Air/Fuel Correction #1 (%)
Air/Fuel Learning #1 (%)Feedback Knock Correction* (degrees)Fine Learning Knock Correction* (degrees)IAM* (raw ecu value)Ignition Timing (degrees)Ignition Timing Advance* (degrees)Manifold Absolute Pressure (psi)Engine Speed (rpm)2.343.1200.351125.55.2715.67239402.3401.41112 2.55.6217.122538-17.972.3402.461121.55.9818.14262001.5602.8111205.9 819.01264501.5602.8111195.9819.88276600.7802.81111 85.9820.8928670002.8111176.3321.9129600002.8111166 .3323.6531030-0.7802.8111155.9824.9632000-0.7802.8111145.9826.2632790-1.5602.4611145.9826.8433950-1.5602.4611135.6227.1334430-1.5602.461112.55.2727.4235220-1.5602.461111.55.2727.4235900-2.3402.461111.55.2727.5736550-2.3402.461112.55.2727.5737180-3.9102.4611135.2727.5737740-3.9102.4611145.2727.5739260-3.9102.461114.55.2727.5739810-3.9102.4611145.2727.5740500-3.9102.461114.55.6227.5741280-3.910-1.411110.55.6227.5741920-3.910-1.4111105.6227.5742960-3.910-1.41119.55.2727.7143450-3.910-1.41119.55.2727.8644300-3.910-1.4111105.622845230-3.910-1.411110.55.9828.2946210-3.910-1.411110.55.9828.2947080-3.910-1.411110.56.3328.2947920-3.910-1.4111116.3328.4448830-3.910-1.411112.55.9828.5849700-3.9101.4111165.2728.5850710-3.9101.4111185.2727.715140

This is the first log i have ever done. I know my IAM is supposed to be 16. My car is an 02 wrx auto, with a 4eat. The mods are snorkus delete, k&n filter, up-pipe, turbo back. It is on the stock uce, i wanted to see what my ecu is doing before i try and flash. Please let me know what you think of this log. I know there are some parameters missing. This is done in 2nd gear as that is the only gear i can go WOT and not down shift.

Mod delete please, didn't put it up right. Trying to figure out how to post a log.

Try www.box.net

thanks, just found out about this. Gonna sign up tonight and post again

how to make a pretty (i.e. readable) log

1) open up your .csv in excel

2) replace the headings with the standard abbreviations:
Air/Fuel Correction >>> afc
Air/Fuel Learning #1 >>> afl
Feedback Knock Correction >>> kc
Fine Learning Knock Correction >>> flkc
IAM >>> iam
Ignition Timing >>> it
Ignition Timing Advance >>> ita?--not sure
Manifold Absolute Pressure >>> map?--not sure
Engine Speed >>> rpm

i also use:
engine load >>> el
manifold relative pressure >>> mrp
toa >>> throttle opening angle
iat >>> intake air temp

3) select all cells

4) format/text alignment/ left

5) futz with the column width to make it pretty

6) save as >> *.prn

7) open your *.prn file in notepad

8) ctrl-a/ctrl-c

9) in the forum message composer select # (code)

10) make sure the cursor is between the CODE tags

11) ctrl-v

12) hit preview and make sure it looks good!

13) submit!

fulham, thanks, i will try this when i get home from work today. Haven't had the time the last few days to repost it.