Hand-made shift knobs from Chris (WRXdriftR) @ WC LATHE WERKS

Every knob is made on a hand-crank machining lathe with no computerized controls. This mean each piece is unique, made one at a time, and has a bit of character that mass-produced pieces cannot offer. Each knob is internally threaded with an M12x1.25 tap and will screw right onto the shift lever.

Chris can also provide custom pieces either from a design of your own OR by making small changes to the existing product lineup.
You can PM him here: http://forums.nasioc.com/forums/private.php?do=newpm&u=65065
Or email him here: lathewerks [at] turninconcepts.com

Link to the entire lineup:
http://turninconcepts10.chainreactionweb.com/index.php?cPath=1_178_179&osCsid=9344490b42de2fafb76aca31034af1d2

*Note about the black plastic material called Acetal Copolymer: This is a very hard polymer plastic which is resistant to dents and scratches. It is similar to Delrin (acetal homopolymer). It has good heat characteristics and will not get too hot or cold in the weather like metal does.



Heres the lineup:

2004+ STi (6-speed Transmission)
All shift knobs for STi have a recess cut into the bottom to clear the reverse ring while sitting as low as the stock knob.

Copolymer STi Sphere:
-$69 Shipped (continental USA)
-1.9" Diameter
-1.8" Height
-75 grams
-M12x1.25 direct internal thread for screw-on installation
-Recess in bottom for 6-speed reverse ring

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?cPath=1_178_179&products_id=273&osCsid=9344490b42de2fafb76aca31034af1d2)

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20Sphere-e.JPG



Copolymer STi Sphere with Collar:
-$69 Shipped (continental USA)
-1.9" Diameter
-2.5" Height
-90 grams
-M12x1.25 direct internal thread for screw-on installation
-Recess in bottom for 6-speed reverse ring

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?products_id=365)

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20SphereCollar-a.JPG



Copolymer STi Sphere with Grooves:
-$75 Shipped (continental USA)
-1.9" Diameter
-1.8" Height
-72 grams
-5 Grooves spaced 0.3" apart
-M12x1.25 direct internal thread for screw-on installation
-Recess in bottom for 6-speed reverse ring

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?cPath=1_178_179&products_id=309&osCsid=9344490b42de2fafb76aca31034af1d2)

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20SphereGrooved-d.JPG



Aluminum STi Sphere:
-$89 Shipped (continental USA)
-1.9" Diameter
-1.8" Hieght
-Hand turned from 6061-T651 Aluminum
-125 grams
-Satin/brushed finish
-Threaded bore 1.6" deep
-Recess for 6MT lockout ring

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?cPath=1_178_179&products_id=241&osCsid=9344490b42de2fafb76aca31034af1d2)

http://web.njit.edu/~cdm4/ShiftKnobs/STi%20Sphere-d.JPG



Aluminum STi Piston:
-$55 shipped (continental USA)
-Hand turned from 6061-T651 Aluminum
-125 grams
-1.5" diameter tapering to 1.2"
-2.2" overall height
-Triple "grip" rings
-Brushed Aluminum finish
-Threaded bore 1.6" deep
-Recess for 6MT lockout ring

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?cPath=1_178_179&products_id=218&osCsid=9344490b42de2fafb76aca31034af1d2)

http://web.njit.edu/~cdm4/ShiftKnobs/STi%20Piston-c.JPG



WRX Shift Knob Lineup (5-speed)
Also fits other Subaru 5-speeds that do not have reverse ring


Copolymer WRX Sphere with Collar:
-Price: $69 shipped (continental USA)
-1.9" Diameter sphere
-0.7" tall collar plus 0.4" tall boot lip
-Boot lip for stock shift boot, gives proper appearance
-110 grams
-M12x1.25 direct internal thread for screw-on installation
-2.5" deep hole so knob only protrudes 0.4" above shift lever

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?cPath=1_178_179&products_id=274&osCsid=9344490b42de2fafb76aca31034af1d2)

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollar-d.JPG




Copolymer WRX Tapered Piston:
-$55 shipped (continental USA)
-1.5" Diameter tapering to 1.0" at bottom
-1.5" tall top cylinder, 0.5" tall taper, 0.5" tall bottom
-2.5" tall overall plus 0.4" tall boot lip for proper appearance
-100 grams
-M12x1.25 direct internal thread for screw-on installation
-2.5" deep hole so knob only protrudes 0.4" above shift lever

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?cPath=1_178_179&products_id=275&osCsid=9344490b42de2fafb76aca31034af1d2)

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20TaperedPiston-c.JPG



Aluminum WRX Tapered Piston:
-$55 shipped (continental USA)
-Hand turned from 6061-T651 Aluminum
-220 grams
-2.9" high overall height
-1.5" diameter tapering to 1.0"
-2.5" internal threads
-Machined groove to hold shift boot

Direct Link to Product (http://turninconcepts10.chainreactionweb.com/product_info.php?cPath=1_178_179&products_id=197&osCsid=9344490b42de2fafb76aca31034af1d2)

http://web.njit.edu/~cdm4/ShiftKnobs/WRX%20TaperedPiston-d.JPG

thanks for the new thread Clint! Looks great! (cept for the perverted title :lol: )

~Chris
WC LATHE WERKS

Hi Chris. I measured my current 4EAT knob and it is 5.25" tall, 3" deep hole, and 1.75" diameter. I like the way it sits so I was wondering if it would it be possible to make an aluminum tapered piston to these specs? Or would it look awkwardly disproportionate??? I just don't want it to look too dinky since the auto doesn't have a shift boot. Let me know if this will work. Much appreciated! Kevin

chris, i just recieved my copolymer tapered piston knob.outstanding machine work.by far my favorite mod on my car.

