187 06-11-2006, 04:48 PM Are the brakes all available? Would want front and rear discs calipers and backing plates as well as the rear hub assembly. Let me know if they are and give me a price shipped to 19363 if you can, thanks.
Aspen_2.5RS 06-13-2006, 06:05 PM I replied to above questions through pm.
I just shipped out and sent tracking #'s for the following:
-wrx pedal box + hardware (Dave)
-wrx driver side rear seatbelt (Rit)
-wrx fog light switch and shifter surround (Adam)
-2 wrx coil packs (Joshua)
-stock jack, spare hold down, and tool pouch (Michael)
-stock axle back (Bryce)
Don't be shy, what else do you guys/girls need?
Thanks,
Cam
Redline8k 06-13-2006, 07:46 PM Im looking for the oil return for the turbo that mounts to the head on the passinger side. its green\goldish in color and held in by 1 10mm bolt. I cant seem to get one through the dealer(they cant find even a pic of it in their system). Please let me know.
thanks
-nick
Aspen_2.5RS 06-13-2006, 09:01 PM Shoot me a pm. I have it.
Cam
DrBiggly 06-13-2006, 09:06 PM Hey Cam,
Do you have the tube that goes to the stock airbox? The flat open piece that starts above the grill and then goes to the fender (don't need the elbow/silencer/stock box.) :)
-Biggly
Aspen_2.5RS 06-13-2006, 09:21 PM Hey Cam,
Do you have the tube that goes to the stock airbox? The flat open piece that starts above the grill and then goes to the fender (don't need the elbow/silencer/stock box.) :)
-Biggly
I do. If you want it, let me know. I'll take $10 for it.
Cam
DrBiggly 06-13-2006, 10:00 PM I do. If you want it, let me know. I'll take $10 for it.
Cam
Sold! I'll send you along a PayPal...eh, shortly anyway. I'm waiting on someone to PayPal me some funds and if that doesn't come through I'll send that and a bit more your way in by Thurs. :)
-Biggly
Aspen_2.5RS 06-13-2006, 10:04 PM Sounds good Mike. Please include that 3% paypal charge for me. :)
Cam
Redline8k 06-13-2006, 10:11 PM PM sent!
flipincanadian 06-13-2006, 10:34 PM Do you still have the momo shift knob, if so how much shiped.
THanks
Josh
Aspen_2.5RS 06-13-2006, 10:38 PM Uh, it's not a momo shift knob to my knowledge. It's just a regular leather knob.
Cam
WRX_Nick 06-13-2006, 10:41 PM fuel rails...?
Aspen_2.5RS 06-13-2006, 11:09 PM Gottem, send me a pm (include your actual location so i can figure out shipping).
Thanks,
Cam
eddie1982 06-13-2006, 11:31 PM Let me know abou that expansion valve? I still want it
Aspen_2.5RS 06-13-2006, 11:33 PM Let me know abou that expansion valve? I still want it
I still need to know how big of a part it is and what they sell for new so I can get an idea on a shipped price.
Cam
lektro808 06-13-2006, 11:37 PM PM sent.
DrBiggly 06-14-2006, 12:43 AM Sounds good Mike. Please include that 3% paypal charge for me. :)
Cam
Of course. You'll also get the 3% from the last stuff that I forgot and didn't remember until something like 2 hours after I sent the last one. :o
-Biggly
socalwrxf4#15 06-14-2006, 02:30 AM http://img.photobucket.com/albums/v244/volcomsoldier1982/02silversubarusalvagepics012.jpg
PM ME about this if you can
thanks
eddie1982 06-14-2006, 06:15 PM I still need to know how big of a part it is and what they sell for new so I can get an idea on a shipped price.
Cam
$185 new on the expansion valve. Very Very small piece about the size of half of your pinky finger
eddie1982 06-14-2006, 06:16 PM we should work out something on the HVAC box it's a delicate piece and you could just let the entire piece go with out having to dismantle it.
ezekiel1059 06-14-2006, 06:23 PM pm sent for downpipe!
Aspen_2.5RS 06-14-2006, 07:25 PM we should work out something on the HVAC box it's a delicate piece and you could just let the entire piece go with out having to dismantle it.
That sounds like a better idea.
The following parts were shipped out today:
- driver front tgv sensor (Brian)
- center vent, center vent trim, and 2 trim rings (Matthew)
- wiper stalk (Jason)
- windshield washer cap (Travis)
Thanks,
Cam
Aspen_2.5RS 06-15-2006, 12:55 AM The power steering pump has been sold.
