The "N45" line has an updated look with a revised backlighting to better match today's automobile dashboard. The LED lighting has been updated to function in the always on state. Additionally, some car dashboards don't have the always on LED so the gauge wiring allow for the backlighting to come on only when the headlights are switched on. Lastly the N45 line gauges perform the 270 degree calibration sweep on startup. The gauges are all electrical and come with the sending unit, boost hose, t-fitting and wiring harness.

Good news, for 08 WRX and STi owners, we have a gauge that can actually match your gauge cluster.

Here's some pictures:
Elec boost, EGT and elec oil press gauge with the DIN panel in a Subaru center pod for the 04-07 WRX.

http://www.j-spectuning.com/pictures/triple_04WRX.JPG
http://www.j-spectuning.com/pictures/triple_04WRX_night.JPG

04-07 WRX boost
http://www.j-spectuning.com/images/45mmredN_greenB_DN.JPG

04-07 WRX EGT gauge
http://www.j-spectuning.com/pictures/AEX-020-BWG_night.JPG

04-07 STi
http://www.j-spectuning.com/images/45mmredN_redB_DN.JPG

05+ LGT
http://www.j-spectuning.com/images/45mmredN_whiteB_DN.JPG

08 WRX/STi EGT gauge
http://www.j-spectuning.com/pictures/08STi_EGT_day_night.gif


Steering column pod kit
Here's a picture of the column pod in a WRX

http://www.j-spectuning.com/pictures/day_WRX.JPG

http://www.j-spectuning.com/pictures/gauge_pod_redN.jpg
http://www.j-spectuning.com/pictures/08WRX_night.jpg

Prices:
04-07 WRX look 45mm electrical boost...$100 shipped
04-07 WRX look 45mm EGT...$135 shipped
04-07 WRX look 45mm electrical oil pressure gauge...$135 shipped
04-07 STi look 45mm electrical boost...$100 shipped
08 WRX/STi look 45mm electrical boost...$100 shipped
08 WRX/STi look 45mm electrical EGT...$135 shipped
05+ LGT look 45mm electrical boost...$100 shipped

Add a steering column pod...$30 shipped

Package price for the 04-07 WRX boost + EGT + 2 steering column pods...$240 shipped.
Package price for the 08+ STi/WRX boost + EGT + 2 steering column pods...$240 shipped.
Package price for the 04-07 WRX elec boost, EGT and elec oil press gauge with the DIN panel and the Subaru center pod...$475 shipped.

To purchase, please go here (http://www.j-spectuning.com/index.php/cPath/21_24_34)[/b]

Please PM us for w/any questions. Prices include shipping to the 50 US states. Shipping to international location is additional. California buyers please add 8.25% sls tax.

Thanks,
Thaison
www.j-spectuning.com
sales@j-spectuning.com
408-772-9719

do they make an egt as well in the 04-07wrx look?

wrxtremeWGN,
Since we posted, we had a number of people have inquired about a 45mm EGT. We can get that manufactured as the tough part is already completed (stepper motor and casing). What are you looking at in terms of placement of that second gauges?
Thanks,
Thaison

i was going to utilize the steering column for both gauges. id personally be interested in a setup just like to boost gauge, w/ the mounting cup.

also if for some reason you dont release the new egt gauges, how different is the lighting between the old egt gauge and the new boost gauge?

wrxtremeWGN - the old EGT gauge would look very different from the new boost. And I just got word that the pricing on the EGT gauge would be $140. We can probably put together a package whereby the second steering column pod is free. So the total for the package would be $290 shipped for the elec boost, elec EGT and two steering column pods.

We're not actually trying to sell it to you at this point but throwing it out there for comment. If we gave them the go ahead today, the ETA on the EGT would be 1.5 months from now.

Thanks,
Thaison

Just noticing that also this new model goes to 30psi. The older ones only went to 25.

jblaine - thanks for noticing. I've been working on this gauge for 2 months now and took that for granted.
Thaison

Still waiting to reply on my PM's.

