View Full Version : Parting 1994 Subaru Impreza Sedan, CO
lmdew 11-04-2006, 06:28 PM Parting 1994 Subaru Impreza Sedan.
Light blue, gray interior, 5 speed Transmission AWD, rear drum brakes. Light hit in the front, all other body panels are in good shape. What do you need? Located in Colorado Springs, CO 80916. Email: Lmdew@hotmail.com
The 1.8 engine is what I'm using out of it.
The car has 129K on it. I have not had it on the road as it has no title.
evoeater02[wrx] 11-04-2006, 07:07 PM how many miles on the tranny? syncros and all gears still shift smooth? how much do you want for the tranny shipped to 95658?
thanks, Jack
PhilSine 11-06-2006, 02:51 AM What kind of shape are teh fenders in and will they fit on my 98 Outback?
And also, how much to ship to 54880?
limestoner 11-06-2006, 02:58 AM how much for the clutch slave cylinder?
lmdew 11-06-2006, 07:05 AM Sorry the fenders will not fit. I believe it has the cable clutch. I'll double check and if it has the slave its your's $15.
limestoner 11-07-2006, 02:24 AM just PM me.
bigboss 11-07-2006, 07:33 PM did it have an armrest??? if so how much to 53223???
lmdew 11-10-2006, 07:35 AM Sorry, no arm rest
jackedaw11 11-14-2006, 05:27 PM Will the rear diff fit in a 95 L? (2.2 liter motor if that makes a difference)
thx,
ben
lmdew 11-14-2006, 08:29 PM It would fit, the trans diff and the rear diff need to be the same ratio for the AWD to work correctly.
lmdew 11-19-2006, 08:32 PM I've pulled alot of the good parts.
Trunk
Rear Bumper
5sp and rear diff and shafts
Seats
Dash
Doors are OK, but I have not pulled them.
$10 each if you pick them up.
Any other parts let me know by Monday!
darkxkyo 11-20-2006, 04:27 AM Is the Rear diff bracket available? how much shipping to 11214? Can you send me pics of the fenders? darkxkyo@aol.com
lmdew 11-20-2006, 07:23 AM Which one are you looking for:
- Forward Tee support
- Rear main cross member
- Bottom small cover plate
Shipping of the large one will be costly due to size and weight. Yes, I have them all in rust free condition.
bigboss 11-20-2006, 08:41 PM howbout ashtray and cigar lighter to 53223???
lmdew 11-21-2006, 07:09 AM Sorry the Ash tray and Stuff went to Legacy 777
darkxkyo 11-21-2006, 04:27 PM Which one are you looking for:
- Forward Tee support
- Rear main cross member
- Bottom small cover plate
Shipping of the large one will be costly due to size and weight. Yes, I have them all in rust free condition.
I recently got an AWD conversion (rear discs, read diff, driveshaft, axles) and Im looking for the cross member.
lmdew 11-22-2006, 07:43 AM I've got all three parts that hold the rear diff in. They are heavy so shipping will not be cheap. Rust free condition very good shape, $60 + shipping. I can strap them to a pallet and send them out from a shipping dock. 80916 is the zip. I would guess 100 lbs and 48x30x16.
darkxkyo 11-22-2006, 05:55 PM I've got all three parts that hold the rear diff in. They are heavy so shipping will not be cheap. Rust free condition very good shape, $60 + shipping. I can strap them to a pallet and send them out from a shipping dock. 80916 is the zip. I would guess 100 lbs and 48x30x16.
Some parts came with my diff. If you took out the parts already, can you get some pictures so i can check which part I dont need? Thanks
beat22 11-23-2006, 06:41 PM price on tranny shipped to 12180 troy ny plz
lmdew 11-23-2006, 10:34 PM I'd take $100 for the Trans, but the shipping will be close to $200. I'd think you would be able go get one closer to you for less.
lmdew 11-25-2006, 11:22 AM Pics of Rear Diff Support Sent
mybluesubi 12-05-2006, 12:17 AM if you still have the rear diff and it's a 3.90 i'm interested and I'm in Grand Junction so I could come get it. I can't find any info on the 94 imprezas as far as gear ratios go but I can't imagine they'd put a 3.90 with a 1.8 litre cause the 2.2 has a hard enough time holding the 3.90 at freeway speed
lmdew 12-05-2006, 07:11 AM Just counting the input to output its a 4.11. I have the trans as well.
sick boy 12-05-2006, 10:35 AM Any way I can snag the front left control arm? Need it by this weekend.
mybluesubi 12-05-2006, 11:48 AM how much you willing to sell the tranny and diff for? I wonder how many rpm's I'd be pulling at 80 with a 4.11
lmdew 12-07-2006, 07:08 AM All Parts are Gone, sold or given away!.
istealfrombums 12-07-2006, 09:27 AM Does the 94 have passenger airbags, if you do anypics?
lmdew 12-07-2006, 09:02 PM Just the Drivers in the Steering wheel. Sorry
looking for rear lateral links, the ones with swaybar mounts, do you have those? If so, price w/shipping to 17015?
