i have an 02 wrx and i think my cam seals are leaking does anyone have any insite on how they are replased?

Well first... how do you know it is your cam seals? If you need them replaced then.....well replace them. It is a common thing for cam seals to go out. In the mean time keep oil in the car. Always check your levels and you should be fine driving it around until you get the problem fixed.

well i took off my headers and followed the oil with a light and found it looks like it is comeing from the cam seals. i was hopeing that maybe someone could either direct me to a link that could walk me trought it or kinda tell me how.

Remove timing covers, pin timing belt tensioner, remove belt, remove cams, pull/replace seals, reverse the process :).


Brian
http://www.northursalia.com/hosting/home.jpg (http://www.ravensblade.com) http://www.northursalia.com/hosting/impreza.jpg (http://www.northursalia.com) http://www.northursalia.com/hosting/imprezamods.jpg (http://www.imprezamods.com) http://www.northursalia.com/hosting/dmw.jpg (http://www.deniedmywarranty.org) http://www.northursalia.com/hosting/bratthumb.jpg (http://brat.northursalia.com)

can you send me a link that might be able to walk me throught it please

Find a walk through for replacing the timing belt. But loosen the cam gear bolts after you take the timing belt cover off. Once the belt is off you can take the cam gears off and then use a seal puller (bent flat head screw driver) to pull the seal. Then use the old seal to push the new seal in.

-Chav

North Ursalia has a nice link that you should find helpful:
http://www.northursalia.com/modifications/drivetrain/tbeltwrx/tbeltwrx.html

-Charles-