I still have lots of parts. Let's get this ish stripped!
Cam
strohausii 06-15-2006, 10:15 AM ;) the pal has been paid.
Aspen_2.5RS 06-15-2006, 11:43 AM Thanks Rob. I'll get those parts pulled and get you a tracking # as soon as they go out.
Cam
jland67 06-15-2006, 11:53 AM Cam,
How much for the front door panels?
Jeremy
dazani21 06-15-2006, 11:55 AM PM'd u
Aspen_2.5RS 06-15-2006, 12:09 PM Jeremy, I sent you a pm. Dazani21, I replied.
Cam
Aspen_2.5RS 06-15-2006, 05:15 PM I just shipped out the following:
-power steering pump (Wes)
-radio trim and coolant tank reservoir on the engine (Rob)
You both have tracking #'s in your pm's. Thanks,
Cam
Aspen_2.5RS 06-15-2006, 08:28 PM Come on guys, give me some parts to pull. I know you need them!
Cam
Porkchop-WRX 06-15-2006, 08:44 PM Whats the condition of the rear bumper? Mine is all scratched up.
Aspen_2.5RS 06-15-2006, 09:18 PM This one is scuffed as well. Sorry.
Cam
M.R.blue 06-15-2006, 09:32 PM do u have the brackets for the handles at the roof. it is between the headliner and the body, where the handle is attached. i wonder how much including the shipping to md 21204
Aspen_2.5RS 06-15-2006, 09:35 PM You need them for all the handles (just the brackets and no handles)? Shoot me a pm and we can probably figure something out.
Cam
singincanary 06-15-2006, 10:54 PM Looking for a full brake set up. Please let me know price and condition for all four calipers/rotors/pads shipped to 12586.
Kurokaze 06-15-2006, 11:48 PM How much to put the High pressure A/C value cap in an envelope and send it to 32312? Please PM me with any questions?
Aspen_2.5RS 06-16-2006, 12:16 AM Kurokaze, your pm box is full.
Cam
Kurokaze 06-16-2006, 01:06 AM Cleaned
clint8624 06-16-2006, 11:58 AM how about the brackets that hold on your hood scoop? i have an 05, will it work on my hood to hold an STi scoop on? thanks
Aspen_2.5RS 06-16-2006, 12:01 PM As stated in the list of sold parts: hood scoop and hardware have been sold.
Cam
Psipwrd 06-16-2006, 12:30 PM Hey, I'm from SC! Do you have the armrest? How much? PM me.
richde 06-16-2006, 03:12 PM How 'bout the windshield washer pump?
Aspen_2.5RS 06-16-2006, 04:39 PM How 'bout the windshield washer pump?
Yes, I have it.
I just shipped out the high pressure a/c cap. Thanks Bill.
Cam
pajak 06-16-2006, 04:47 PM sorry i didnt really read all of the posts that closly but do you still have the abs lines? I have the abs pump but not the lines that go into the halfshafts
ein86 06-16-2006, 10:08 PM :lol: :lol:
I just saw how you 3pelled my name on 3he bag....3ha3s pretty funny :lol:
3hanks for 3he bolts and 3he inlet 3ube
I'll get in 3ouch 3his weekend about 3he rest of 3he crap
STi-JDM 06-16-2006, 11:07 PM is it still in good condition?
http://i32.photobucket.com/albums/d32/STI_JDM/02silversubarusalvagepics015.jpg
if yes, let me know. I'm interested with the sidemirror too... and do you by any chance still have the seatbelt covers? (the small plastic pieces that covers bolts that connected to the pillars)
thanks
William
Dizmal 06-16-2006, 11:32 PM Drivers side brake light any good or FS yet?
crazyGC8 06-17-2006, 12:12 AM PM'D you.
Kaymin 06-17-2006, 02:12 AM ever find out if the crossmember was ok? PM me if it is?
Aspen_2.5RS 06-17-2006, 02:45 AM :lol: @ Gregg......3 thrast 3thrurious hehe
is it still in good condition?
http://i32.photobucket.com/albums/d32/STI_JDM/02silversubarusalvagepics015.jpg
if yes, let me know. I'm interested with the sidemirror too... and do you by any chance still have the seatbelt covers? (the small plastic pieces that covers bolts that connected to the pillars)
thanks
William
Sti-jdm, yeah they are all in good shape. I'd prefer to sell the mirror as a whole piece with those plastic covers. I do have the seatbelt covers as well.
