PSM-04-STi
11-18-2006, 11:33 PM
http://www.forcedinductions.com/images/eboost2_lineup.jpg
additional accessories that can be bought seprately
http://www.capa.com.au/pics/turbo_wastegates_turbosmart_eboost2.jpg
$380 picked up, $395 shipped
MSRP is $600
e-Boost2 is a natural evolution of the original e-Boost. The feedback provided by the users proved invaluable for continual development of the product with many of the suggestions being incorporated into the final design of the second-generation unit.
e-Boost2 puts the user in total control of his/her turbocharger. With a host of new features and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have! Easy to use, yet sophisticated and technologically advanced, the e-Boost2 is equally at home in a street-going vehicle as it is in a top-level racecar.
It's a tach!
e-Boost2 displays RPM with a much greater accuracy than the common analogue tachometer!
It's a boost gauge!
With high accuracy boost and vacuum display, e-Boost2 outperforms most analogue boost gauges!
It's a shift light!
With an optional single or double LED ring, e-Boost2 controls up to 2 warning/shift lights!
It's a NOS switch!
With a fully programmable auxiliary output e-Boost2 gives you control over water spray, methanol or nitrous injection!
It's the mother of all Boost Controllers!
Up to 6 alternate boost mapping functions with specific boost mapping for FWD, RWD, AWD, Bike and Drag racing applications.
A specifically developed Correction Feature eliminates boost drop-off at high RPM
Boost levels can now be mapped against TIME or RPM
Special gate pressure function eliminates wastegate creep
Peak Hold/Max Boost Recall function monitors the boost and RPM
The display can be configured to KPA, Bar or PSI
Features
Choice of 40 or 60-psi models
Choice of bezel/face colour combinations
Back-lit, easy to access function buttons
Auto dimming
Programmable audible warning alarm
Advanced short circuit protection
Suitable for panel, gauge pod or pillar mounting
Easy to read, 7-segment display with bar graph
Housing and accessories made out of tough, billet aluminium
Optional Accessories
Single or double LED ring. Available in bezel-matching colours
Shift/warning lights complete with a plug-in wiring loom, available in four colours (Red, Green, Amber, Blue)
Remote-mount shift light
Dash mounting kit. Tough and sturdy with tilt and directional adjustment
additional accessories that can be bought seprately
http://www.capa.com.au/pics/turbo_wastegates_turbosmart_eboost2.jpg
$380 picked up, $395 shipped
MSRP is $600
e-Boost2 is a natural evolution of the original e-Boost. The feedback provided by the users proved invaluable for continual development of the product with many of the suggestions being incorporated into the final design of the second-generation unit.
e-Boost2 puts the user in total control of his/her turbocharger. With a host of new features and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have! Easy to use, yet sophisticated and technologically advanced, the e-Boost2 is equally at home in a street-going vehicle as it is in a top-level racecar.
It's a tach!
e-Boost2 displays RPM with a much greater accuracy than the common analogue tachometer!
It's a boost gauge!
With high accuracy boost and vacuum display, e-Boost2 outperforms most analogue boost gauges!
It's a shift light!
With an optional single or double LED ring, e-Boost2 controls up to 2 warning/shift lights!
It's a NOS switch!
With a fully programmable auxiliary output e-Boost2 gives you control over water spray, methanol or nitrous injection!
It's the mother of all Boost Controllers!
Up to 6 alternate boost mapping functions with specific boost mapping for FWD, RWD, AWD, Bike and Drag racing applications.
A specifically developed Correction Feature eliminates boost drop-off at high RPM
Boost levels can now be mapped against TIME or RPM
Special gate pressure function eliminates wastegate creep
Peak Hold/Max Boost Recall function monitors the boost and RPM
The display can be configured to KPA, Bar or PSI
Features
Choice of 40 or 60-psi models
Choice of bezel/face colour combinations
Back-lit, easy to access function buttons
Auto dimming
Programmable audible warning alarm
Advanced short circuit protection
Suitable for panel, gauge pod or pillar mounting
Easy to read, 7-segment display with bar graph
Housing and accessories made out of tough, billet aluminium
Optional Accessories
Single or double LED ring. Available in bezel-matching colours
Shift/warning lights complete with a plug-in wiring loom, available in four colours (Red, Green, Amber, Blue)
Remote-mount shift light
Dash mounting kit. Tough and sturdy with tilt and directional adjustment