Yep, you know you guys want this fine piece of automotive OBD2 tool
This bad boy can do it all. well, almost. but damn, this thing can do a lot. check it out.

http://www.camotoy.com/products/scangauge/images/IMG_2009_withdims.jpg
DIGITAL GAUGES Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!
Fuel Economy
Fuel Rate
Battery Voltage
Coolant Temperature
Intake Air Temperature
Engine Speed (RPM)
Vehicle speed (MPH)
Manifold Pressure (not available on some vehicles)
Engine Load
Throttle Position
Ignition Timing
Open/Closed Loop
SCAN TOOL The ScanGaugeII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the “Check Engine” light and avoid those costly trips to the mechanic.
Reads Trouble Codes
Reads conditions that set the Trouble Code
Clears Trouble Codes
Turns off the "Check Engine" light
Tells you when vehicle is "Ready" to pass OBDII testing
Make and store up to 10 rewritable special codes
to send to the vehicle computer
TRIP COMPUTER Automatically tracks four sets of trip data - Each with 11 individually stored parameters.
Maximum Speed
Average Speed
Maximum Coolant Temperature
Maximum RPM
Driving Time
Driving Distance
Fuel Used
Trip Fuel Economy
Distance to Empty
Time to Empty
Fuel to Empty
And since i cant take pictures worth a ****. here you go. stock photos :D :banana:



This bad boy has many different color options.

7 Standard screen colors and a custom setting with 63 possible colors.
Backlight for night use
Both display and keys backlit
User settable Off, Low and High

Easy to Operate

Simple on-screen operation
4 menu driven soft keys
User settable update rate (Slow, Normal and Fast)
A HOME key to quickly return to the start screen

User Settable Backlight Display Color

7 Standard screen colors and a custom setting with 63 possible colors.
Backlight for night use
Both display and keys backlit
User settable Off, Low and High
Big display - 50% larger than the original ScanGauge

Automatic Power Control

Automatic delayed power-down after engine shutoff
Automatic power-up when engine is started
Manual power-up with delayed power-down via HOME key




Non-Volatile memory
(stored information is not lost when disconnected)

User settings automatically saved
Up to 10 user commands can be stored and recalled
Today, Yesterday and Tank Trip data automatically saved
Vehicle settings automatically saved

Easy Installation - no Tools Required!

Cable detachable at the ScanGauge II. Can be connected on the back or side.
Easily move from vehicle to vehicle
Big display - 50% larger than the original ScanGauge
Compact Size - just 4.8"W x 1.5"H x 1"D




http://www.camotoy.com/products/scangauge/images/IMG_1999_Amber.jpg

http://www.camotoy.com/products/scangauge/images/IMG_1999_Aqua.jpg

http://www.camotoy.com/products/scangauge/images/IMG_1999_Blue_2.jpg

has plugs on both the side and rear, so you can mount it anyway you want.

http://www.camotoy.com/products/scangauge/images/IMG_3687_3688_M.jpg

and even a very nice cord :D
http://www.camotoy.com/products/scangauge/images/IMG_3680.jpg

I know you are expecting to pay 400 bucks for this, and damn, its worth it. but since we are all cool its yours for only
$160 shipped in all 50 states (plus Ca tax if you live here)


Please order from here.
BUY NOW (http://www.camotoy.com/products/scangauge/index.php)
Yep, cheap eh. :D

and remember guys, this thing can read Codes CELs, and reset them :D

Shane

Somebody please buy this and review it. Price is just a little more than a quality OBD2 Scanner.

heres a little review from the RS boards

i have one and its SOOO kick ass. resetting and checkin codes with out driving to a store is very nice.
This is also the best price. they are usually 170

hopefully you don't mind but here is an install pic took about 10 mins to run the wire
http://i124.photobucket.com/albums/p31/Mdobroth/P7050039.jpg

Great price!! it's $170 direct from them... man, I'm gonna have to find $155 somewhere. :D :D

totally ordered BOOYA

for all its features you cant beat the price, plus you can use it when needed to check out other peoples cars like a code scanner

this is exactly what i was looking for:banana: :banana: :banana:

nice. i might have sold out, but more was ordered and should be here Wednesday :D
Shane

Does this unit display real time boost like the Accessport?

as far as i know. will have to go double check. as they are reading the same sensors. but, i think the sampling rate might be different between the two units.

Shane

Thanks for your orders, all early orders were shipped. (had one late last night that didn't get shipped as i ran out of the first batch very very quickly) will have more on Wednesday and will ship them.
Shane

Any install instructions you could link me up to? I'd like to see how hard this thing is to hook up.

its literally you take the wire plug into your obd2 port and just plug the other end in the back of the unit

where you decide to place / mount it is up to you

yea, i can send you the PDF file (if i can find it) but all you do is hook it up to the ODB2 port under the dash. one super easy plug and you are good to go. I will try to get some pics later today of how it plugs in.

