I'm going to be building up a broken 5spd with PPG's and will be looking to sell my 06 WRX transmission. Transmission shifts perfect and have not abused it, too afraid to. Getting a full dogbox. It only has about 8k miles on it.

Looking for some offers.

does that trans fit a 04 wrx?

its the same thing right?

Hey i have got the deal for you, i have a broken 02 tranny i could send you to knock down the price some pm me and let me know

I need a tranny soon.......

The '06 WRX 5 speed has a 3.7 final drive as opposed to the '02-'05 which are 3.54

also speed sensor in 06 is in the bearings....so therefore the 06 trany does not have a speed sensor =)...

The '06 WRX 5 speed has a 3.7 final drive as opposed to the '02-'05 which are 3.54
The 3.54 is for the rear diff ratio on 02-05. The transmission itself has a 3.9 ring and pinion for the WRX and non-turbo wagon models, 4.11 for the non-turbo sedan. There is a 1.1 reduction gear to match the transmission's 4.11 to the rear diff of 3.54 (4.11 / 1.1 = 3.545~). Non WRX imprezas and have a different clutch linkage.
I don't know about the new '06 models, but 3.54 is the rear reduction drive and 3.9 is for the transmission ratio on 02-05.

The '06 WRX 5 speed has a 3.7 final drive as opposed to the '02-'05 which are 3.54

02-05' are 3.9 :rolleyes:

Yeah, I totaly know that too, just spaced when I typed it out. we all make errors from time to time. I meant to do a longer post about the US WRX transfer case being 1.1:1 and the rear diff being 3.54 then wondering if the new tranny is 1:1 or not . and just ended up hosing the whole post.

Granted I did mess up my first post on the final of the WRX. But the only the 02'-05' wrx trannys have the 1:1.1 reduction, the non turbo sedans are 4.11 front and rear with a 1:1 transfer. It is 3.90/1.1 that equates 3.54~ not 4.11/1.1 that would be 3.736, see how easy it is to post the wrong number when composing your thoughts to wrinting.

Sorry for hyjacking your thread Paintballguy

The 3.54 is for the rear diff ratio on 02-05. The transmission itself has a 3.9 ring and pinion for the WRX and non-turbo wagon models, 4.11 for the non-turbo sedan. There is a 1.1 reduction gear to match the transmission's 4.11 to the rear diff of 3.54 (4.11 / 1.1 = 3.545~). Non WRX imprezas and have a different clutch linkage.
I don't know about the new '06 models, but 3.54 is the rear reduction drive and 3.9 is for the transmission ratio on 02-05.

still wont work.....speed sensor.....

there must be a way to rig the speed sensor to work with the 02-05 cars.

Yeah, I got some bad 411 in my post about the 3.9.

Heh, I made an almost funny.

The 06 WRX's also use a push style clutch (the same setup that all of the NA cars from 1990-current use, along with the 2005 and newer Legacy GT's and Outback XT's) All of the other turbo cars use a stronger push style clutch (1991-1994 Turbo Legacy, 2002-2005 WRX, 2004-current STI)...

Best bet is to find someone with an 06 wrx who needs a tranny :)

so the transmission is in good workin order...shifts smooth?no gears out..how much for the tranny and shipping to 26847