Hey all,
I am now offering my services to you. I am deleting TGV's for a fraction of the price most other places will do it for. I will remove both sets of butterflies, remove both rods, motors, sensors, remove the aluminum plate and port the housing out all for $75 plus whatever shipping is to get it back to you. If you want to know about my work, i have pictures below or you can ask devildevil on NASIOC. My work is as good, if not better than other places but as you can see, my prices are more efficient. I clean them after i am done with the housings as well. I can have these powder coated basically any color you would like for a small fee as well. I have a couple extra WRX TGV sets lying around if you do not have down time. I can either send them out for a core fee of $150 that is %100 refundable once i have received a set that are in working order, or i can send them out as soon as i receive yours.

I accept Paypal: JPizzzle@hotmail.com
Personal Checks but they will have to be processed before any work is done.
Cashiers checks or Money orders.

I would suggest if something is sent in the mail, simply wrap it up inside the housing or something safe. Make sure you package these very well. They are aluminum and can break fairly easily with some mail carriers.

PM me, Email me at XGrannysGarageX@yahoo.com, or simply just post a reply!

Thanks everyone,
Granny's Garage
Jon Palmer
Owner/Operator

http://img251.imageshack.us/img251/5269/dsc00039eh7.jpg
http://img105.imageshack.us/img105/6979/dsc00041tx6.jpg
http://img443.imageshack.us/img443/8735/dsc00040qf5.jpg
http://img49.imageshack.us/img49/3400/dsc00038kx2.jpg

Any Questions, Please ask!

I'm interested. Can you do one so it's doesn't cause a CEL?

Good amount of interest is a reason to be at the top!

I'm a newb at this, but won't a tvg delete throw a cel?

Once you do this modification, it would be a good idea to get a tune. You increase air flow which messes with you gas:air ratio. However, Cobb's accessports have been known to block the CEL. Other than that you can simply have your local tuner block that CEL if need be.

I can also remove the aluminum plate and butterflies but leave the bar in. This way all of your sensors and motors will be intact.

weekend bump

Thanks for the PM. I may just go with your standard delete service.

doesn't something need welding though?

Sounds sweet.....I'm bookmarking this link for later.......

can you post better pics?

What pictures would you like? Simply more clear or of something specific?

clear, yes please

interesting and interested.

John.

I will get better pictures ASAP. Sorry for the delay.

Interested in seeing the pictures as well.

I've sent a few PMs but have gotten no response back.

Im sorry, late day...PM's replied and ready to ship these!

hey i just need the inside ported i already have the butterflies deleted and the sides where never drilled or tapped. could you pm me price for just a p&p without everything else?

http://img527.imageshack.us/img527/1585/tgv3rn4.jpghttp://img510.imageshack.us/img510/6846/tgvhj2.jpghttp://img518.imageshack.us/img518/6891/tgv1rw1.jpg
Let me know if these aren't clear enough. I dont understand it, You would think a 5.1MP camera would take better pictures. If you want better pictures i can figure it out but this is what i have for now. Let me know if you are looking for something specific that i can get a picture of.

Are the stock holes from the shaft welded up? I'm hearing conflicting reports on how that needs to be welded to seal up properly.

Nice work, these are great!

I do not use a welder. I simply tap each end of the TGV housing and tighten an alan head screw with locktite on the threads. This works flawlessly and is much easier.

My TGV's came in last night from Jon @ Granny's Garage and they look great! I'm impressed with the price and with the speed of shipping! I'll take more detailed pictures soon with a nicer digital camera with a macro setting and post them up here.

Can't wait to do my 18G install this weekend!

My TGV's came in last night from Jon @ Granny's Garage and they look great! I'm impressed with the price and with the speed of shipping! I'll take more detailed pictures soon with a nicer digital camera with a macro setting and post them up here.

Can't wait to do my 18G install this weekend!

Def, post some pictures. Id like to see how good they come out.

Thanks again tubbytreats. Im glad somebody has a good camera to help me out! More TGV's are ready to ship!

Thanks again tubbytreats. Im glad somebody has a good camera to help me out! More TGV's are ready to ship!

Any TGV's for an STI ready to ship? if so let me know ill def use them.

http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1709.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1710.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1711.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1712.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1713.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1714.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1715.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1716.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1717.jpg
http://www.justintubbs.com/rphotos/TGV%20Deletes/IMG_1718.jpg

I will have them soon, hopefully within the next week. I will contact you wrxbeater11 as soon as i get them.

I will have them soon, hopefully within the next week. I will contact you wrxbeater11 as soon as i get them.

Awesome, ill be waiting to here from you!

pm sent!

I will be out of town until monday so everything will be replied to then.

Thanks again everyone!

Im back, PM's have been sent!

Jon,

Is this a limited time offer? I am planning on completing a chain of mods, including TGV deletes sometime in lat June or early July. Will you still be offering deletes for this price? Thanks.