Homemade WRX 12-27-2006, 03:15 PM do you still have the rear deck (speaker covers, brake light and deck cover)? Also need the rear set belts and plastic piece that covers the c-pillar and runs along the roof to the b-pillar. Also the oh sit handles :p
yes, I have quite a list.
Thanks, Micah
lmdew 03-25-2007, 09:15 AM Rear bumper - 50
Rear Deck/Trunk lid - 35
Sedan Tail Lights - 40
Front and Rear Cross Members - 20
Drive Shaft - 15
Master Cylinder - 25
1.8 Wiring Harness and ECU - 20
Dash - 30
Gauges - 30
Lower A arms - 15 ea
All Parts + shipping from 80919
sheepdog 03-25-2007, 11:41 PM Do you have the door sills and clips still?
lmdew 03-26-2007, 09:03 AM Sorry, just the listed parts
tagrp 03-28-2007, 10:03 PM Pedal cluster clutch/brake/gas?
lmdew 03-28-2007, 11:03 PM Yes, I have the brake box. How's 40 shipped?
sheepdog 03-29-2007, 12:58 AM Does it have power door locks and windows by chance? Theres a particular harness plug I need....
lmdew 03-29-2007, 07:13 AM Yes, it did and I've pulled most of the wiring. Do you want the complete harness? About 40 lbs of wiring.
sheepdog 03-29-2007, 11:56 AM I actually only need the plug from the drivers side door that plugs into the window/door lock control box, if they are one unit. If they are, would you be willing to cut me off that one piece?
lil WRXer 760 04-02-2007, 12:40 AM Didnt read the whole thread but do you have the front passenger side A-arm and the front swaybar and endlinks?
Also, front fenders or front bumper?
I have a 95 L wagon
lmdew 04-02-2007, 07:43 AM I have the control arms, might have the sway bar. I'm out of town for the week, so I'll have to check. Shoot me an offer on the control arm/s at Lmdew@hotmail.com
Larry
harowerksxcr 04-18-2007, 10:25 AM I need an ecu for a 1.8. I'm local (well golden actually) What would you want for just the ecu? I can come pick it up today.
Hyper 04-19-2007, 01:18 AM do youhave the trunklid weatherstrip?
lmdew 04-19-2007, 07:22 AM I have the complete trunk lid but not the weather strip.
I have the ECU for you.
Sleepypreza1227 05-29-2007, 07:20 PM Hows the hood look? Do you think it would fit a 96 legacy sedan? thanks.
Sleepypreza1227 05-30-2007, 07:41 PM how much for the windshield?
maxaud 07-08-2007, 03:52 AM I need both the drivers and passenger airbag COVERS, let me know if you have them and for how much.
thanks.
Jdawg76 07-09-2007, 06:34 PM I'd be interested in the wiper motor and linkage, if still available. Shipping to 30134.
Thanks!
RS22b 07-15-2007, 02:14 PM ok i know its kinda late in the game here and i see the list of things you have posted.
Do you still have the wiring harness? interested in that for sure.
And looking to see if you have the midpipe and muffler still?
Thx.
_billy
lmdew 07-18-2007, 08:47 PM Yes and Yes.
$60+shipping.
Let me know what part of the wiring harness you need.
Larry
Lmdew@hotmail.com
RS22b 07-19-2007, 11:29 AM sent you an email.
thx.
_billy
93prjktL 07-26-2007, 11:30 AM another player to hit this late in the game.
You got any more parts for an AWD swap? Could possibly be looking for the fuel tank (never heard mention you had it so not sure) rear diff, tranny, everything. IF you still have any of it.
am highly interested.
email me at madhatter3601@hotmail.com
(i need awd and a new motor by x-mas haha) and do you still have the trunklid? and is it white? and is the paint good or real chipped?
JTJ 2.5 07-26-2007, 12:07 PM I'm looking for a single stage Brake Booster, Do you have one?
uberspeed 07-26-2007, 01:12 PM Did you get my PM?
downshift1 08-03-2007, 01:53 AM Is the dash light grey or dark grey?
$900scoob 09-06-2007, 05:12 PM PM sent
myfastwrx 09-08-2007, 02:40 PM rear cat?
Danmaku 09-13-2007, 10:18 PM Do you have the gauge cluster, if so how much shipped to 53179?
|