Hi Chris. I measured my current 4EAT knob and it is 5.25" tall, 3" deep hole, and 1.75" diameter. I like the way it sits so I was wondering if it would it be possible to make an aluminum tapered piston to these specs? Or would it look awkwardly disproportionate??? I just don't want it to look too dinky since the auto doesn't have a shift boot. Let me know if this will work. Much appreciated! Kevin


Yes I can make something like this. Although I believe your diameter of 1.75" would be a bit large for a cylindrical style since my standard Tapered Piston (shown above in the original post) is 1.5" diameter and fits my hand (and others) just right. Im 6'2", so I dont have small hands either.
I could make a 3" or 4" tall tapered piston in aluminum and just wont include the boot lip at the bottom, but instead make the bottom cylindrical section slightly longer instead. I would probably make the top cylinder a bit taller to make the knob 3, 4, 5 inches tall, whichever you desire.
How does that sound?



chris, i just recieved my copolymer tapered piston knob.outstanding machine work.by far my favorite mod on my car.

Glad you got it ok, first time shipping to Hawaii :)



~Chris M
WC LATHE WERKS

Yes I can make something like this. Although I believe your diameter of 1.75" would be a bit large for a cylindrical style since my standard Tapered Piston (shown above in the original post) is 1.5" diameter and fits my hand (and others) just right. Im 6'2", so I dont have small hands either.
I could make a 3" or 4" tall tapered piston in aluminum and just wont include the boot lip at the bottom, but instead make the bottom cylindrical section slightly longer instead. I would probably make the top cylinder a bit taller to make the knob 3, 4, 5 inches tall, whichever you desire.
How does that sound?

~Chris M
WC LATHE WERKS

That sounds good. I trust your judgment since you're the pro! I guess a total height of 5" would be good. Should I purchase the aluminum wrx knob on the website and add a note? Thanks. Kevin

That sounds good. I trust your judgment since you're the pro! I guess a total height of 5" would be good. Should I purchase the aluminum wrx knob on the website and add a note? Thanks. Kevin

This is a custom order. PM sent for info on ordering it.
~Chris
WC LATHE WERKS

That sounds good. I trust your judgment since you're the pro! I guess a total height of 5" would be good. Should I purchase the aluminum wrx knob on the website and add a note? Thanks. Kevin


Heres a design for what you are looking for. The tap is only 3" long so I cant thread the knob deeper than that unless I make some sort of narrow adaptor. I made the knob 4" tall because 5 would have another two inches above the top of the lever. Let me know how you like it:

http://web.njit.edu/~cdm4/ShiftKnobs/WRX%20AutoTaperedPistonDRW,1.62inch.JPG


~Chris

^looks good! PMed you! Thanks.

anyway I can get you to make a wrx shift knob with the grooves like the sti knob?

If so - how much?

anyway I can get you to make a wrx shift knob with the grooves like the sti knob?

If so - how much?

Yes, sure. Ive already made two versions of it (with deep and shallow grooves), they are just not on the normal lineup from TiC yet.

deep:
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollarGrooved-a.JPG
http://farm1.static.flickr.com/149/410316286_7a44b6898a_o.jpg

and shallow:
http://i163.photobucket.com/albums/t292/rickitytick/DSC01917a.jpg
http://i163.photobucket.com/albums/t292/rickitytick/DSC01918b.jpg


Which are you interested in?

~Chris
WC LATHE WERKS

bump for a new week

and shallow:
http://i163.photobucket.com/albums/t292/rickitytick/DSC01917a.jpg
http://i163.photobucket.com/albums/t292/rickitytick/DSC01918b.jpg
~Chris
WC LATHE WERKS

That looks amazingly cool.

How is the feel of that knob compared to a standard sphere shaped one?

Could you make that with a 2" diameter? If so send me a price shipped to 98042.

My hands = largest evah!

That looks amazingly cool.

How is the feel of that knob compared to a standard sphere shaped one?

Could you make that with a 2" diameter? If so send me a price shipped to 98042.

My hands = largest evah!

The grooves are shallow so they are noticeable, but do not make the knob feel very sectioned like the larger deep grooved version. These shallow grooves provide extra grip and you dont have to worry about them collecting grime, just wipe the knob with some acetone on a rag if you dont like washing your hands :lol: Otherwise it is a very good design. Send a PM to Whiskeytech on Nasioc, he bought the one pictured above.

~Chris M
WC LATHE WERKS

Chris, Thanks for the quick shipping. For anyone on the fence about getting this knob the feel is great. I got the copolymer sphere with groves. Fit and finish are great! Two thumbs up to both Chris (WC Lathe Werks) and Clint at Turn In Concepts working together for great service.

Chris, Thanks for the quick shipping. For anyone on the fence about getting this knob the feel is great. I got the copolymer sphere with groves. Fit and finish are great! Two thumbs up to both Chris (WC Lathe Werks) and Clint at Turn In Concepts working together for great service.

Thanks for the kind words!
~Chris
WC LATHE WERKS

bumpo

up for a new week.

My brother (4sevens) hooked me up with one of Chris' knobs, custom made (aren't they all?) for my 2003 Honda Accord (which has a TSX 6 speed tranny btw :p).

Got it in the mail last night and just wanted to share with everyone Chris' stunning handiwork.

He also custom made a boot ring thingymabobber according to spec. 'Turned' out quite nice.

http://chows.smugmug.com/photos/147192781-L.jpg
http://Chows.smugmug.com/photos/147192827-L.jpg

Great job Chris! With all the CNC machines out there nowadays, talented machinists are far and few between. I consider myself lucky to own one of these works of art.

Lookin good! Glad you like it.. good transmission upgrade you've got there :D

~Chris

start up another new week.