Prices are here to stay! I see no reason to change them so let me know when you need this done!

i just got my tgv's back from jon as well and they look awesome! i don't have my digital cam for now, but believe me when i say he does great work! it looks just like the pics from the previous poster, tubbytreats. great guy, great communication as well! plus, his price is way cheaper than what the other guys are charging! you can't go wrong with this price....

Thanks again jabba827. More TGV's are available!

This does look awesome. Just out of curiosity of the members who did have this done. How is the cold starts? Any weird idling or problems? If things work out i might do this as well. Great Work Jon, keep it up.

Thanks Strider327. I have more available, just give me the word!

Soon to have STI TGV's.Will have updates as soon as i receive them.

Jon

hey jon, any wrx deletes in stock?

Jon,

I have a large install coming up, and will be removing my TGVs. Do I need to paypal you $150 to have a deleted WRX set sent out before I send in my stockers, or $225?

Also, is it possible to have you send me a set with the rods still installed? I don't want to deal with the CEL. Maybe you could grind down the exposed portions of the rods to be thinner before you reinstall them (maybe for a $10 bonus?)

Thanks,

Evan

All posts replied to!

Sti Tgvs Now Available!

Amazing price indeed.

Thank you thank you! STI and WRX TGV's available!

Is it a problem if we send you the tgv housings without sensors and motors? I plan to reuse these with the APS tgv plates. :cool:

So you would just be sending the aluminum casting? If so thats not a problem at all. Let me know!

Ok got the same question do you have any wrx deletes in stock and do I paypall you 150 and you pay pal me 75 back when you get the cores? Pm me please.
Nat

Revisions may need to be made but this looks good for now:

Here is the process that we would go through:
1) If you would like to do a core refund you send me the $75 for the services, $150 for the core charge, and $15 (This may change due to location of destination) is the flat rate charged for shipping to US residents in the lower 48. If you choose to use paypal, add 3% which ends up being a total of $247.20.
2) Once you receive the TGV's, you send me your TGV's and once i have received them in good condition, i will send you the $150 core charge back.
If you send a check of any sort, the TGV's will not be sent until it has cleared.

If you want to send me your TGV's, I request either paypal of $75 for the service, $15 (This may change due to location of destination) for the flat rate shipping to the lower 48 US states and 3% fee added one which turns out to be $92.70. Or a check is sent with the TGV's, i will wait until the check has cleared before any work is done.

pm sent

what is the difference between STi TGV's and WRX? I have a set of STi TGV's in my garage and I want to get the deleted and put them on my WRX. Will this work?

Sti and WRX TGV's are differnt and not interchangeable without modification. They also use different injector types.

So, let me ask a better question. I have some USDM stock STi TGV's , What would I need to do to use these on my USDM 05 WRX?

I believe all you would need is top feed injectors and to drill new holes in the housings to match the holes on the motor and possibly intake manifold. Do not quote me on this. It would be much easier to sell those and just buy WRX housings and have them ported. I do not know of many people who would go your route, not discouraging you as it would work, simply more work than needed.

well, If I send you the STi TGV's and pay the $7 0will you send me WRX TGV's

Bumpin this shizzle cause I need my STi tgv's done for my build. PM me Jon and I'll get them out to you.

TGV's waiting for a new home!

Sent you a PM. Waiting on a response :cool:

All PM's replied, all completed TGV's shipped and have more waiting to be shipped!

Great Service! TGV's look Great!

Thanks again!!

Thanks again snodork, glad you like them. All sets ready to go!

Glad to hear everyone is happy! More TGV's ready to ship!

Just got my TGV's in yesterday. They look awesome and the turn around time was rediculously short. :D

+1 for Granny's Garage, I'm another satisfied customer of his great work.

Me too, great prices, and very fast service!!

Is there a vendor review thread on Granny's??:confused:

EDIT: Just made one:) Go post in it in the Vendor review section!!

Thanks again everyone, glad to see everyone is happy!

If anyone knows where i can find some 07 STI TGV's, let me know.

More ready to go!

really i need tgv for my 07 sti

Email sent.

Do you have any Cores for an '04 STi? I am highly interested.

Yes, Cores are ready for an 04 STI, i'll shoot you a PM.

ready to ship!

How's it going Jon?

I tried to send you a private message requesting a TGV housing. But your PM box may be full or you're not accepting PMs. In that case, here is a copy of the PM I tried to send you. Hit me back when you get a chance.

Hi there Jon!

I think I'm ready to purchase a fully modified TGV delete housing from you. no motors, no rods, no sensors, no BS... with enginuity i can effectively remove all CELs related to that. Let me know if you still have some in stock. I'd like to pay the cost of the delete housing plus a core chage and hope to get the core charge back when I send you my stock TGV housing.

btw, you don't include TGV to head gaskets by any chance do you? if not, i guess i'll have to get them seperately.

let me know.