Dizmal, I'd prefer to sell the tail lights as a set.
Kaymin, the xmember appears to be bent.
Cam
Edit: quoted STi-JDM to prevent an argument about what he asked for
STi-JDM 06-17-2006, 02:47 AM ^^^ I'll take it with the mirror... pm me the price of everything shipped to 98296... :) I'll take it if the price is right. thank you.
William
Dizmal 06-17-2006, 03:00 AM Well, what do you want for the set?
pm me an offer.
Aspen_2.5RS 06-17-2006, 03:24 AM Pm'd you both.
Cam
STi-JDM 06-17-2006, 03:45 AM Sidemirror & the covers sold to me... :D
flatbox 06-17-2006, 08:00 AM how about the tail light wiring harness both sides. just unplugs easily.
Aspen_2.5RS 06-17-2006, 11:58 AM Yep, sidemirror and covers sold to STI-JDM.
Flatbox, I'm waiting to hear back about the harness from someone.
Cam
flatbox 06-18-2006, 07:32 AM ok pm me a price if it becomes avil.
Aspen_2.5RS 06-18-2006, 10:27 AM They are available, sent you a pm.
Cam
strohausii 06-18-2006, 12:46 PM All parts received and in perfect condition yesterday afternoon. I appreicate the packing job you did, it really protected the radio trim!
Best of luck with your part out!
Rob
Aspen_2.5RS 06-18-2006, 02:22 PM No problem. Thanks, Rob.
Cam
Aspen_2.5RS 06-19-2006, 09:31 AM More parts are shipping out today: intake manifold, driver side mirror, bolt covers for seats, carpet clip, and the power steering reservoir with bracket.
There are still a lot of parts up for grabs.
Cam
Aspen_2.5RS 06-19-2006, 01:29 PM Those parts have been shipped. Check your pm's for tracking #'s.
Thanks,
Cam
OriginalRasta81 06-19-2006, 01:32 PM i was wondering if the front driver side brake caliper was damaged, and if not i would like dibs.. thanks
Aspen_2.5RS 06-19-2006, 01:36 PM Nope it wasn't damaged, it's still in good shape. I want to sell the front calipers as a pair, though. If you are interested in both of them, let me know.
Cam
Kurokaze 06-19-2006, 02:07 PM It came today. Thanks!
raykwok 06-19-2006, 04:36 PM a/c compressor? you wanna sell it if it's still working?
Aspen_2.5RS 06-19-2006, 05:34 PM Kurokaze, you're welcome.
Raykwok, I don't think it's any good. It spins, but gets to a certain point that's a little bit harder to turn past and then it spins freely again. You're welcome to it, but I can't guarantee it'd work.
Cam
dingobite 06-19-2006, 05:36 PM Do you still have the sensors that connect to the manifold.
The one im looking for is a little black box with a grey lid it is placed right in front of the turbo acuator and right below the green bracket. anyone of the sensors would problably work for me.
Aspen_2.5RS 06-19-2006, 05:40 PM Dingobite,
I do still have the sensors that connect to the manifold (I just sold the intake manifold bare). Are you talking about the tgv sensor on the passenger side rear? Shoot me a pm, we'll work something out.
Cam
dingobite 06-19-2006, 05:54 PM pm sent
DrBiggly 06-19-2006, 06:04 PM Cam,
Sent you some more money today; details in PM. :)
-Biggly
dingobite 06-19-2006, 06:11 PM Sent a second Pm with a pic linked.
Aspen_2.5RS 06-19-2006, 07:11 PM Thanks, Mike. I'm about to check it, dingobite.
Cam
dingobite 06-19-2006, 07:19 PM try right clicking the pic and click the show picture button ???
Aspen_2.5RS 06-19-2006, 07:28 PM Ok, it's showing up now. That's the tgv sensor. Sending you a pm.
Cam
Aspen_2.5RS 06-20-2006, 09:35 AM Pics of the heads if anyone is interested:
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxheads004.jpg
Good driver side head
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxheads002.jpg
Passenger side head - good combustion chamber
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxheads003.jpg
Passenger side head - broken valve/chewed up head
http://i16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/wrxheads001.jpg
Another shot of the passenger side head
illmattic016 06-20-2006, 11:24 AM Are the rubber plug/bolt things that hold the dead pedal in place available? As well as the 2 covers where buttons could be placed under where the e-brake area is? Hope those are good enough descriptions, PM me with a price.
