hey all,

my fans are not getting power, i did some quick checks on relays and what not and nothing. i gotta rallyx this weekend and im workin pretty much str8 till then, so im just going to hard wire em, for now.

3 wires per side per fan i see, are 2 directly 12v and the black ground?
and what amp fuse would you recommend



thanks for all help

mike

I wired up a single 16" electric fan and a 30 amp fuse is what it needed... probly a 20 or 30 amp for each would be fine.. 30 might be a little too big for a small fan, but it should be fine for a quick and dirty fix until after the rallyx