Thanks

We've gotten a number of questions from current owners of the stock boost gauge that would like to convert over to the Omori electrical boost gauge from the factory boost gauge.

For those converting from a factory boost gauge, you will NOT need to reinstall the t-fitting and run a boost line through the firewall. With this gauge kit, you can just take the boost hose that runs into the factory gauge and connect it to the boost sending unit included with the kit. Then wire the sending unit to the gauge. Follow the included wiring instructions from there and you're done.
Thanks,
Thaison

when is the rest of the line of the new gauges coming out?

will these dim?

onefasazn - we estimate that we will get the red needle/green backlight line out first. That will consist of the EGT, oil pressure and possibly oil temp. The red backlight gauges will take longer - probably around the July time frame.

jim1969 - these gauges do not have an option to dim. Due to the fact that it uses LED lighting, dimming these gauges are difficult as reducing voltage will just turn off the lighting after a while. Additionally, these gauge cannot be connected to the dimmer switch of the WRX - i.e. it cannot be wired to the radio harness of the WRX/STi.

Thanks,
Thaison

I just installed my 45mm boost gauge today, I LOVE IT!!

J-Spec was really awesome to work with.

Thanks Again Thaison

Lubes - Thank you!

i finally got a chance this weekend to hook up my boost gauge and install the pod in my wrx. gauge looks great and the pod fits nicely and doesn't block anything in my view. I saw someone asked if this would dim, i just wanted to say that when i first installed the gauge it was very bright and after consulting my friends father who is an electrician he suggested that i install a potentiometer inline so that i could dim the gauge that way and i could either leave that or measure the resistance at the proper light level and install a resistor inline. Anyone tried this or know if it will work and not harm the gauge itself?

07wrxwag - I am actually researching this myself. I should know the answer but essentially the add on circuit needs to limit the amperage without lowering the voltage. An LED needs a minimum voltage. A potentiometer will actually drop both the voltage AND amperage which won't actually get you to where you would want it. By the time you've racheted up the potentiometer to the point where it starts to dim the LED, the LED will shut down due to a drop in voltage. I've emailed an electrical eng buddy of mine for a low cost Radio shack solution to this. I hope to get something back this week.
Thanks,
Thaison

^^^ Keep me posted on that too!

well last night i headed over to radio shack and i picked up a couple potentiometers, and i had some leds that were set up to run 12 volts. I installed the potentiometer inline using 2 of the posts on the 'pot' and by doing this i was able to dim the led, but it would not shut off even with the 'pot' in the off position. essentially only 50% of the sweep of wiper in the 'pot' actually has any effect. But it was able to dim the led a considerable amount w/o ever shutting it off. also the good thing i read about 'pots' is that if they burn out they will either completely cut power, or go to full power of the circuit which normally you'd have to watch out for if the circuit couldn't withstand the whole 12volts but in our situation the gauges can use the full power. J-Spec is there anyway that this would void the warranty on the gauge, waiting to see before i move it from my set of leds to my gauge itself. But it should work exactly the same because the leds were 5mm leds with inline resistors which is most likely how the leds in the gauge are set up

well last night i headed over to radio shack and i picked up a couple potentiometers, and i had some leds that were set up to run 12 volts. I installed the potentiometer inline using 2 of the posts on the 'pot' and by doing this i was able to dim the led, but it would not shut off even with the 'pot' in the off position. essentially only 50% of the sweep of wiper in the 'pot' actually has any effect. But it was able to dim the led a considerable amount w/o ever shutting it off. also the good thing i read about 'pots' is that if they burn out they will either completely cut power, or go to full power of the circuit which normally you'd have to watch out for if the circuit couldn't withstand the whole 12volts but in our situation the gauges can use the full power. J-Spec is there anyway that this would void the warranty on the gauge, waiting to see before i move it from my set of leds to my gauge itself. But it should work exactly the same because the leds were 5mm leds with inline resistors which is most likely how the leds in the gauge are set up

If you do this could you please take and post pics of the process?