Aspen_2.5RS 06-20-2006, 12:21 PM illmattic016, I replied to your pm.
I just shipped out the other tgv sensor - John, you have a pm with the tracking #.
Cam
Riot Type WRX 06-20-2006, 02:36 PM Cam,
I'm wondering if you have the front-passenger side window switch assembly. I don't think mine is functioning properly and would like to replace it, let me know if you still have this. It's just the electronic part, no need for cover and wiring.
Aspen_2.5RS 06-20-2006, 02:38 PM I've got it. I'm checking prices. I'll send you a pm shortly.
The clock/pod and front passenger window switch were just sold. Thanks, Ryan and Tate.
Cam
awdvf22 06-21-2006, 01:25 PM interested front door (driver side) and trunk pm with prices thanks
Aspen_2.5RS 06-21-2006, 01:27 PM The driver front door is pending as stated in the parts list. I'd rather not ship the trunk. I have enough local interest to sell it here, unless you want to pick it up.
I just shipped out the following:
-clock/pod - SOLD - Ryan
-passenger front power window switch - SOLD - Tate
-rear calipers w/ pads - SOLD - RJ
You guys all have pm's with tracking #'s. Thanks,
Cam
awdvf22 06-21-2006, 01:39 PM let me know if the door doesn't go through i will have it pick up, door and trunk no rush keep me posted pm prices thanks
DreddRS25 06-21-2006, 01:48 PM $200 shipped for front seats? Saw they are pending. Just wondering if sold.
Aspen_2.5RS 06-21-2006, 01:51 PM awdvf22, I pm'd you.
DreddRS25, I'm suppose to meet someone on Saturday that is taking the front seats.
Cam
7aSt129 06-21-2006, 02:04 PM do you still have the little rubber lining strip that is attached to the quarter panel fender(need driver side), let me know if you want to sell it!
Aspen_2.5RS 06-21-2006, 05:38 PM I do. Sent you a pm with pics.
Thanks,
Cam
DreddRS25 06-21-2006, 05:41 PM awdvf22, I pm'd you.
DreddRS25, I'm suppose to meet someone on Saturday that is taking the front seats.
Cam
Thanks for the reply.:)
Aspen_2.5RS 06-21-2006, 11:45 PM Np. ttt, get this stuff outta here!
Cam
Aspen_2.5RS 06-22-2006, 01:24 PM -turbo, uppipe, intercooler, bypass valve w/ hoses, injectors, fuel pump, rear sway, end links, & mounting brackets - SOLD and picked up -Thanks, Drew.
-rear 02 sensor - SOLD Thanks, Robert
Cam
Aspen_2.5RS 06-22-2006, 10:55 PM I sent you a tracking # for the rear 02 sensor (Robert), please check your pm.
Cam
ein86 06-22-2006, 11:17 PM hi cam :)
shem007 06-22-2006, 11:17 PM do you have a wrx badge?
Aspen_2.5RS 06-22-2006, 11:19 PM Yo Greggggg.
Shem007, I do. You can pm me if you want.
-maf, throttle cable, and power steering lines - SOLD - Thanks Shu
Cam
Aspen_2.5RS 06-23-2006, 05:27 PM I just shipped the following parts out. Please check your pm's for tracking #'s.
-front calipers w/ brackets - SOLD - sanchez
-rear rubber fender liners - SOLD - 7ast129
-dead pedal clips and 2 blanks from the center console - SOLD - Matt
-interior door handles with trim - SOLD - Brent
I still have lots of parts left.
Cam
Aspen_2.5RS 06-23-2006, 11:25 PM Bump,
Cam
Aspen_2.5RS 06-24-2006, 09:22 AM The front seats have been sold. Thanks, Brian.
Cam
Aspen_2.5RS 06-24-2006, 12:58 PM If you need parts, you need to speak up. This car won't be around for very long. Once the the wiring harness has been pulled I'm going to strip off some of the more valueable pieces and have the shell hauled off.
Cam
Jhawley 06-25-2006, 09:08 AM Hi how are you, I'm looking for the passenger sider mirror assembly if you still have it.. and also the rubber triangle seal around where the window is by that mirror if you have it. i can send u a pic if needed, and also im looking for theres a small clip in the engine bay.. on the passenger side the little black box that covers god knows what.. there are two little clips.... ill send pics if needed.
