SOLD!

I used this on my old EDM headlights on my bugeye. However my current JDM's don't have levelling motors so this setup is of no use to me anymore. What it is, is a headlight levelling switch off of a JDM bugeye. This should technically work with any WRX or STI headlights that have levelling motors. Really what you have to make sure is that you have sockets in your headlights that will hook up to the plugs in my harness. I'm also including the full custom harness with the switch. All you really have to do is hook up a power and ground (from battery) to the harness and illumination power and ground to the switch (tap off of another switch like cruise control or something). It's all pretty easy really. I would like to get $70 obo for both the switch and harness. See pics for details.

Thanks!

-Sergei

http://i46.photobucket.com/albums/f107/sergei311/DSCF2810.jpg

http://i46.photobucket.com/albums/f107/sergei311/DSCF2811.jpg

http://i46.photobucket.com/albums/f107/sergei311/DSCF2812.jpg

i have to go and look tomorrow and see if my JDM lights have a spot for the plug

i have to go and look tomorrow and see if my JDM lights have a spot for the plug

SOLD locally!