If you do this could you please take and post pics of the process?

yea if i go ahead and do this i will do a write up, just waiting to hear from j-spec about warranty on the gauge, as i don't think the leds in the gauge can be easily changed and don't want to risk burning them out or give out a diy that could have negative effects. This wouldn't be until this coming saturday, as i am away for the week and all my electronic stuff and tools are at home and its essential for the diy because the potentiometers need leads soldered to them, at least in my opinion.

07wrxwag - This will not void the warranty. You are not increasing the voltage nor are you opening the gauge or sending unit so you're fine.
Thanks,
Thaison

07wrxwag - This will not void the warranty. You are not increasing the voltage nor are you opening the gauge or sending unit so you're fine.
Thanks,
Thaison

good to hear, i am going to transfer the pot over to the gauge next saturday than and see if it works like it has when i've bench tested with the leds. I am going to try and find a pot with a higher resistance and an on/off ability so i can shut it off if wanted.

Thaison if you find any information out could you please post it incase your electrician knows a simpler way than what my electrician told me

thanks

07wrxwag: I spoke to the elec engineer and here's the situation. All LED's follow a voltage / current curve. At a certain point prior to cutoff (the LED turns off) which is approximately around 70% X max voltage (12V), the current passing through the LED is linear to the voltage. Decrease the voltage -> will decrease the current -> which will decrease the intensity. With a high resolution potentiometer, the LED can be dimmed within this range. Once the potentiometer is increased and consumes more than approx 30% of max voltage, the LED will turn off. So an LED will dim somewhat but unlike a filament bulb, there is a small region that the dimming capabilities will work. I'll work up a schematic diagram, test the "resistance" of the LED circuit and figure out what the optimal resistance range would be for the potentiometer. Stay tuned.
Thanks,
Thaison

Great! I've been waiting for the 45mm eboost wrx look gauges for months now.

Does the EGT come with the probe/sender?

chimchimm5 - yes, the EGT gauge will come with the probe, wiring harness and bung. We are just waiting on a review of the prototype before we forecast a general availability date.
Thanks,
Thaison

pm me pricing for

amber
boost, egt, oil pressure :) ganna use them in my gc8 dash pod

Pics of the gauge installed in a 05 WRX. Thanks to Lubes for the pics!
http://www.j-spectuning.com/pictures/day_WRX.JPG
Thaison

is the 04-07wrx style gauge the same one as the 02 wrx would need to match stock lighting?

Black07SS - the backlight would be the same - green. But the needle color is different. We no longer carry the yellow needle/45mm gauges. The only yellow needle boost gauges we have left are the 52mm elec and mech Omori boost gauges.
Thanks,
Thaison

Do these come with the column mount/pod thing?

do you have the 52mm? boost, oil, egt? in sti red? like 04?

wal.lin - the column mount is optional and can be added with the gauge order.

Kirrsace - that item is coming out and we are getting proto's soon but I wouldn't like to comment on actual production as of yet.
Thanks,
Thaison

How much for 52mm boost gauge 02-03 wrx style?

T_ReX78 - we have a clearance going on those gauges.
It's in our other thread //forums.nasioc.com/forums/showthread.php?t=1466981

Price is:
Mech boost...$90 shipped
Elec boost...$130 shipped

Call or PM us for this deal.
Thanks,
Thaison

Pic's from one of our local customers - 08 STI. Different application of the steering column pod.
http://www.j-spectuning.com/pictures/08STi_45mmgauge.jpg

pls. pm me price of the 45 mm red back lighting with white needle.Thanks

can i get an oil pressure guage?

PM Sent.

Please answer my PM.

Any pics yet of the 08 STI gauge pod mounted on the steering column? Also do you have any day or night shots with it on? I need to get one!

Bump for Thiason. I got my boost gauge installed this weekend and it looks great.

Great guy!