~Chris

bump

~Chris

bumper again

bump for new inventory

You guys are aware of custom order availability?
Here are some one-off pieces Ive made earlier for examples:

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/Custom-WhiteWRXSphereFlared-c.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/Custom-WhiteWRXSphereShort.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20ConicalWhite-b.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20GF4-d.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20TallPiston-a.JPG


and an Automatic knob:
http://web.njit.edu/~cdm4/ShiftKnobs/AutoPiston-c.JPG


Similar customizations can be done to knobs that will specifically fit the STi reverse mechanism.

~Chris M
WC LATHE WERKS

Haha, good Ol' Pro Engineer

Free bump for an awesome guy with awesome products

thanks man!

~Chris

bump.
~Chris

up again for another week

Amazing craftsmanship, thanks Chris!

gotta say i love my colypolymer knob!! even better when i get to shine my knob :) :lol:

Just wanted to post a few pictures of my new knob. It is the polished aluminum piston.

I believe it's Chris' first 4EAT knob and it came out amazing ... I absolutely love it. If any other 4EAT guys out there are thinking of a new knob, I would definitely recommend one from Chris! Sorry it took so long to post these! Been busy lately!

http://farm1.static.flickr.com/211/500033681_c8be645d52_b.jpg
http://farm1.static.flickr.com/211/500033681_c8be645d52_b.jpg

http://farm1.static.flickr.com/204/500033575_6c03d458b1_b.jpg
http://farm1.static.flickr.com/204/500033575_6c03d458b1_b.jpg

http://entimg.msn.com/i/BillMurray/Kingpin_300x298.jpg

I want a clear shift knob with a rose inside. That would be way hot!

Just wanted to post a few pictures of my new knob. It is the polished aluminum piston.

I believe it's Chris' first 4EAT knob and it came out amazing ... I absolutely love it. If any other 4EAT guys out there are thinking of a new knob, I would definitely recommend one from Chris! Sorry it took so long to post these! Been busy lately!

http://farm1.static.flickr.com/211/500033681_c8be645d52_b.jpg
http://farm1.static.flickr.com/211/500033681_c8be645d52_b.jpg



I'm about to run a few more of these Automatic 4EAT aluminum piston knobs. I want to have TiC sell them, so please PM me if you are interested and then I can begin a new product line.



http://entimg.msn.com/i/BillMurray/Kingpin_300x298.jpg

I want a clear shift knob with a rose inside. That would be way hot!

I can cut one from glass for you... :lol: maybe not.

~Chris
WC LATHE WERKS

bump, got a bunch of new inventory. Ill work on the automatic knobs this week :)

bump up

I have a new knob for the subaru Automatic transmission available!
This knob fits any Subie Auto trans that does NOT have a button-activated lever. It screws right on and has a hole depth of 2.8". Overall height is 4" tall and material is 6061-T651 Aluminum. Weight is 250grams (+-5 grams).

Here are some pics:
http://web.njit.edu/~cdm4/ShiftKnobs/AutoPiston-c.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AutoPiston-d.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AutoPiston-a.JPG

(this will be on TiC's website tonight. 2 in inventory)

~Chris M
WC LATHE WERKS

bump!

I have another new product for the STi 6-speeds!
Its a copolymer piston style.
Height: 2.4"
Diameter: 1.5"
Weight: 75 grams
Screws right on like usual, has a cutout in the bottom for the reverse ring to work normally, and doesnt sit any higher than stock.
Copolymer doesn't get hot or cold in extreme weather either!

Price: $55 shipped (PM for details)

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20Piston-c.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20Piston-c.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20Piston-d.JPG

~Chris M
WC LATHE WERKS

Hey Chris, I like the white conical knob you made but I think I would want it in black for the WRX with the boot ring. Also can you carve out a spot on the top about the size of a quarter to put a shift pattern into? I have some stuff to make them. Just curious and if so PM me a price.
Thanks
Or if you have a different idea with the cutout. I just like that shape as I currently have a Gredy and I dont like the sharp edges it has.

Hey Chris, I like the white conical knob you made but I think I would want it in black for the WRX with the boot ring. Also can you carve out a spot on the top about the size of a quarter to put a shift pattern into? I have some stuff to make them. Just curious and if so PM me a price.
Thanks
Or if you have a different idea with the cutout. I just like that shape as I currently have a Gredy and I dont like the sharp edges it has.

Yes, I can make a black copolymer conical knob with the boot lip on the bottom. It will be simple to make a flat top on it for a decal too.

~Chris
WC LATHE WERKS

Yes, I can make a black copolymer conical knob with the boot lip on the bottom. It will be simple to make a flat top on it for a decal too.

~Chris
WC LATHE WERKS

Once I get all my materials I will let you now how deep to make the indentation on the top. I kind of wat it to be the same depth as the stuff I am using that way it still has a nice round top to it. Scrapbook stores have these things called page pebbles
http://www.gelstuff.com/pagepebbles.html

that are little round clear dome shaped things. I have designed a shift pattern and it will stick to the bottom of this and then I will use double sided tape to stick it to the knob.

Here is another custom order I made for "Bacon Ace". It has a flat top on it so he can have a shift pattern etched into it.

http://web.njit.edu/~cdm4/ShiftKnobs/WRX%20SphereCollaredFlattop-a.JPG

http://web.njit.edu/~cdm4/ShiftKnobs/WRX%20SphereCollaredFlattop-a.JPG

~Chris
WC LATHE WERKS

bump!

Just wanted to post and say how amazing Chris's work is. I had this knob made custom for my car, and couldn't be happier with the end results. Chris always stays in touch and delivers exactly what his customers want. Bump for Chris @ Lathe Werks.

http://i17.photobucket.com/albums/b90/eg6civic/lathewerks004.jpg

I like this one:

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20GF4-d.JPG

What color options are there?

