Iv'e been trying to install a Prosport Electrical Boost Gauge, but all the instrucitons iv'e found use the clock wiring, and I'm trying to mount my single gauge to the left of the steering wheel.

I don't know where to tap into an ACC on the left side.
And for the parking light, could i just tap it into the light swtich fuse?
I'm guessing the Red and White would plug into an ACC and
the orange (green light) would plug into a light switch.

I found this plug with these wires and was wondering if I could get my necessary power sources by splicing into them. Thing is, I wouldn't know which is which.

http://i19.tinypic.com/6lxlx8z.jpg

http://i6.tinypic.com/85zd1u8.jpg

anyone???



is it ok to just connect them to a ACC source fuse?

i would not just go connecting things you can really f- something up
just get a test light or go to scoobymods.com

Well I emailed Prosport and they told me to just hook it to the Cig Lighter Fuse, so thats what I did. Now it's on to hooking up the vacuum lines.

OK last question....the boost sensor has three wires (White) which i connected to the gauge. (Black) which is grounded. But i'm not sure where to connect the Red 12v wire, should i connect it directly to the battery or somewhere else????

I tapped into my clock wires.

use the cig again for the 12+v

Just save yourself the hassle, buy some extra wires and tap into the clock.