Thanks
Aspen_2.5RS 06-25-2006, 11:58 AM I have the passenger side mirror and the rubber triangle seal as well.
The clips that hold down the cover for the boost solenoid have already been sold, though. I'm sending you a pm now.
Cam
Aspen_2.5RS 06-25-2006, 07:15 PM Bump,
Cam
egytian2.5rs 06-25-2006, 08:16 PM pm sent
Jhawley 06-25-2006, 09:17 PM paypal sent
Aspen_2.5RS 06-25-2006, 09:47 PM Got it. I'll send you a tracking # when it goes out.
Cam
CunningLinguist 06-26-2006, 02:19 AM Did the battery tie down make it through the accident?
Aspen_2.5RS 06-26-2006, 10:27 AM Nope, sorry.
Cam
Aspen_2.5RS 06-26-2006, 04:09 PM The following parts have been shipped out:
-passenger side mirror with trim piece/rubber triangle - SOLD - Joseph
-trim piece in front of driver rear tire - SOLD - Shane
-a/c line from firewall to compressor - SOLD - John
Please check your pm's for tracking #'s (other than Shane).
Thanks,
Cam
Riot Type WRX 06-26-2006, 07:19 PM Got my passenger side switch a long time ago, forgot to leave feedback :D
Bump for you Cam!
Aspen_2.5RS 06-26-2006, 07:22 PM Thanks. I just left you some feedback as well. :)
Cam
Hank3 06-27-2006, 01:41 AM PM'd you.
Aspen_2.5RS 06-27-2006, 12:21 PM Replied through aim. Bump.
Cam
Aspen_2.5RS 06-27-2006, 09:14 PM Ecu Sold. Thanks Jamie.
Cam
Aspen_2.5RS 06-28-2006, 10:34 AM I'm hoping to be able to start selling hubs/suspension parts soon. I'm waiting to hear back from the person that is buying the harness (so I can pull the harness and push the car outside while it's still mobile).
Cam
YourMother'sLover 06-28-2006, 11:28 AM Do you still have the windshield washer pump/motor? If so, i'm interested.
Please PM me.
eddie1982 06-28-2006, 11:48 AM whats the word on the HVAC box i still want it.Also what about the sockets for the headlights that hold the bulbs in place.
Aspen_2.5RS 06-28-2006, 12:10 PM YourMother'sLover, I do have it, I sent you a pm.
eddie1982, I still have it. I was waiting on a picture of what you needed (you talking about the box under the dash the hamster wheel deal (lol) in it?) The sockets for the headlights are going with the harness.
I just shipped out the ecu. Thanks, Jamie. I pm'd you the tracking #.
Cam
Do you still have the blue AC cap? Pictured between the broken oil filler, washer tank and BPV. $5 shipped OK?
Aspen_2.5RS 06-28-2006, 12:59 PM MINO, I already sold that high pressure line cap, sorry.
Cam
Jhawley 06-28-2006, 06:16 PM Hey I got the mirror today thanks so much... quick question, how the hell do you install this thing, my door is in about a million pieces and i have no clue what im doing??? any her or pics would be great thanks
Jhawley 06-28-2006, 07:12 PM Hey never mind i managed to get it all back together... thanks so much for the mirror, great doing business with ya
Aspen_2.5RS 06-28-2006, 08:49 PM I'm glad you got it back together. Thank you!
I shipped out that seat belt tab for the passenger front earlier today. Rob, you have a pm with the tracking #.
Cam
Aspen_2.5RS 06-29-2006, 01:53 PM The rear diff has been sold. Thanks, Sam.
I'm going to start putting stuff on ebay, so speak up. I can't believe no one needs these door cards.
Cam
Aspen_2.5RS 06-29-2006, 02:45 PM I just shipped out the driver front seatbelt. Please check your pm Stuart for the tracking #.
Thanks,
Cam
Aspen_2.5RS 06-30-2006, 01:19 AM I still have doors, door cards, cd changer w/ speakers, taillights, etc. etc.
Come on guys.....I hate ebay, don't make me do it.
Cam
Aspen_2.5RS 06-30-2006, 11:09 AM Scooby03, please clean out your inbox. But, please check here for pics of the doors:
http://s16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/?sc=1&multi=3&addtype=local&media=image
I doubt you'd want the front passenger side door as it is dented up and scratched, but the rear could still be used, even though it is scratched some and has a ding or 2.