I like this one:

http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20GF4-d.JPG

What color options are there?

That knob is made from Copolymer, so your color choices are Black, White or Brown. I don't have brown in inventory right now because I dont think anyone would want that color :p

This is the GF4 style knob, designed by one of my earlier customers.

~Chris
WC LATHE WERKS

bump for interest

I have a new shift knob design now!
I call it the "Aluminum STi Capsule" shift knob

http://web.njit.edu/~cdm4/ShiftKnobs/STi%20Capsule-a.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/STi%20Capsule-b.JPG

Aluminum 6061-T651 with brushed satin finish
Height: 2.4"
Major Diameter" 1.625"
Weight: 160 grams
Double rounds on top and bottom
Flat Top
Recess in the bottom for STi 6speed reverse mechanism
Pricing: special (not yet on website) PM if interested!

~Chris
WC LATHE WERKS

Here is a feedback response I just received from one of my shift knob owners:

His NASIOC name is Big-E

" Big-E 06-19-2007, 02:40 PM
Ok, here's my feedback:

*Super easy to install
*Installed and let bake in sun for about an hour - the copolymer knob does not heat-up as stated on TiC's website
*Excellent finish - no chips, scratches, marks, etc and has a nice feel to it - solid w/o being "hard"
*Took about 15 minutes or so to get used to
*No audibile feedback through knob vis-a-vis the TiC/Kartboy shifter combo kit
*Very little tactile feedback - meaning no severe or other wild vibrations - you get just enough feedback to "feel" the gears
*I think that the price is right
*My father, who is not a car guy, likes the new addition
*If you're into cars, and you know who you are, you should definitely consider getting yourself this Copolymer WRX "piston" shifter knob
****If I could buy another subie or two, I would buy another one or two of these knobs****"


and he purchased one of my Copolymer WRX Tapered Piston knobs:
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20TaperedPiston-c.JPG

~Chris
WC LATHE WERKS

bump for new inventory and website updates!

~Chris

chris sells the best knob in da world !! :lol:

http://i5.photobucket.com/albums/y199/piker28/IMG_0446.jpg

http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/Custom-WhiteWRXSphereShort.JPG
http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20ConicalWhite-b.JPG


Price for these?

Price for these?

$69 shipped for each. Custom order pieces. I have white and black copolymer available for those

~Chris

I have two new products to offer.

They have a brass insert inside which adds weight to the copolymer knobs.

Subaru STi 6speed Copolymer Sphere with brass:
Adds 25 grams for a total of 105g!
(shown in black or white)
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20SphereBrass-a.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20SphereWhiteBrass-a.JPG
(brass part is covered when installed on the car. It will look like this installed:
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20Sphere-e.JPG



Subaru WRX 5speed Copolymer Sphere with brass:
Adds 60 grams for a total of 160g!
(shown in black, available in white also)
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollarBrass-a.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollarBrass-b.JPG

(brass is covered by shift boot when installed)
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollar-d.JPG

These are special-order products, pricing is not set yet. PM me for details, it will be offered through TiC shortly!

~Chris M
WC LATHE WERKS

anybody has a installed picture of Copolymer sphere one for 06 wrx?

Just wanted to post and say how amazing Chris's work is. I had this knob made custom for my car, and couldn't be happier with the end results. Chris always stays in touch and delivers exactly what his customers want. Bump for Chris @ Lathe Werks.

http://i17.photobucket.com/albums/b90/eg6civic/lathewerks004.jpg

wow.
i want that.
like now. :lol:
will this fit my 07 2.5i?

anybody has a installed picture of Copolymer sphere one for 06 wrx?

It will look the same, I just have the STi shift trim on my WRX console. The boot will look better also, my shift boot is kinda bunched up under the knob for some reason

wow.
i want that.
like now. :lol:
will this fit my 07 2.5i?

Yes, it will fit your 2.5i, but you have to tell me if you have auto or manual (different threads). I can have it shipped out by tomorrow if you order tonight!

~Chris
WC LATHE WERKS

I have two new products to offer.

They have a brass insert inside which adds weight to the copolymer knobs.

Subaru STi 6speed Copolymer Sphere with brass:
Adds 25 grams for a total of 105g!
(shown in black or white)
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20SphereBrass-a.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20SphereWhiteBrass-a.JPG
(brass part is covered when installed on the car. It will look like this installed:
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20Sphere-e.JPG



Subaru WRX 5speed Copolymer Sphere with brass:
Adds 60 grams for a total of 160g!
(shown in black, available in white also)
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollarBrass-a.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollarBrass-b.JPG

(brass is covered by shift boot when installed)
http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollar-d.JPG

These are special-order products, pricing is not set yet. PM me for details, it will be offered through TiC shortly!

~Chris M
WC LATHE WERKS

Hey, that knob looks familiar!

Haven't been by my condo since Thursday. It should've shown up yesterday. Can't wait!

$69 shipped for each. Custom order pieces. I have white and black copolymer available for those

~Chris



can you make one in white that is a copy of the sti "titanium" knob?
you know, the optional knob for the 6-speed.
https://www.subarugenuineparts.com/product_info.php?cPath=33_68&products_id=628

can it be done exactly like it?

can you make one in white that is a copy of the sti "titanium" knob?
you know, the optional knob for the 6-speed.
https://www.subarugenuineparts.com/product_info.php?cPath=33_68&products_id=628

can it be done exactly like it?

I have a design similar to that one with a collar below it shown here:
http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20SphereCollar-a.JPG


I can modify this design with a shorter collar and a groove in it to look like the STi knob for you. I can also do it in White copolymer.
PM me if you are interested!

