Welcome to AKIC.

And not to thread jack, but since we are kind of on the same topic, with 1/3 can of torco should you run 91 or 93 octane cobb maps?

93 should be just fine. that is why i run Torco in mine. it's set up for 93 or 90 with Torco...

Couple questions, do you guys just switch back & forth between a 90 base map and a 93 real time map depending on whether you put Torco in? That switch is quick right? I've only loaded the (long) base map before. I'm curious just how much of a difference it makes, I need to just get some and give it a try I guess.

Plus +2

93 should be just fine. that is why i run Torco in mine. it's set up for 93 or 90 with Torco...

Couple questions, do you guys just switch back & forth between a 90 base map and a 93 real time map depending on whether you put Torco in? That switch is quick right? I've only loaded the (long) base map before. I'm curious just how much of a difference it makes, I need to just get some and give it a try I guess.

1 Dump in the torco at chevron on a nearly empty tank (small funnel and rags suggested)

2 Switch to 93 octane or email tune torco map (takes about 5 to ten seconds for a realtime map)

3 Let it learn (which for me seems like a gradual improvement over the course of a whole bottle or three full-ups)

Smoothness and response are what I usually notice off the top. Performance ramps up as it gets several tanks of the happy juice.

speaking of torco... I gotta member to buy a couple cans for the trip home... They might only have 87 in some areas!!!

Woohoo I can get more power out of her then, I have been running the 91octane maps. :banana:

Oh and thanks to whoever made this a seperate thread :o