hey guys,

i was just wondering why my turbo timer counting up. i already have it for 6months and never had a problem until 2days ago. i double check the wiring and everything is ok; no expose wires at all.. what could be the problem? any help would be appreciated.

thanks in advance.

even the setting is set to zero mins/sec. it does the same thing when its stationary.

you didnt specify what brand tt

sorry its greddy tt.

is it possible that the harness is bad?

it could be the vac hose. check the line and make sure its connected tight. I had the same problem because my hose was loose, secured it and it calculated the time correctly again.

hope that helps. gl.

edit: not sure if your tt is runnin off of vac hose or ecu. if its runnin off the ecu then im not sure what it could be

^^^
i had the same issue with the blitz, my boost line fell off, and the timer continued to go up.

mine is not running off the vac hose is through the ecu.

hmm... what else.

mine is not running off the vac hose is through the ecu.

hmm... what else.
You tapped into the wrong sensor wire on your ECU I believe.

i double check it... its on the third row, second column... its the blue wire. if i recall it right.

i tried not wiring the ecu and it still counts by itself. its gotta be something.

i double check it... its on the third row, second column... its the blue wire. if i recall it right.
well you should double check.