~Chris
WC LATHE WERKS

bump!

bump up for 4th of July!

can you make one like this with the brass insert so it will screw on?:

http://i14.photobucket.com/albums/a329/Ti_22/4c4a_1_b.jpg

^Yes, sure can. Sent you a PM about that.

~Chris
WC LATHE WERKS

Bump!!

bumper

Is there any chance you'll ever design/make e-brake handles? I really like the shift knob with deep grooves for 5MT WRX (the shallow groove pics aren't showing up so I don't know what they look like), but would also like a matching ebrake handle.

Could that be in the works? I have an 01 2.5RS. Thanks!

anybody has a installed picture of Copolymer sphere one for 06 wrx?


http://s150941738.onlinehome.us/hso/IMG_3458_L4_400.jpg
copolymer sphere w/ collar (w/ brass insert) in 06 wrx

love it!

Looks awesome! Good job with the picture, came out better than most of mine

~Chris

bump!

I have a new shift knob design now!
I call it the "Aluminum STi Capsule" shift knob

http://web.njit.edu/~cdm4/ShiftKnobs/STi%20Capsule-a.JPG
http://web.njit.edu/~cdm4/ShiftKnobs/STi%20Capsule-b.JPG



Chris, I might've just found another new shiftknob for my car lol. This'll be the 3rd now?! Lol, let me know if you can make this in the black material you used for my second knob. Also pricing in the black and also the aluminum material. I might also have to get kinda crative with this one. Let me know what options are available for customizing.

Phil

Chris's work is incredible. There's nothing like knowing you have a handmade piece made by a true craftsman.

http://www.hooptywagon.com/img/carshoots/sti_parkinglot/IMG_0813.JPG

Thanks again, dude!

Hey...have you made any shift knobs for the 4eat but with a ring at the base for a boot? I am replacing the center console with one from a manual so that there is a boot there to hide the 4eat. Here is what I am talking about:

http://forums.nasioc.com/forums/showthread.php?t=877164&highlight=4eat+short+shifter+mod

If I could avoid cutting the shaft it would be nice but I think the boot wont be big enough. Either way there is nothing for the boot to latch onto nor a knob that can screw onto the shaft without some modification. I would like something like the knob with the grooves but the piston could be easier to make fit. What do you think? PM me with your thoughts

how bought a Copolymer STi Sphere in Red! :D
and will they go onto my 05 2.5RS?

-Joe

Chris, I might've just found another new shiftknob for my car lol. This'll be the 3rd now?! Lol, let me know if you can make this in the black material you used for my second knob. Also pricing in the black and also the aluminum material. I might also have to get kinda crative with this one. Let me know what options are available for customizing.

Phil

Yes, I've made one of these in black copolymer already:
http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/STi%20Capsule-a.JPG

I can make one for you, no problem. Please send me a PM with the info you want regarding customization. Its hard to put a limit on what I can do if I don't know what you are looking for.


Hey...have you made any shift knobs for the 4eat but with a ring at the base for a boot? I am replacing the center console with one from a manual so that there is a boot there to hide the 4eat. Here is what I am talking about:

http://forums.nasioc.com/forums/showthread.php?t=877164&highlight=4eat+short+shifter+mod

If I could avoid cutting the shaft it would be nice but I think the boot wont be big enough. Either way there is nothing for the boot to latch onto nor a knob that can screw onto the shaft without some modification. I would like something like the knob with the grooves but the piston could be easier to make fit. What do you think? PM me with your thoughts

I can do something custom for your 4EAT, no problem.


how bought a Copolymer STi Sphere in Red! :D
and will they go onto my 05 2.5RS?

-Joe

Sorry, the copolymer material is only offered in white or black from my provider. You can try to paint it or dye it somehow, but I will not do this because it will probably mess up the material if it doesn't bond properly.

thanks sybir!

Nice work.

bump!

Bump for Chris and TiC! Got my knob today and it's awesome! No more shifting by grabbing the threads :)

chris sells the best knob in da world !! :lol:

http://i5.photobucket.com/albums/y199/piker28/IMG_0446.jpg

Just going through this thread for fun, then saw this and I am beyond interested in this piece. I'd like some more information on it and how much it would cost if you don't mind. The raised up look is amazing!!

Just going through this thread for fun, then saw this and I am beyond interested in this piece. I'd like some more information on it and how much it would cost if you don't mind. The raised up look is amazing!!

http://web.njit.edu/%7Ecdm4/ShiftKnobs/Extension2-c.JPG

That raised look is actually a two-piece design. The system is a simple double-screw setup where the aluminum rod screws right onto your shift lever, then the knob screws right onto the top of that.
Of course, you can use any subaru knob on this aluminum extension but it will probably not fit together flush and nice like the one shown. If you buy both the extension and the mating knob from me, I design them to fit together smoothly as shown.

Extension lever: $50
Black 2" Sphere knob: $65
TOTAL: $115 shipped (this is the discounted price when ordering both together)

You can also substitute another knob style for this one if you like. You can do an aluminum knob as well. The extension can be made with a lip on the bottom for the shift boot to snap onto also.
Got an idea? JUST ASK! :)

heyyyy thats my knob... bling bling

i have never been so happy since i got it and ditched my others i can cruise / commute / and drive aggressive and its all comfortable no more pain in the wrist ha

Pm'ed about Copolymer WRX Tapered Piston knob

Pm'ed about Copolymer WRX Tapered Piston knob

I never received your PM. Can you try it again? What would you like to know?
Its $55.00 shipped and I have 1 in stock ready to go :D

http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20TallPiston-a.JPG
~Chris M
WC LATHE WERKS

how far down does this sit on the shifter?
I want something like this. Not in co polymer though, I would like some wieght to it.