Any updates on other gauges with the white needle / red backlight? I'm an 08 STI owner and looking to make an order from you guys but still only see the single gauge on your site.

I think for the moment I'm wanting EGT and Boost, in 45mm for both (I guess it's the smallest available?) Possibly an oil pressure but that might be farther down the line.

Also any more pics of the 2008 style would be greatly appreciated :) Wanna see the day/night comparison!

^^ yes me too! I'm waiting to see some day/night pics

thaison, can you pm me a price for an 05 wrx steering column boost gauge kit shipped to 18960, do you have these in stock?

Thaison, here is the omori boost gauge kit you sold me, installed on my saabaru. It works perfectly and looks great with the factory instruments. It was fairly easy to install even for me, without any previous experience intalling a boost gauge. I was able to install the column mount in front of the tach and nothing is blocked from view. Thank you, J-SPEC TUNING rocks.
http://http://i72.photobucket.com/albums/i193/D-Rodman/92x/DSCN1673.jpg

Do you have one with a white face instead of black?

All,
Sorry for the lateness in replies.

Rmak - We only have the black face at this time. There is no plan at this time for a white face version of this gauge.

D-rodman - Thanks for the pic. Your package should be arriving today :)

45mm EGT gauge update:

We are getting the 45mm EGT gauge in the red needle/green backlight configuration in next week. At this time, we are not planning on a 08+WRX STi version of the gauge yet - sorry.

The 04-07 WRX look EGT gauge will be $135 shipped.
Thanks,
Thaison

Hi, if i dont buy the steering wheel pod, do i still get the black tube that the gauge fits into like in this pic :
http://www.j-spectuning.com/pictures/gauge_pod_whiteN.jpg
If this picture is with the steering wheel pod, can you post a picture of the gauge without the steering wheel pod?

If you don't purchase the pod, the black plastic tube in the picture is not included. Here's a pic of just the kit without the pod. It is highly suggested that if you don't have a pod, that you purchase the steering column pod. It is the only way we know of securing the gauge.
Thanks,
Thaison

Just curious, the LGT and 04-07 WRX 45mm Gauges, will those work in an 03 WRX? Also is the LGT gauge more of a white or blue color?

Thanks

DraconisWRX - Either of those gauges will work in a 03 WRX. The LGT look gauge has a white backlight.
Thanks,
Thaison

All,
We just got in the 45mm EGT gauge in the 04-07 WRX look. That is the red needle/green backlight. Price is $135 shipped. Package price for two steering column pods, 1 x elec turbo and 1 x EGT gauge is $275 shipped.

Pictures will be up later today.
Thanks,
Thaison

Here's a picture of the EGT gauge - day and night.
http://www.j-spectuning.com/pictures/45mmEGT_DN.jpg

bump for a great vendor..

08 WRX/STi look back in stock.

For July, we are running a special on the 45mm boost and EGT package for the 04-07 WRX. Purchase gauges at regular price and get the column pods for free. Please PM us for package deal.
Thanks,
Thaison

We just had a question about previous purchasers of the 45mm boost in the 04-07 WRX configuration and whether any specials apply. If you purchased the boost from us before, and we will provide a free column pod with purchase of a 45mm EGT gauge.
Thanks,
Thaison

Has anyone fit this into the Subaru OEM boost gauge holder (steering column)?

I guess it is only off by a few mm.

Would the boost line and elec be a straight disconnect and reconnect?

Thanks.

Has anyone fit this into the Subaru OEM boost gauge holder (steering column)?

I guess it is only off by a few mm.

Would the boost line and elec be a straight disconnect and reconnect?

Thanks.

That installation occurs all the time. The installation guide is on our website. The Lamco pod is 43mm while the Omori is 45mm. The electrical connection would not be a straight connect. You would need to pull wire from the radio or clock harness. Aside from that, you can use the boost hose as is and connect it directly to the included sending unit.
Thanks,
Thaison

Thanks I'll check it out.

