I had a link that had all the specs for a Ej20G from australia, but cant find it now. But im looking for the coil spec in ohms for resistance for the coils.

thanks
kirill

I had a link that had all the specs for a Ej20G from australia, but cant find it now. But im looking for the coil spec in ohms for resistance for the coils.

thanks
kirill

Hey Kirill,
Primary Resistance, between terminals one and two, should be 0.7 Ohms, Secondary Resistance, between terminal one and spark plug terminal should be 13.8K Ohms, you should have ten volts at terminal one with the ignition on.

Hope this helps

Cheers
Sixpack

one of my coils has .9ohms in the primary. Should i replace it?

one of my coils has .9ohms in the primary. Should i replace it?

Only if it's actually playing up. The FSM's don't give any tolerence or variables for the figures.

one of my coils has .9ohms in the primary. Should i replace it?

Could be within the error of your meter or probes. Try with a different meter to be sure.

-Rob