will i be able to use an ewg with an accessport map? i have a catless turboback and uppipe right now. planning on picking up an accessport and then going with an ewg on the stock td04 for a while. will this work? will i have to get a tune right away, or would i be fine running the ewg without a tune for a month? thanks.

r!az

You will need a tune.

you will be ok. I have an sti with stock vf-39, perrin uppipe modded with tial 44mm ewg, turboback, and ap stage 2 base map. I am just running it at 17psi wastegate pressure without issues. Putting in the meth this week and getting tuned the one after

i know the hole deal with cobb pulling the injen map but i would like to get it any help would be great thks guys ps glad to hear tri state meeting up tonight id like to go maybe nxt time

:confused: wrong thread man...haha. thanks for the info norexyet.

will i be able to use an ewg with an accessport map? i have a catless turboback and uppipe right now. planning on picking up an accessport and then going with an ewg on the stock td04 for a while. will this work? will i have to get a tune right away, or would i be fine running the ewg without a tune for a month? thanks. r!az
Controlling an EWG with the AP and StreetTUNER is not a problem. I suggest you swap your stock EBCS for a ProDrive unit so the plumbing is a bit easier. Those units plug right in to your stock harness. The document in this thread (http://www.cobbforums.com/forums/showthread.php?t=31625) goes over the stock boost control details.

Take care,
Christian.

Controlling an EWG with the AP and StreetTUNER is not a problem. I suggest you swap your stock EBCS for a ProDrive unit so the plumbing is a bit easier. Those units plug right in to your stock harness. The document in this thread (http://www.cobbforums.com/forums/showthread.php?t=31625) goes over the stock boost control details.

Take care,
Christian.Yes, with StreetTUNER. But the OP makes no mention of doing anything other than running an OTS map. Is that still okay?

No, do not do that.

Yes, with StreetTUNER. But the OP makes no mention of doing anything other than running an OTS map. Is that still okay?
No, if you run ANY hardware on the vehicle other than what the calibration was originally developed for then you will need to re-tune the vehicle.

Take care,
Christian.

Which is what I posted as the first reply to this thread. Thank you, Christian. I haven't been here long, but I've been here long enough to see norexyet post some blatantly wrong stuff.