Daddy's SCP
08-23-2006, 11:56 PM
It's funny. Somehow I always forget there are "regional" vendor for sale forums. So for all you MA. and NH. folks we're located in Leominster, MA. about a 1.5 miles off the RT13 exit(exit 32) on RT 2.
Borla:
We just a a fresh shipment of Borla Hush, STi, and Legacy GT catbacks in stock. We've also got a few of our 3" Borla adapters on hand as well. There have been several price jumps on Borla product over the past few months and you've no doubt seen the price increases from many vendors. For the best deal off our website use the following coupon codes: HUSH or STI . I think you can figure out which one. They will net you an additional $30/$40 off the price listed on our website. Your welcome to arrange a pick up to avoid the shipping fees. I also have a couple of Borla Headers in stock for WRX/STi and RS/TS/CG8.
MadDad:
MadDad Metal V2 Downpipe - For the first time since I can remember we actually have MadDad Metal V2 downpipes in stock with no back orders. This is the newest one-piece version with the addtional 02 bung and revised wastegate separator place for plug and play fitment for the STi as well as WRX. The one-piece version of this downpipe ends in a 3" flat flange(no donut gasket taper) so you will want to mate it with a full 3" catback. - $579
MadDad Whisper 2.5" axleback - This is by far the safest way to get a fantastic charismatic sound out of your car without the fear some guys in blue are going to ticket you for the db level. The 3" Whisper catback made a very quick reputation for itself as being one of the most refined and moderate/low-volume 3" catbacks available and the 2.5" bolt-on axleback is a tad quiter but no less charismatic. You'll love the sound. Take it as a axleback only for $389 or a 2.5" Catback for $539.
MadDad Hi-Flow Metal Substrate Secondary Catpipe - this is a last cat replacement pipe that replaces the last cat in the chain with a hi-flow metal substrate version. The same cat used in the MadDad Metal V2 downpipe. But there area a couple of MadDad tricks up its sleave. Because metal substrate cats often are not even seen as being a cat from a visual standpoint we've wrapped the metal substrate cat with a heatshield used for a conventional ceramic cat so any visual inspection will see a more obvious looking piece. But wait there's more...we've relocated the rear 02 sensor so that it now comes after the cat(comes before it on the factory last cat pipe). Why? To elimiated cells associated with running a catless shorty downpipe. Mate this pipe with a Stromung downpipe and you've got a really slick divorced wastegate downpipe with metal substrate cat for $529. We have a combo in stock with a ceramic coated Stromung shorty downpipe and this hi-flow secondary that can be had for $579. We've got 3 available right now in this combo.
MadDad 21mm/22mm front/rear sway bars. - for the average street enthusiast or daily commuter this 21/22mm fixed rate combo gives immediate handling results without being too twitchy come winter(as larger bars can be). Perfect fitment, thick blue enamle coating looks great under the car, best of all at $219.95 for both(will be creeping to $239 soon) they are a steal.
MadDad Road Hugga Progressive rate springs - I've had these on my car for over a year now and I still love how the car handles(along with the bars of course). The progressive rate give a nice compliant ride of our less than perfect roads, yet still makes an immediate difference in the hangling of the car. These are designed for the street enthusiant vs. weekend racer 02-03 model year only - $219.
Check out the website and ping me if there is anything you need. We stock every gasket(except donut gasket) as well. We even stock sometimes hard to find 3" two bolt gaskets. Our turbo to downpipe, uppipe, and header gaskets are all super high quality 5-layer metal units.
I'll update the thread with some pics as soon as I find some time(yah right).
Rich
www.daddysscp.com
Borla:
We just a a fresh shipment of Borla Hush, STi, and Legacy GT catbacks in stock. We've also got a few of our 3" Borla adapters on hand as well. There have been several price jumps on Borla product over the past few months and you've no doubt seen the price increases from many vendors. For the best deal off our website use the following coupon codes: HUSH or STI . I think you can figure out which one. They will net you an additional $30/$40 off the price listed on our website. Your welcome to arrange a pick up to avoid the shipping fees. I also have a couple of Borla Headers in stock for WRX/STi and RS/TS/CG8.
MadDad:
MadDad Metal V2 Downpipe - For the first time since I can remember we actually have MadDad Metal V2 downpipes in stock with no back orders. This is the newest one-piece version with the addtional 02 bung and revised wastegate separator place for plug and play fitment for the STi as well as WRX. The one-piece version of this downpipe ends in a 3" flat flange(no donut gasket taper) so you will want to mate it with a full 3" catback. - $579
MadDad Whisper 2.5" axleback - This is by far the safest way to get a fantastic charismatic sound out of your car without the fear some guys in blue are going to ticket you for the db level. The 3" Whisper catback made a very quick reputation for itself as being one of the most refined and moderate/low-volume 3" catbacks available and the 2.5" bolt-on axleback is a tad quiter but no less charismatic. You'll love the sound. Take it as a axleback only for $389 or a 2.5" Catback for $539.
MadDad Hi-Flow Metal Substrate Secondary Catpipe - this is a last cat replacement pipe that replaces the last cat in the chain with a hi-flow metal substrate version. The same cat used in the MadDad Metal V2 downpipe. But there area a couple of MadDad tricks up its sleave. Because metal substrate cats often are not even seen as being a cat from a visual standpoint we've wrapped the metal substrate cat with a heatshield used for a conventional ceramic cat so any visual inspection will see a more obvious looking piece. But wait there's more...we've relocated the rear 02 sensor so that it now comes after the cat(comes before it on the factory last cat pipe). Why? To elimiated cells associated with running a catless shorty downpipe. Mate this pipe with a Stromung downpipe and you've got a really slick divorced wastegate downpipe with metal substrate cat for $529. We have a combo in stock with a ceramic coated Stromung shorty downpipe and this hi-flow secondary that can be had for $579. We've got 3 available right now in this combo.
MadDad 21mm/22mm front/rear sway bars. - for the average street enthusiast or daily commuter this 21/22mm fixed rate combo gives immediate handling results without being too twitchy come winter(as larger bars can be). Perfect fitment, thick blue enamle coating looks great under the car, best of all at $219.95 for both(will be creeping to $239 soon) they are a steal.
MadDad Road Hugga Progressive rate springs - I've had these on my car for over a year now and I still love how the car handles(along with the bars of course). The progressive rate give a nice compliant ride of our less than perfect roads, yet still makes an immediate difference in the hangling of the car. These are designed for the street enthusiant vs. weekend racer 02-03 model year only - $219.
Check out the website and ping me if there is anything you need. We stock every gasket(except donut gasket) as well. We even stock sometimes hard to find 3" two bolt gaskets. Our turbo to downpipe, uppipe, and header gaskets are all super high quality 5-layer metal units.
I'll update the thread with some pics as soon as I find some time(yah right).
Rich
www.daddysscp.com