Bump! ^^

Bump! ^^

It can sit anywhere between 2.8" down (the total length of the tap for threading) or only an inch down depending on how far you want the hole drilled. I'd opt for a deeper hole because a shallow one means you put a torque moment on the knob when you push on the top end and only the bottom end is anchored with threads.

For weight, I can make it from aluminum, or put a brass thread insert into the copolymer so it will still be comfortable in hot/cold weather

STi owners, check out IWSTI.com in the vendor group buy section ;)

bump!

bump.

up again

can you engrave the "STi" logo on top of the knobs? Also what is the pricing for the custom knobs? I feel dirty typing all this btw, hahah.

can you engrave the "STi" logo on top of the knobs? Also what is the pricing for the custom knobs? I feel dirty typing all this btw, hahah.

I cannot do engravings, plus theres no certainty that the engraving will face the right direction when you screw it on the car. It might be upside down!

Pricing varies based on the type of knob and the options you want. PM me with your interests please!

do you make custom shift knobs for automatics? i like the look of the capsule one mentioned earlier. do you only make these out of aluminum and black polymer? i was wondering if one could be made in a similar color to the dark grey of the dashboard. also, is it possible to put a slight indentation/recess on the top of the knob, so say something like a tire valve cap could be placed on top and have it flush?

i was thinking it'd be really cool to have a sleek shifter like this with an indent on top to place a tire valve cap that has a subaru logo on it or something.

edit: nvm i saw earlier in this thread you do make automatic shift knobs. would one for an automatic be possible that looks like the cylinder connected to an upside down cone, like was posted earlier?

do you make custom shift knobs for automatics? i like the look of the capsule one mentioned earlier. do you only make these out of aluminum and black polymer? i was wondering if one could be made in a similar color to the dark grey of the dashboard. also, is it possible to put a slight indentation/recess on the top of the knob, so say something like a tire valve cap could be placed on top and have it flush?

i was thinking it'd be really cool to have a sleek shifter like this with an indent on top to place a tire valve cap that has a subaru logo on it or something.

edit: nvm i saw earlier in this thread you do make automatic shift knobs. would one for an automatic be possible that looks like the cylinder connected to an upside down cone, like was posted earlier?

A lot of designs are possible. Can you sketch something in paint or a drawing program if you have one and email a sketch to me to help me better understand exactly what you want? With machining, I need something solid to go upon or it might not come out the way you want.
My email: cmattessich@optonline.net

Thanks!
~Chris

Hi there,

I'd like one of the black copolymer STi spheres with a brass insert.
Would you be able to ship to the UK..? :eek:

Thanks,
Nige.

Hi there,

I'd like one of the black copolymer STi spheres with a brass insert.
Would you be able to ship to the UK..? :eek:

Thanks,
Nige.

Sure, but it will cost you more than normal to cover shipping. I do US Postal Service Global Priority w/ Insurance for international orders.

Moving to PMs...
~Chris

bump for chris!
now its just down to me deciding which knob to grap on :lol:
so many choices and they all look great!

i just received my Copolymer WRX Sphere w/ brass insert and it feels great.

bump for a great product and seller. thanks chris.

i just received my Copolymer WRX Sphere w/ brass insert and it feels great.

bump for a great product and seller. thanks chris.

Youre welcome Jon!

Chris, YGPM :)

got your PM, ill have your order ready in today if I have time.

Hey Chris, I just got the new Subiesport and saw your article in the Subaru News section on p. 19. I'm a little late to the game, but I'm glad that I've found someone that can make affordable custom shift knobs. I have an idea or 2 in mind. I'll try to draw them up in CAD and get them over to you when I get a chance. Your products look great and good luck with the business.

On a side note, how do you attach the brass insert to the knob? Loctite?

Hey Chris, I just got the new Subiesport and saw your article in the Subaru News section on p. 19. I'm a little late to the game, but I'm glad that I've found someone that can make affordable custom shift knobs. I have an idea or 2 in mind. I'll try to draw them up in CAD and get them over to you when I get a chance. Your products look great and good luck with the business.

On a side note, how do you attach the brass insert to the knob? Loctite?

When you do the CAD drawings, can you JPEG them and send them? Its a lot simpler for me to open than a ProE or AutoCAD drawing.

I use a special method for the brass, its an interference screw assembly that will pretty much never come apart, even if you want it to. :)

Sorry for the hijack. Archiving so I can order later.

Mine came in the mail yesterday. Very smooth, and cheaper than most other shift knobs out there, even though it was custom made to the specs i wanted. Kinda makes me wish I didn't have an auto.


http://i23.photobucket.com/albums/b367/lambtor/DSC00444.jpg

http://i23.photobucket.com/albums/b367/lambtor/DSC00445.jpg

Hey Chris, sorry I never got back to you, got caught up in stuff and forgot about this. I'm still mulling over getting a 3rd shift knob lol, but there is something else I wanna talk to you about making, I have an actual example to send to you. Just wanna see if it's possible to make, can you PM me your address so I can ship it to you?

Mine came in the mail yesterday. Very smooth, and cheaper than most other shift knobs out there, even though it was custom made to the specs i wanted. Kinda makes me wish I didn't have an auto.


http://i23.photobucket.com/albums/b367/lambtor/DSC00444.jpg

http://i23.photobucket.com/albums/b367/lambtor/DSC00445.jpg

Looks good! too bad my tap isnt any longer, otherwise I would drill deeper to thread it so it would not sit that high...


Hey Chris, sorry I never got back to you, got caught up in stuff and forgot about this. I'm still mulling over getting a 3rd shift knob lol, but there is something else I wanna talk to you about making, I have an actual example to send to you. Just wanna see if it's possible to make, can you PM me your address so I can ship it to you?