Cam
03blkwrx 06-30-2006, 11:18 AM how much for the rear driverside door? i dont think i would need the glass...
thanks
Aspen_2.5RS 06-30-2006, 11:38 AM 03blkwrx, you have a pm.
Cam
redsube' 06-30-2006, 12:32 PM Interested in sunvisors, if they are in decent condition
getting tired of wearing sunglasses all the time
Aspen_2.5RS 06-30-2006, 12:44 PM redsube', I pm'd you.
I just sent the rear diff out. Thanks, Sam. I pm'd you the tracking #.
Cam
Aspen_2.5RS 07-01-2006, 02:40 AM bump,
Cam
wrx_sam 07-01-2006, 03:58 AM Thank you so much Aspen! This guy is great to deal with guys.
I'll let ya know when i get the differential. Should be here in no time.
nomex ninja 07-01-2006, 09:31 AM How much for the automatic window switch in the Drivers side door card?
Thanks - Enrico
wrx_sam 07-01-2006, 12:15 PM diff showed up at my door this morning. this guy's awesome, you can'T go wrong dealing with him
:banana:
Aspen_2.5RS 07-01-2006, 12:17 PM Thanks Sam.
Cam
Edit: I sent you a pm, Enrico.
Aspen_2.5RS 07-01-2006, 06:30 PM Bump, lots of parts left. If you don't see it in the list (but please read through the list first), just shoot me a pm.
Cam
Pacobeagle 07-02-2006, 07:42 AM Longshot, but do you have the oem fog lights and brackets? Oh, would you part with the turbo inlet hose(underneath intake manifold)?
PM me please
Local_Skater 07-02-2006, 09:19 AM How much for the rims and do you have a pic?
Aspen_2.5RS 07-02-2006, 12:01 PM Guys, please read through the list. The fogs/brackets are unavailable and the turbo inlet hose has already been sold.
Local_Skater, $400 for the rims/tires picked up. Pictures can be found here: http://forums.nasioc.com/forums/showthread.php?t=1014089
Thanks,
Cam
Local_Skater 07-02-2006, 02:58 PM I'd be all over that, but I'm too far :(
Aspen_2.5RS 07-02-2006, 10:36 PM Bump.
Cam
Aspen_2.5RS 07-03-2006, 11:59 AM ttt,
Cam
Aspen_2.5RS 07-03-2006, 02:25 PM Ashtray sold and shipped out. You have a pm with the tracking #, Ryan.
Cam
Aspen_2.5RS 07-03-2006, 03:30 PM I updated the first page with lots of pics! Check it out.
Cam
Aspen_2.5RS 07-03-2006, 07:08 PM ttt,
Cam
Aspen_2.5RS 07-04-2006, 04:12 PM ttt,
Cam
Aspen_2.5RS 07-04-2006, 11:16 PM and up again,
Cam
STi_671 07-05-2006, 03:12 AM Omg Omg Please Tell Me U Still Have The Trunk
STi_671 07-05-2006, 03:13 AM pictures of trunk!!!
Aspen_2.5RS 07-05-2006, 11:35 AM http://s16.photobucket.com/albums/b26/Camshaft2/02%20Silver%20salvaged%20WRX%20for%20sale/?sc=1&multi=3&addtype=local&media=image
Pictures are there of the trunk and the dings/imperfections. It's going to be a long drive from Utah to pick it up.
Cam
WRX-ECE 07-05-2006, 12:04 PM Cam,
PM sent too.
I need:
Pass front window
Pass side plastic trim that goes on outside of car on b piller between the windows (it's black)
Pass side front window gasket
fuel filler trim (black plastic that goes around the fuel filler under the door)
rear subframe
<edit>
I also need the rear drivers side interior door card
</edit>
Please let me know prices to 18018
Thanks,
Jeremy
Aspen_2.5RS 07-05-2006, 12:37 PM Pm'd you back.
Cam
STi_671 07-05-2006, 02:00 PM how much are u willing to let the trunk go if u ship it? "IF"
Aspen_2.5RS 07-05-2006, 02:05 PM Do you realize how much shipping stuff is from SC to Utah? It's not cheap at all. It would be an oversize item also. I'd rather sell it to a local for $100 and not have to deal with it.