- Shek

What do I have to do to get TGV deletes for an 03 wrx? and what is the price?

Please send all questions or purchase requests to:

xgrannysgaragex@yahoo.com

Do you have any side feed tgv's ready to ship. My tgv's are boxed up ready to go let me know

-Vic

i need 07 tgv jon ported and everything email sent thanks Tim

bumplease

were are you

Thanks again everyone, glad to see everyone is happy!

If anyone knows where i can find some 07 STI TGV's, let me know.

More ready to go!

I need the TGV's deleted from my 07 STI. Can you also hone out the injector seat and install my 1000cc precision injectors and how much would the charge be?

any tgv deletes for 02 wrx in stock?

No more TGV's in stock but if you have a pair they can be sent in to have the service performed.

Does this service mean I will obtain better engine response at past 6,000rpm? My EJ205 revs up to 10,000 rpm at the moment, but I get only minimal power gains after 6,000 rpm. Feels like the turbo/engine is out of breath. I have made no throttle body/intake mods so far.

Current internal engine mods:
RS Sleeved
Arias 8.76:1 static compression ratio forged pistons
Eagle forged rods
Supertech nitrate coated valves
Supertech valve springs
Supertech titanium retainers

10,000 RPMS??? :eek:

Well, this is a basic must have for anyone with an 18g or bigger turbo as these butterflies inside of the TGV's will restrict air flow. In your case at 10k rpms i would have to say you want this modification.

Nice set up though.

Got any WRX TGV's in stock? Please PM me back. Thanks.

i am interested in some tgv deletes for my 05 sti, if you have some in stock, or when you get some in stock let me know. Bc i deffinately cant afford the down time :D

i am interested in some tgv deletes for my 05 sti, if you have some in stock, or when you get some in stock let me know. Bc i deffinately cant afford the down time :D

holy moly. i only pressed the post button twice

e-mailed

i guess you could chalk me up as needing some 07 sti deletes also. Can you pm me a price with them poweder coated wrinkle red also, thanks!

When is a good time to get a TGV Delete? this is my current set up.

Helix TBE
STI Upipe
Injen Shortram
AP Stage 2

Upcoming

vf39 or vf34 or 16g
CSS FMIC
565cc injectors
Walboro Fuel Pump.

Could this just work with my stage current set up with a protune? or is should this be only used with a larger turbo and bigger supporting mods?

It really is up to you, TGV deletes simply open up the air flow a bit. For larger turbos this passage constricts the air flow very much due to the mass amount being forced in. I believe smaller turbos will see a benefit just not as great as a larger turbo. Any time is a good time to do these especially if you have any thought it your mind about upgrading to a larger turbo.

Hope this helps

How much of a power gain is it? $75 is bad at all lol

More of a supporting modification. Its not like you're going to say, "Wow! I can really feel that in the seat of my pants!" But it is very beneficial.

i helped my friend take the TGV's off his car last night. Then I stood there for an hour and watched his cutting. I def will be getting a set soon cause I am not doing it myself.

If you are having the TGVs done might as well get everything match ported and polished too. Knife edge to throttle body, and clean everything else up too. I too offer these services to members on the board.

Thats nice of you to offer your services in someone else's thread...

yeah not to cool, not to mention you don't really need all that done, unless you are running a race motor.

Just got my TGVs back from Jon. They look great, especially for the price paid.

did you get any wrx cores yet?

im gonna start a rebuilt soon.....
any core you have for ej255? ill send mine to you for a refund after i have em taken out.drop me a pm

pmed.


edit: nevmd who the hell do i pm !?! :lol:

Just got my TGVs back from Jon. They look great, especially for the price paid.

did you get any wrx cores yet?

Why is the last activity from Granny's Garage in 2007?? How or who the hell do i contact for some TGVs !!! :lol:

Question Will I have to do a tune after I do TGV Delete? and will they throw a CEL? Here is my build

Stock Turbo
Turbo XS Short Ram
Helix TBE
Samco Aftamaf hose
Perrin Turbo Inlet Hose
Stock IC with Forge Hose's
Perrin Crank Pulley

you probably will have to get protuned, but the protune will optimize everything you have, especially that short ram. Add a better boost solenoid like the GM, Prodrive unit, or tactrix sells one now too. The protune, boost solenoid and TGVs should net you a good deal of power and drive ability.

G Garage:

General Information

* Last Activity: 10-02-2007 12:15 PM
* Join Date: 04-17-2007


If anyone is interested in some of the best TGV service there is (welded and then grinded smooth) a a dirt cheap price go here:
http://forums.nasioc.com/forums/showthread.php?t=1497432

/You're welcome.

sweet man:cool:

any wrx in stock?