Ok, ill PM you

Just got mine today! Awesome craftsmanship!! I'll post pics of it installed soon! Thanks Chris! :D

Chris,
I am trying to leave you itrader feedback using this thread, but it keeps telling me "the deal URL is invalid". Not sure why this is happening. I'll contact the mods.

http://i7.photobucket.com/albums/y263/bugpower72/Nov052007.jpg

^looks AWESOME!!

Did you paint the extension black? It doesnt look like the silver aluminum.. maybe its the shadows in the dark though..

I wrapped a piece of black vinyl decal material around it. I'll probably paint it later on, although the vinyl looks just fine.
http://i7.photobucket.com/albums/y263/bugpower72/WCLatheWerksShiftKnobExtension3.jpg

bump up!

bump for thanksgiving weekend!

Hey, have you done anything for 07 Civic Si's? I'd like to get something that is close to the same shape and size as OEM but copolymer.

Hey, have you done anything for 07 Civic Si's? I'd like to get something that is close to the same shape and size as OEM but copolymer.

I've made parts for an Accord and S2000 before, no civics yet, but its the same thread. What does the knob look like?

Couldn't find a good pic, but here are a few, I think its the same as the TSX/s2000.


http://cgi.ebay.com/ebaymotors/Honda-Civic-SI-ONLY-4K-MILES-SUNROOF-SPOILER-6SPEED-1-OWNER-NON-SMOKER_W0QQitemZ300174361099QQihZ020QQcategoryZ625 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://www.edmunds.com/insideline/do/MediaNav/articleId=107050/firstNav=Gallery/photoId=20760

http://www.edmunds.com/insideline/do/MediaNav/articleId=107050/firstNav=Gallery/photoId=20763

i'm interested in a 5spd copolymer w/ brass knob in black.

take paypal?

Couldn't find a good pic, but here are a few, I think its the same as the TSX/s2000.


http://cgi.ebay.com/ebaymotors/Honda-Civic-SI-ONLY-4K-MILES-SUNROOF-SPOILER-6SPEED-1-OWNER-NON-SMOKER_W0QQitemZ300174361099QQihZ020QQcategoryZ625 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem (http://rover.ebay.com/rover/1/711-1751-2978-71/1?AID=5463217&PID=2701659&loc=http%3A%2F%2Fcgi.ebay.com%2Febaymotors%2FHonda-Civic-SI-ONLY-4K-MILES-SUNROOF-SPOILER-6SPEED-1-OWNER-NON-SMOKER_W0QQitemZ300174361099QQihZ020QQcategoryZ625 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)

http://www.edmunds.com/insideline/do/MediaNav/articleId=107050/firstNav=Gallery/photoId=20760

http://www.edmunds.com/insideline/do/MediaNav/articleId=107050/firstNav=Gallery/photoId=20763

Well I cannot put the leather around the side, but I can make something similar in Copolymer for you. Take a look at this design called the "GF4" style knob:
http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20GF4-d.JPG

i'm interested in a 5spd copolymer w/ brass knob in black.

take paypal?

Got you covered.

My new shift knob came in today and let's just say...IT'S AMAZING. Thanks Chris!!!

http://i54.photobucket.com/albums/g117/srbourque/DSC00639.jpg

^thats the one with a brass insert in the bottom to add about 60grams of weight.

i cant wait

Well I cannot put the leather around the side, but I can make something similar in Copolymer for you. Take a look at this design called the "GF4" style knob:
http://web.njit.edu/%7Ecdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20GF4-d.JPG


That looks pretty good, what are the dimensions for that one?
Oh, and whats the weight like? I'd like something on the heavier side.

Subscribing...

That looks pretty good, what are the dimensions for that one?
Oh, and whats the weight like? I'd like something on the heavier side.


Dimenions:
Height: 3" including boot lip
Top diameter: 1.5"
Taper height: 1.5"
Rounded top
Weight in only copolymer: ~80g
Weight with brass insert: ~140g

Both styles are for the Subaru 5speeds

Ever hit any of your knobs with a light sandblast for grip?

Got the knob two days ago; it looks great!

unfortunately its a different thread than the aftermarket shifter in the car (who knew?)

so i'll post pics after its installed on a kartboy ss.

Ever hit any of your knobs with a light sandblast for grip?

Sandblasting/beadblasting would actually smooth the surface finish. That technique is used for smoothing and refinishing rough surfaces.
I sand down the aluminum knobs smooth then give them a brushed look with emery cloth. The copolymer knobs appear just as they are cut from the lathe tool, no post-finishing is needed.

I add some grooves around the knob as an option to increase grip, but roughing the surface will only make it look bad and feel strange.

pm'd, will the white get dis colored?

pm'd, will the white get dis colored?

Well I know it will keep its color under normal operating conditions, but if your hands get dirty alot it might pick up the grime. Acetone can be wiped on it to clean it off well.

pm ed you

So these dont get cold?

So these dont get cold?

the copolymer really doesnt get cold enough to hurt or be uncomfortable like metal does. I've used the shifter when it was 30*F outside and the car was out all day and I didnt need gloves or anything. I used to hurt when I had one of my aluminum knobs in the car... my copolymer one is MUCH better.

Plus it doesnt heat up in the summer like metals, so you dont have to put a cloth over it or whatever

metal: :sadbanana:
copolymer: :banana:

So these dont get cold?

It gets cold, but nothing even close to a metal knob. I can palm it when my cars been outside all night and its below zero without cringing. Likewise, in the summer, it stays the same temperature almost all the time, which is the reason why I got one for my Mom's civic si, she gets burned from the metal one that comes in that car.

If only they came in brushed aluminium.

... I do make shiftknobs in brushed aluminum, what do you mean?

Look on previous pages in this thread to see pics of my aluminum offerings. I probably have some pics on my database that are not in this thread, and as always, customization is possible to your specification.

bump for holiday gifts!

