Yep, you know you guys want this fine piece of automotive OBD2 tool
This bad boy can do it all. well, almost. but damn, this thing can do a lot. check it out.

Now featuring Xgauge, lets you check
Horsepower
Fuel Trim
O2 Sensor values
and more
http://www.camotoy.com/products/scangauge/images/IMG_2009_withdims.jpg
DIGITAL GAUGES Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!
Fuel Economy
Fuel Rate
Battery Voltage
Coolant Temperature
Intake Air Temperature
Engine Speed (RPM)
Vehicle speed (MPH)
Manifold Pressure (not available on some vehicles)
Engine Load
Throttle Position
Ignition Timing
Open/Closed Loop
SCAN TOOL The ScanGaugeII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the “Check Engine” light and avoid those costly trips to the mechanic.
Reads Trouble Codes
Reads conditions that set the Trouble Code
Clears Trouble Codes
Turns off the "Check Engine" light
Tells you when vehicle is "Ready" to pass OBDII testing
Make and store up to 10 rewritable special codes
to send to the vehicle computer
TRIP COMPUTER Automatically tracks four sets of trip data - Each with 11 individually stored parameters.
Maximum Speed
Average Speed
Maximum Coolant Temperature
Maximum RPM
Driving Time
Driving Distance
Fuel Used
Trip Fuel Economy
Distance to Empty
Time to Empty
Fuel to Empty
And since i cant take pictures worth a ****. here you go. stock photos :D :banana:

This bad boy has many different color options.

7 Standard screen colors and a custom setting with 63 possible colors.
Backlight for night use
Both display and keys backlit
User settable Off, Low and High
Easy to Operate

Simple on-screen operation
4 menu driven soft keys
User settable update rate (Slow, Normal and Fast)
A HOME key to quickly return to the start screen
User Settable Backlight Display Color

7 Standard screen colors and a custom setting with 63 possible colors.
Backlight for night use
Both display and keys backlit
User settable Off, Low and High
Big display - 50% larger than the original ScanGauge
Automatic Power Control

Automatic delayed power-down after engine shutoff
Automatic power-up when engine is started
Manual power-up with delayed power-down via HOME key


Non-Volatile memory
(stored information is not lost when disconnected)

User settings automatically saved
Up to 10 user commands can be stored and recalled
Today, Yesterday and Tank Trip data automatically saved
Vehicle settings automatically saved
Easy Installation - no Tools Required!

Cable detachable at the ScanGauge II. Can be connected on the back or side.
Easily move from vehicle to vehicle
Big display - 50% larger than the original ScanGauge
Compact Size - just 4.8"W x 1.5"H x 1"D


http://www.camotoy.com/products/scangauge/images/IMG_1999_Amber.jpg
http://www.camotoy.com/products/scangauge/images/IMG_1999_Aqua.jpg
http://www.camotoy.com/products/scangauge/images/IMG_1999_Blue_2.jpg
has plugs on both the side and rear, so you can mount it anyway you want.
http://www.camotoy.com/products/scangauge/images/IMG_3687_3688_M.jpg
and even a very nice cord :D
http://www.camotoy.com/products/scangauge/images/IMG_3680.jpg
I know you are expecting to pay 400 bucks for this, and damn, its worth it. but since we are all cool its yours for only
$163 shipped in all 50 states (plus Ca tax if you live here)

Please order from here.
BUY NOW (http://www.camotoy.com/products/scangauge/index.php)
Yep, cheap eh. :D

this will read codes from any ODB2 car.
here is a list of all the cars. (hope it copys over ok)
1994 Audi 100 2.8
1994 Ford Mustang 3.8
1994 Ford Cougar,Thunderbird 4.6
1994 Mercedes C220 2.2
1994 Mercedes C280,S320,SL320 3.2
1994 Nissan G20 2.0
1994 Toyota Camry,ES300 3.0
1994 Toyota T100 2.7
1994 Toyota Previa 2.4
1994 Volkswagen Corrado 2.8
1994 Volvo 850 Turbo 2.3
1995 BMW 750ci,850ci 5.4
1995 Chevrolet Blazer,S10 4.3
1995 Chevrolet Camaro 3.8
1995 Chevrolet Cavalier 2.3
1995 Chrysler Sebring 2.0
1995 Dodge Avenger,Neon 2.0
1995 Eagle Talon 2.0
1995 Ford Cougar,Crown Victoria,Thunderbird 4.6
1995 Ford Mustang,Windstar 3.8
1995 Ford Ranger 3.0,4.0
1995 GMC Jimmy 4.3
1995 Honda Accord 2.7
1995 Honda TL 2.5
1995 Honda NSX 3.0
1995 Jaguar AJ16(SC),XJS 4.0
1995 Jaguar V12 6.0
1995 KIA Sephia 1.8
1995 Lincoln Continental,Towncar 4.6
1995 Mazda Millenia 2.3,2.5
1995 Mazda Protege 1.5,1.8
1995 Mazda B3000 3.0
1995 Mazda B4000 4.0
1995 Mercury Grand Marquis 4.6
1995 Mitsubishi Eclipse 2.0
1995 Mitsubishi Expo,LRV,Summit 1.8,2.4
1995 Nissan Altima,240SX 2.4
1995 Nissan 200SX,G20 2.0
1995 Nissan Maxima 3.0
1995 Nissan Sentra 1.6
1995 Plymouth Neon 2.0
1995 Pontiac Firebird 3.8
1995 Pontiac Sunfire 2.3
1995 Rover New Model 4.0
1995 Subaru Legacy 2.2
1995 Toyota T100 2.7,3.4
1995 Toyota Camry 3.0
1995 Toyota Land Cruiser 4.5
1995 Toyota Previa 2.4
1995 Toyota Tacoma 2.4,2.7,3.4
1995 Toyota Tercel 1.5
1995 Volvo 850 2.3,2.4
1996 WORKS ON ALL EXCEPT: Ford, GM and Dodge trucks with diesel engines. VW TDI with a Black ECU
1997 WORKS ON ALL EXCEPT: Ford, GM and Dodge trucks with diesel engines.