Shane

Ok, all orders were shipped out today at lunch. everybody should have gotten an email stating that (please check your spam filters) if you didn't get one, please PM me and i will double check.
Thanks again for all the orders and sorry for the wait.

Shane

will this read codes from obd2 mazda's and toyota's as well?

this will read codes from any ODB2 car.
here is a list of all the cars. (hope it copys over ok)
1994 Audi 100 2.8
1994 Ford Mustang 3.8
1994 Ford Cougar,Thunderbird 4.6
1994 Mercedes C220 2.2
1994 Mercedes C280,S320,SL320 3.2
1994 Nissan G20 2.0
1994 Toyota Camry,ES300 3.0
1994 Toyota T100 2.7
1994 Toyota Previa 2.4
1994 Volkswagen Corrado 2.8
1994 Volvo 850 Turbo 2.3
1995 BMW 750ci,850ci 5.4
1995 Chevrolet Blazer,S10 4.3
1995 Chevrolet Camaro 3.8
1995 Chevrolet Cavalier 2.3
1995 Chrysler Sebring 2.0
1995 Dodge Avenger,Neon 2.0
1995 Eagle Talon 2.0
1995 Ford Cougar,Crown Victoria,Thunderbird 4.6
1995 Ford Mustang,Windstar 3.8
1995 Ford Ranger 3.0,4.0
1995 GMC Jimmy 4.3
1995 Honda Accord 2.7
1995 Honda TL 2.5
1995 Honda NSX 3.0
1995 Jaguar AJ16(SC),XJS 4.0
1995 Jaguar V12 6.0
1995 KIA Sephia 1.8
1995 Lincoln Continental,Towncar 4.6
1995 Mazda Millenia 2.3,2.5
1995 Mazda Protege 1.5,1.8
1995 Mazda B3000 3.0
1995 Mazda B4000 4.0
1995 Mercury Grand Marquis 4.6
1995 Mitsubishi Eclipse 2.0
1995 Mitsubishi Expo,LRV,Summit 1.8,2.4
1995 Nissan Altima,240SX 2.4
1995 Nissan 200SX,G20 2.0
1995 Nissan Maxima 3.0
1995 Nissan Sentra 1.6
1995 Plymouth Neon 2.0
1995 Pontiac Firebird 3.8
1995 Pontiac Sunfire 2.3
1995 Rover New Model 4.0
1995 Subaru Legacy 2.2
1995 Toyota T100 2.7,3.4
1995 Toyota Camry 3.0
1995 Toyota Land Cruiser 4.5
1995 Toyota Previa 2.4
1995 Toyota Tacoma 2.4,2.7,3.4
1995 Toyota Tercel 1.5
1995 Volvo 850 2.3,2.4
1996 WORKS ON ALL EXCEPT: Ford, GM and Dodge trucks with diesel engines. VW TDI with a Black ECU
1997 WORKS ON ALL EXCEPT: Ford, GM and Dodge trucks with diesel engines.

Ford Explorer and Ranger - No Speed, Distance or Fuel Economy information (MPH, MPG, Miles driven).

1998 WORKS ON ALL VEHICLES EXCEPT: Ford Explorer and Ranger - No Speed, Distance or Fuel Economy information (MPH, MPG, Miles driven).
1999 WORKS ON ALL VEHICLES
2000 WORKS ON ALL VEHICLES
2001 WORKS ON ALL EXCEPT: Mercedes 300 Series.
2002 WORKS ON ALL EXCEPT: Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

Mercedes 320 is not compatible.

2003 WORKS ON ALL EXCEPT: Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

Mercedes 350 is not compatible.

2004 WORKS ON ALL EXCEPT: 2004.5 through 2005 Dodge Diesel Trucks.

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

2005 WORKS ON ALL EXCEPT: 2004.5 through 2005 Dodge Diesel Trucks.

Lotus Elise

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

2006 WORKS ON ALL EXCEPT: Lotus Elise

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

2007 WORKS ON ALL EXCEPT: Lotus Elise

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges

Thanks man. Don't sweat it -- it sounds easy to install.

no boost?

it reads MAP (manifold absolute pressure) but, i would still run a normal boost guage.

(post this in the announcement thread)

Just got mine today!

Awesome unit :D Its like a super-expensive digital gauge but with ECU access capabilities too!

Everyone should have one, seriously... I'm not kidding...

yea i got mine today and was like holy crap this thing is tiny and does so much "where have you been all my life!!"