Plastic that looked like brushed aluminum. Good looks but not hot/cold.

Congratulations on your efforts man. These look great. I'm glad you're able to capitalize on your talents. Good luck with your business!

Just PM'd you about a custom knob!

STi Buyers, there is a new product coming out soon... IWSTi.com has something in the Vendor Announcements about it

holiday bump!

how much for this in white?

http://web.njit.edu/~cdm4/ShiftKnobs/AcetalCopolymerKnobs/WRX%20SphereCollarBrass-a.JPG

^^^ thats the special-order Copolymer WRX Collar Sphere w/ Brass Insert
Price is $89.00 shipped for black or white.

I received my spherical knob today. What an absolutely beautiful piece. First class workmanship, excellent communication and fast shipping!

Thanks Chris!

Hey guys, I now offer BLACK ANODIZED ALUMINUM shiftknobs for the WRX and STi. They are available in the sphere style right now only. Ill include a pic of the regular finish brushed aluminum knobs too

Brushed aluminum STi Sphere
http://web.njit.edu/~cdm4/ShiftKnobs/STi%20Sphere-d.JPG

Black Anodized STI Sphere
http://web.njit.edu/~cdm4/ShiftKnobs/STi%20SphereAnodized-b.JPG

Brushed aluminum WRX Sphere
http://web.njit.edu/~cdm4/ShiftKnobs/WRX%20SphereCollared-c.JPG

Black Anodized WRX Sphere
http://web.njit.edu/~cdm4/ShiftKnobs/WRX%20SphereCollared%20Anodized-b.jpg



These knobs are not yet on TiC's webpage, they are also on a special sale right now on IWSTI.com as a group buy with low pricing!

Just wanted to post and say how amazing Chris's work is. I had this knob made custom for my car, and couldn't be happier with the end results. Chris always stays in touch and delivers exactly what his customers want. Bump for Chris @ Lathe Werks.

http://i17.photobucket.com/albums/b90/eg6civic/lathewerks004.jpg

wow.
i want that.
like now. :lol:
will this fit my 07 2.5i?

im still interested in this chris, but i have some questions about it. ill be sending you a pm shortly :)

Hey Chris, is it possible to do a metal sphere for the 4EAT just enough to cover the threads?

got ya covered Gweedo

Just wanted to post and say how amazing Chris's work is. I had this knob made custom for my car, and couldn't be happier with the end results. Chris always stays in touch and delivers exactly what his customers want. Bump for Chris @ Lathe Werks.

http://i17.photobucket.com/albums/b90/eg6civic/lathewerks004.jpg

Would this fit a 99' 2.5RS (5spd) or could one be made?
And how much would it cost with the brass fitting inside?

DC

Would this fit a 99' 2.5RS (5spd) or could one be made?
And how much would it cost with the brass fitting inside?

DC

Yes I fits ANY subaru 5speed manual

I would like a Round Copolymer for an 06 WRX. I checked TiC and they were listed as -3 in their inventory. I would like one before valentines day cause the girl wants one for her car! Anything you can do ?

I would like a Round Copolymer for an 06 WRX. I checked TiC and they were listed as -3 in their inventory. I would like one before valentines day cause the girl wants one for her car! Anything you can do ?

yes!
check your pm

Have you ever thought about making shift knobs with wood?

Have you ever thought about making shift knobs with wood?

That would actually be really cool. You could get into the classic car market! I would love a nice burlwood knob for my upcoming VW beetle project!

I never tried using wood. I just dont think the market demand would be great enough to justify the time invested into getting it right. Plus I have a metal lathe, which I think can be used for wood, but there are some missing features.

bump.

I think Im going to get a vendor membership soon! :D

my vendor acct will be activated around april 1. finally!

Got the knob Chris. Love it. Great product and Excellent service. Thanks.

http://i192.photobucket.com/albums/z130/casionerd/DSC01765.jpg

Congrats Chris on the Vendor status!

Here's a blast from the past to really show what your capable of, the original GF4 shift knob (and quite possibly still the only one like it in existence?)

http://i127.photobucket.com/albums/p122/g_f_3/DSC_6579.jpg

http://i127.photobucket.com/albums/p122/g_f_3/DSC_6575.jpg

http://i127.photobucket.com/albums/p122/g_f_3/DSC_6573.jpg

Anyone who buys one of these shift knobs is really going to love it, and get that warm fuzzy feeling inside that you are helping support the subaru enthusiast community.

^I have sold several copolymer GF4 knobs like yours, but I believe there is only 1 other with the knurling on aluminum. It is a bit different than yours in precise dimensions but not too different. There are still named the GF4 style after you, but as a specialty order.

Ryan from SubieSport is actually getting one of them in copolymer from me, but with some customization.

Chris, let me know about the custom ones and pics!! Woot.

Hey guys,
I just got my account activated for vendor! YEAAA!

Im starting my own thread in this Interior Forum so I can better update everything.
Clint will still be selling knobs through TiC, but I'll be better able to directly answer questions and offer more specials and group buys now so keep an eye out.

Best way to get in touch with me: Private Message

CHECK OUT MY NEW THREAD! (itll be up in an hour or so)

Which knob that you offer is the heaviest?

I've got stainless steel knobs (for the STi only right now), but Ill have them offered for the WRX soon. Keep an eye out, Im going to post a group buy on these in the next few hours!

I'm impressed with the copo knob. Thanks Chris!

http://i189.photobucket.com/albums/z278/FlimFlamMan_WRX/Copo_Knob.jpg

These still available bump?

These still available bump?

Yes or you can hit up Chris directly via WC Lathe Werks

These still available bump?

I'm still making shift knobs :)
Turn In Concepts is still a distributor of my products, but I also distribute their products so either way you order its good :p