Ford Explorer and Ranger - No Speed, Distance or Fuel Economy information (MPH, MPG, Miles driven).

1998 WORKS ON ALL VEHICLES EXCEPT: Ford Explorer and Ranger - No Speed, Distance or Fuel Economy information (MPH, MPG, Miles driven).
1999 WORKS ON ALL VEHICLES
2000 WORKS ON ALL VEHICLES
2001 WORKS ON ALL EXCEPT: Mercedes 300 Series.
2002 WORKS ON ALL EXCEPT: Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

Mercedes 320 is not compatible.

2003 WORKS ON ALL EXCEPT: Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

Mercedes 350 is not compatible.

2004 WORKS ON ALL EXCEPT: 2004.5 through 2005 Dodge Diesel Trucks.

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

2005 WORKS ON ALL EXCEPT: 2004.5 through 2005 Dodge Diesel Trucks.

Lotus Elise

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

2006 WORKS ON ALL EXCEPT: Lotus Elise

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges.

2007 WORKS ON ALL EXCEPT: Lotus Elise

Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges

Wow that does alot for such little money. Didnt know this little device existed. Something else to order:D

Did it go up? I thought it was $155?

yea, i was told i was selling them to cheap.
but, if you want one for $155, i will honor that price. just paypal me at shane@camotoy.com and i will get it out asap.
Thanks
Shane

Shane, I remember reading (somewhere) that it has a lag on the live update info...is that true or was that an earlier iteration? I'd like to use this in leu of a boost gauge etc..

you can set it to update it quicker, BUT, i wouldnt use it for a boost gauge.
anything else, sure, just not as a boost gauge.

Shane

This wouldn't happen to have a basic clock function would it?

sorry, none that i have seen.

Shane

Thanks for the orders, all orders have shipped. and i still have lots in stock :D

Shane

It would work with an 04 sti?

yes it will.

Shane

justs a heads up, i will be out all next week, so any orders that come in will be shipped out monday the 21st.
Thanks
Shane

bump it up. all orders have been shipped.
Thanks
Shane

Thanks again for the orders, all have shipped. bump for a great little gauge.

Shane

any feed back from people running this in their 04 sti?

also what kind of sample size resolution for timing and boost? how many frames per second?

well, checking my manual it onlys says, fast, normal, and slow :D
normal seems to update maybe once a sec. but i wouldn't use this for a boost gauge.

i will try to get the actual numbers from then shortly

Hey there! Have already ordered your grounding kit. Could you pm me a price on this item shipped to 46614. Thank you!

you have a pm.

thanks for all the orders, they have all been shipped :D
still lots in stock and ready to ship

I just found out about this widget today.

If I get one I know where to send my monies :)

Does the scangauge AFR work with a wideband O2?

work with?
this reads from the ODB2 port.

Shane

does this come with any kind of mount, or is that something I would have to make myself?

work with?
this reads from the ODB2 port.

Shane
I researched it and found out that I needed to know.

I hope you keep these in stock since I will be ordering one in the next couple of months from you.

no mount is included. most people double side tape them to where they want.
also, the new gauges have a HP and TQ feature :D not sure how accurate it is, but its there.

Shane

thank you for the orders, all have been shipped out

I'll do one at $155.00 if your still honoring that price ...

I'll do one at $155.00 if your still honoring that price ...
i cant as that is below map pricing and i got almost cut off for that :D
but, if you can find a lower price from a approved vendor then mine i will match it.

Shane

so all functions available on this tool will work on a 2007 wrx tr ?

I think a few dont work. not sure the fuel pressure works on the suby.

Shane

Happen to know if there are any compatibility issues with Japanese OBDII ECUs?

there might be. some seem to work while some swaps seem to not want to work. however, on the ones that said they didn't work, they have not got back to me to see if the suguestions i gave them worked or not. but it seems that most people have having no issues with swaps. but, if you do get one and it doesn't seem to work let me know, and as long as the parts still look like new i can take them back.

