Do anyone know where I can install the Auto Gauges at MA area? I have really hard time to find someone to install it... Someone help me!!
Kim

Which gauges? and where do you want them?

-Paul

The gauges housing - oil temp, oil press and boost. I bought from my friend
Kim

Get the gauge plate from derres, it's $55 and high quality, It's also a must have to do the install. As far as installing the gauges you just need some adapters and hose and you are all set. If you wanted to make the trip I could help you out with it. It only took me about 15 minutes to hook up my boost gauge.

If you think you can install it by yourself, try my site. I have oil pressure gauge installation:
http://www.geocities.com/matsut_rpi00

Click on Mods, then Autometer.

It's not hard at all. You just need time (2 hours or so) and right tools.

Vacuum gauge is the easiest of all. Temp gauge can be tricky if you want the gauge to read correctly because oil drain pan needs to be drilled for correct temperature readings. But, I think you can get away with hooking up the temp sensor at the oil pressure pick up point.

Thank for the info, tmat3 and paulnose. I think I should installl by myself!!!:D
Kim