So Here is a pretty detailed install guide for 06/07's. Enjoy!

6000k H7

1.Remove caps from lights, drivers side cap comes off after the battery is removed
http://img.photobucket.com/albums/v452/timesnap/HPIM4096.jpg
2.Cap off the car
http://img.photobucket.com/albums/v452/timesnap/HPIM4097.jpg
3.Here is the size the hole should be drilled, about 23mm
http://img.photobucket.com/albums/v452/timesnap/HPIM4098.jpg
4.outside of headlight cover
http://img.photobucket.com/albums/v452/timesnap/HPIM4099.jpg
5.inside of headlight cover
http://img.photobucket.com/albums/v452/timesnap/HPIM4100.jpg
6.Passenger side ballast placement
http://img.photobucket.com/albums/v452/timesnap/HPIM4101.jpg
7.Plug these wires into the existing harness that your H7 bulb was plugged into. Mine was blue(pos) black(neg)
http://img.photobucket.com/albums/v452/timesnap/HPIM4102.jpg
8.Here it is taped with electrical tape. I did this to ensure it doesnt come apart
http://img.photobucket.com/albums/v452/timesnap/HPIM4104.jpg
9.Placement of driver side balast
http://img.photobucket.com/albums/v452/timesnap/HPIM4107.jpg
Your done!

another pic of passenger balast
http://img.photobucket.com/albums/v452/timesnap/HPIM4108.jpg

pics of cutoff and lights
http://img.photobucket.com/albums/v452/timesnap/P1040932.jpg

http://img.photobucket.com/albums/v452/timesnap/P1040923.jpg

Holy glare above the cutoff batman.

pretty standard on the halogen projector, nice write up though

Thanks and the glare is not noticable while driving and after 3 nights on dark roads nobody has flashed me due to glare.

On a side note: do the city lights always come on when the headlights are? I never noticed before, but now when the lights are on, the city lights in the top corner are too. The switch for them is in the off position so that is out of the equation. Any ideas?

i put my HIDs in but i wanted to hide them so i did. you open my hood you cant tell if i have them or not. it looks as if my 2.5i came with them!
Nice write up though.

Blake

aww another write up! I did a write up last week =)

very nice writeup including the drilling of the cap.

Thanks I figure you can never have too many writeups. Anyone know about my city lights remaining on now when my hid's are on?

Thanks I figure you can never have too many writeups. Anyone know about my city lights remaining on now when my hid's are on?
are you talking about the small bulb (194) at the top of the headlight housing?that is what i call the parking light but call it what you will. so i am replacing mine. i will have white LEDs in their place. the white is just about the same color as the HIDs. its great. hopefully that helped but if not just pm me or something and i am sure we could figure it out. just trying to help!

Blake:D

Thanks I figure you can never have too many writeups. Anyone know about my city lights remaining on now when my hid's are on?

Look at Axlxa's writeup, he shows what plug in the engine bay to pull to disable DRL.

do u know how to aim the projectors? i have a wrx 07 and my lights aim really low. what screw will aim em? pics will help me 10000x times better. =D thanks.

Great write up. Felt more confident to doing my hid.