Shane

lots in stock and the new ones read HP :D

pm has been sent

right back at you :D :D

shane

pm sent :) cool product!

thanks.

gonna order one from your website

name is thomas morgan

please pm me if there are any problems thanks

you have been paid via paypal please get it in the mail

with all the CELs my cars have been throwing lately, it seems like this is a no-brainer. i just can't remember my paypal password here from work.

the $20 is for a second cable, right? also, we will get the pricing listed in this thread if we buy through your link on the first page, right?

Just ordered one from you guys!

you have been paid via paypal please get it in the mail

man, this almost sounds mean :D your order will be in the mail first AM tomorrow.

with all the CELs my cars have been throwing lately, it seems like this is a no-brainer. i just can't remember my paypal password here from work.

the $20 is for a second cable, right? also, we will get the pricing listed in this thread if we buy through your link on the first page, right?

yes, your total will be what is on the main page.
Just ordered one from you guys!

Thanks, will be shipped out first am :D

just ordered mine. woohoo! $163...close enough...

Can you read KC (Knock Correction) and Advance Mulitiplier with it? Those values are supplied via the OBD2 port.

I dont think so. the full list of items is on the main page.
Thanks
Shane

Man I wished it did. I don't want to shell out $$ just for the realtime display of those two values. ScanGauge needs to step up the plate!

shane wasnt trying to be mean, just end of the day and happy i finely found something to replace that silly clock, although i might 3m it down on the steering column right in front of the parking switch.

anyhoo do you have any pics or instructions of anyone that has put it in the clock pod?

shane wasnt trying to be mean, just end of the day and happy i finely found something to replace that silly clock, although i might 3m it down on the steering column right in front of the parking switch.

anyhoo do you have any pics or instructions of anyone that has put it in the clock pod?

I know, just giving you a hard time :D i dont have mine hard mounted because i keep lending it out to people :D i usually have mine in the din pocket under the radio.

i have screen so that spot wouldnt work, i think i am gonna try it on the steering column, should work ok right there

Got mine today, love it so far! Though still working out some stuff. I think I may end up making myself a custom DIN pocket for it, or else go ahead and replace the clock with it.

got mine today, too. it's pretty fun, and has an impressive amount of colors. i'm having trouble figuring out why the mpg seems so much more accurate sometimes than others. but i cleared my misfire, so i can try to track down when it is triggering. pretty cool. definitely worth the money.

And I will also have to say, that fireball really burned my mouth, I had to spit it out after a few minutes. Damn you Paranoid Fabrications!

:diaf:

:lol:

ha, nice.
just a FYI. i am out of stock of these and have more on order. but seems ScanGauge is also out of stock and will be getting more in next week. all orders that have been sent in have been shipped but any new ones will have about a week delay.
Thanks
Shane

Do you know if you can recalibrate speedos with this? Like a change in tire size has made the speedo way off, can you correct it with this?

Thanks
Matt

How does this measure fuel economy? If it does it via injector pulse what if you have larger then stock injectors?

you set and calibrate your fuel tank size. you calibrate your speed/distance measurement, and then it can measure your fuel economy fairly well.

Do you know if you can recalibrate speedos with this? Like a change in tire size has made the speedo way off, can you correct it with this?

Thanks
Matt

not sure about that. sorry

you can send custom commands through the OBD2 port, so if you know one for recalibrating your speedo, then probably.

however, you can use the speedo on the gauge, and recalibrate that. the only issue is that the update rate is not satisfactory for a speedo...i only use it set my cruise control.

Will this gauge also woprk with other cars?

yes it will it works with 99% of ODB2 cars. i use it all the time on other cars.

Shane

Does anyone have pictures of the ScanGauge installed in the clock pod? I'm interested in seing how it looks during the day and at night

Does anyone have pictures of the ScanGauge installed in the clock pod? I'm interested in seing how it looks during the day and at night

sorry only night pic here: http://forums.nasioc.com/forums/showthread.php?t=1519571

according to the guy who posted that pic, it is not a scangauge, but a custom screen hooked up to UTEC. it does look like a clean installation, though!

i just have mine on top of the steering column with the supplied velcro. i like being able to remove it, so i can read any CELs that show up on my Legacy.

Doh! You're correct. Sorry.

just to let you guys know, i am out, but should have more today or tomorrow. seems these things are in huge demand with the current gas prices :D

Shane

ok, back in stock and ready to ship.

Shane

http://www.scangauge.com/support/vehiclespecific.shtml

reading @ their website says theirs more that can be displayed from vehicle specific gauges?

Can you now read other parameters from the ecu?

yes, but i don't think any work with subaru...at least not in my experience with my 05 STi. the communication protocol used doesn't have any extra features listed except the HP that's listed for all...i haven't tried that one yet.

great service, quick, and i got candy and a sticker!!!!
ordered it at night and like 5 min later had a invoice saying it was shiped out tomorrw. lol and 3 days later it came in.

thaks.
i am curently outof stock of these hope tohave more in a month. the manufacture is backorderd for a month LOL