Sent order for one :)

ordered.
but I put 'scangauge' in the payment memo instead of "scanguage"
:D

how bout egt or water temps??

ordered.
but I put 'scangauge' in the payment memo instead of "scanguage"
:D

:D, thanks was shipped out this morning. (and i fixed the spelling :D )

how bout egt or water temps??

yes, it does read the coolant temp. sorry no egt temps.

Shane

paypal sent.

Thanks, it will go out first am tomorrow.
Thanks
Shane

mine came!
Bump for Paranoid!

Thanks :D
glad you got it.

SHane

Thanks for the orders. they have been shipped out :D

Shane

bump it up

Complete newb question, but does this work well with an Access Port V.2 tuned car? Does it plug into the same port as the AP? How does it work with highly modified cars?

Please PM me the answers to these questions as threads have a habit of disappearing on me for some reason. I'll definately be picking one of these up if it works well with what I've got.

any chance of buying just the obd11 cord?

Yea, if you want just the cord, its 22 bucks shipped. if you want it, just paypal me at shane@camotoy.com

bummmmmmmp for an awesome product!

i pm'd you about it!

Ordered and after I get it I'll be able to comment on the Cobb AP V2 question. Someone once mentioned that aftermarket software can sometimes effect these generic obd scanning tools, I guess I'll find out =)

Just ordered mine. Now I can get rid of my pos scan tool.:D

Thanks, I will have to order more on monday, as i sent out my last one on friday. if you are ok waiting please let me konw, or i can give a refund.
just let me konw.
Thanks
Shane

How long do you think it will take?

I just placed the order this morning, and had them overnighted it to me, so it should be here tomorrow, and i would be shipping out tomorrow night :D

If you would like a refund just let me know, sorry about the wait. (i needed to wait till payday :D )
Shane

hopefully thats true and they are shipped out tonight! You have paypal :)

Ok, all orders shipped out today at lunch :D

Shane

Thanks for the orders, they have been shipped.
Shane

pm sent!!

Thanks for the orders, they have been shipped.
Shane

Thanks for the quick service.

Here's my install:

http://i95.photobucket.com/albums/l144/tylerforster/IMG_6852.jpg

http://i95.photobucket.com/albums/l144/tylerforster/IMG_6853.jpg

ok, just finally got off my ass and put them on my site too :D
www.paranoidfabrications.com

added a buy now button on the first page.

Here's my install:


How did you attach it to the window? I can't quite make it out?

I think he used a small plastic shelf thing and tucked it up under the headliner.
Shane

Sent paypal on Wednesday, its here on Saturday...that's how shipping is supposed to be done!!!! Shane you are the man!!!!!

Yea, i try :D as i also hate waiting for my stuff to rive :D

Shane

bump for a great deal :D
Shane

anyone have a pic of one these mounted in a 06-07 WRX/STI. I'm interested in one but I can imagine where I'd put it...

well you have a tr so single din right? i put mine in the spare din unit

I have mine in the little forester din spot under my radio. i need to finish hard mounting it, but i keep taking it out to show other people :D
Shane

think it's possible to make it fit in the spot for the clock on the dash? I may have to pick one of these up today after I cash my check...

i stole these two pics from another thread but here are a couple of diff ways...

http://i56.photobucket.com/albums/g176/Micker72/RebelXT080.jpg

http://img478.imageshack.us/img478/1556/dscn0802en2.jpg

I just put mine on the gauge cluster bezel, underneath the tac. It really doesn't cover much up except for the row of unnecessary lights down there, and it looks awesome sitting between the gauges in my dual gauge bezel...i'll post up pics when I get home tonight...

well you have a tr so single din right? i put mine in the spare din unit


I have a stock 6 cd player. Good ideas on the other posts..... hmmm

Also anyone currently using an AP and one of these?

I think thats pretty cool little setup there.......... I'll have to save up some.

This install took about 5 minutes, it's probably the easiest place to put it. Not the most original, but I like it...
http://i98.photobucket.com/albums/l260/JBravo920/GCwhite.jpg
http://i98.photobucket.com/albums/l260/JBravo920/GCgreen.jpg
And yes, the prosports are a bit brighter then everything else, but you can see what it looks like at night, it's actually a very close match...
http://i98.photobucket.com/albums/l260/JBravo920/GCnight.jpg

im guessing you just ran the wiring up and popped it outthrough the autometer pod?

i have my in the din but makes checkin it out more kidna hard i like your idea

yeah, then I just used the velcro that comes with it and stuck it on top. It's still a breeze to take off if I need to use it on someone else's car, but no cords hanging out or anything, so it works nicely...

nice install guys :D

Shane

bump for up sweet gauges :D