Timmyp, you have a pm with the tracking # for the gauge cluster. Thanks,
Cam
STi_671 07-05-2006, 02:06 PM yeah i kno its cool tho thats why i put the big "IF"
Aspen_2.5RS 07-06-2006, 12:29 AM ttt,
If anyone still needs a passenger front window, I have another one from the last car I parted out as well.
I should have it moved outside within a week or so to start stripping off things likes hubs/knuckles/lateral links/rear subframe etc.
Anyone want the shell?
Cam
DrBiggly 07-06-2006, 09:40 AM Cam,
I don't know if I asked this already or not but do you have the rear lateral links on the car? :)
-Biggly
Aspen_2.5RS 07-06-2006, 10:34 AM Yeah, you asked me earlier about them. The most rear driver side one is bent. The passenger side ones are good.
Cam
DrBiggly 07-06-2006, 01:04 PM Yeah, you asked me earlier about them. The most rear driver side one is bent. The passenger side ones are good.
Cam
Oh that's right. DOH. :)
-Biggly
Aspen_2.5RS 07-06-2006, 04:55 PM Rear seat - Sold. Thanks, Andrew.
Cam
outlaw469 07-06-2006, 10:21 PM do you still have the sotck BOV?
george2 07-06-2006, 11:39 PM Do you have the RSB with endlinks and brackets?
Aspen_2.5RS 07-07-2006, 01:52 AM Come on guys, read the list of what has been sold. I'm not updating it for no reason.
Cam
Aspen_2.5RS 07-07-2006, 02:55 PM ttt,
Cam
Aspen_2.5RS 07-07-2006, 08:06 PM up you go,
Cam
Mighty Subie 07-08-2006, 03:41 AM Do you still have the front drivers stide transaxle (cv joint), is it damaged or in good shape? If you do, how much shipped to 04106?
-Matt-
:EDIT: send me a PM with details plz.
Aspen_2.5RS 07-08-2006, 04:35 PM I do. Pm'd you.
Cam
Aspen_2.5RS 07-09-2006, 04:14 AM ttt,
Cam
Aspen_2.5RS 07-09-2006, 10:05 PM up,
Cam
vrivilla 07-09-2006, 10:14 PM Looking for the accessory belt tensioner seen here:
http://images.kodakgallery.com/photos2096/9/85/40/23/93/0/93234085909_0_ALB.jpg
how much shipped to 91030?
Thanks!
Victor
PS. reply to vrivilla@socal.rr.com
Aspen_2.5RS 07-09-2006, 10:17 PM Pm'd you back.
Cam
Aspen_2.5RS 07-10-2006, 01:22 PM Matt, your front axle went out today. Please check your pm for the 2day air tracking #.
Jeremy, All of your parts went out today except for the rear subframe. I pm'd you the tracking #'s for both of those shipments.
Thanks,
Cam
Aspen_2.5RS 07-10-2006, 11:09 PM Ok, the car is now outside, so the knuckles/hubs/suspension components are now available.
Cam
ycatsce 07-11-2006, 11:47 PM If ya still have it, could ya PM price for the cup holder (alone or with full trim piece).
Air freshener spilled and ate down into my plastic :furious:
Aspen_2.5RS 07-12-2006, 03:29 AM Cupholder has been sold along with all that trim as stated in my first post.
The following parts were shipped out today: rear subframe, passenger rear lateral links, passenger front control arm, passenger trailing arm, tensioner part that the long ass bolt threads through, and hvac controls. I'm pming you with tracking #'s now. Thanks,
Cam
Aspen_2.5RS 07-12-2006, 02:37 PM up up
Cam
crump582 07-12-2006, 03:15 PM Do you have floor mats?
PM me if they are still there...
Aspen_2.5RS 07-12-2006, 09:20 PM Pm'd you.
Cam
davejread 07-12-2006, 09:46 PM do you happen to have a full window controller for either rear door? looking for the entire piece from the large plastic bit that snaps into the door all the way to the plug that plugs into the wire harness. thanks.
Aspen_2.5RS 07-12-2006, 10:04 PM I sure do.
Cam
renegade_00 07-12-2006, 10:32 PM Interested in the stock air box/snorkel/silencer and any hoses and bolts needed. Looking to go back to stock from an injen CAI
dingobite 07-13-2006, 11:31 PM Wondering if you still have the up-pipe/downpipe brace still that hooks up to the motor.
Its located right under the coolant line to the turbo has two bolts that seats it to the up-pipe and engine. Right where you can see the two turbo/uppipe bolts its the brace that use the other two bolts.
|