Ok, so I am in the middle of a 06 STi EVERYTHING (wiring also)->02 WRX wagon.

1.) I need the wiring diagram for the 06 STi airbag system (specifically the airbag control module)?

2.) My wiper refuse to turn off. (The donor car had the airbags blown, I don't know if this has anything to do with it)?

3.) My 02 Cibie fogs refuse to work. I could have swarn I wired up the relay, switches, etc from the 02 right. Is there anything I am overlooking on the 06 STi wiring?

4.) There are tons of threads about putting resistors in the airbags (I want to resist them until my SRS parts roll in), but where and how (as in which connector and which pins) do I actually do it? Also am I using 3.3 Ohm or 10 Ohm resistors.

5.) The STi driver airbag has blown, but because of the heat of the airbag explosive the 2 molex connectors that plug into the airbag itself are melted into the airbag. I can see that one disconnects somewhere before the clock spring, but I have no idea where the other molex connector runs to. Is that set of wires run into the main harness? And if it is where the deuce do I get the right connectors?

Thanks in advance. The car is up and running (and fast), but I have some electrical gremlins to troubleshoot. Please give me a hand, I have been working day and night on it for 2 weeks:p

-John