Any more Boost and EGT gauges with yellow needle? 45mm or 52mm, doesn't matter

Any of the old school WRX 02, 03 instrument matching look w/yellow needle EGT guages 52 mm. Need to replace a broken one.

From now until the end of the month (Sep), free steering column pods with the purchase of a 45mm N-Series boost gauge. Please PM us for this deal.
Thanks,
Thaison

Bump for amazing product and customer service!

http://i3.photobucket.com/albums/y73/txl146/DSCN2311.jpg

Do you have any 60mm elec oil temp and oil pressure guages with yellow needle green backlight?

Also didn't see but does Omori have a voltometer same look yellow needle green backlight?

And do these come with all sensors etc that i need?

Also price shipped to 02817.

Thanks

Bump for qoutes

Scoobyap1 - Sorry man. We don't have the yellow needle Omori gauges anymore in the 60mm variety. Actually, that series have been discontinued. We still have a few boost gauges in 52mm in stock and one water temp gauge. Other than that though, we are out.
Thanks,
Thaison

Scoobyap1 - Sorry man. We don't have the yellow needle Omori gauges anymore in the 60mm variety. Actually, that series have been discontinued. We still have a few boost gauges in 52mm in stock and one water temp gauge. Other than that though, we are out.
Thanks,
Thaison

What about 52mm series with yellow needles?

Just bought one form your site and I was wondering how accurate is the boost gauges since it is now electrical instead of the old version mechanical.
Hope I can get it soon :D!

Thanks

When will 08 WRX/STi EGT be available?

Treefolk - the electrical gauge is just as accurate as the mech ones. The mech ones (regardless of brand) are quicker than the electrical ones. The main reason why we decided to only sell the elec 45mm now is that the calibration will not deviate over time. The mech ones have a tendency to get of center after a couple of years.

turboge - we are still working and spending our capital in releasing the new 52mm gauges. We plan on the EGT's in the 08+STI/WRX after the Christmas season.
Thanks,
Thaison

Thanks Thaison for sending me the "T" for my boost gauge. It works great!

You guys have one of the best customer service on nasioc.com

Thanks Thaison, I am looking for an electric Boost & EGT combo for two 08's when they are available. 52mm would be preferred.

I sent you an email, not sure if you got it or not, about 3 45mm and a bezel for the oem pod of a rs. Let me know.

thanks

do you guys have a 45mm oil temp gauge in green/red. u used to have it in the old models but i havent come across it in the new setup.

Thanks J-spec!

Got my gauge two day after I order from their site and I received the wrong color (green) instead of the one I order (red).
After I contact J-spec via email, the very next day my replacement gauge has been out and got it right before the weekend! This is awesome!!

As for the gauge, it is really good match with stock sti cluster

Pros:
Easy to read during day or night (My old Prosport gauge is really hard to read during day time)
Easy to install and good quality
Very accurate, read a little bit slower than my AP but just as accurate.

Cons:
Loud motor
A little bit brighter than your cluster if you mind. (during night)


I give this gauge 8/10 and I really love this little gauge!

turboge - We will be getting the new 52mm gauge out by the Christmas season but I'm not sure the white needle/red backlight version will be out by then. If not, it will be about the Jan/Feb timeframe. The gauges will be feature packed.
1) same high quality sending units with stepper motor
2) adjustable warning backlight - the entire backlight will change color/flash not just a small LED
3) integrated dimmer switch
4) wireless remote
5) backlight can be changed to white or red via remote

Definitely very nice set priced at about $140 /shipped per gauge. We will have discounts for sets as well.

Sc00by25rs - You have email.

bobanoid - we are applying all of our energy and capital on the 52mm series right now. We do have the 45mm EGT gauge with the red needle and green backlight.

Treefolk - thanks for your business and feedback.

Thaison

no i don't, u have pm

Our emails sometimes get caught up in Spam folders. Not sure why. I just sent you a req for the item that you are looking for. Please let us know if you don't see that in your email.
Thanks,
Thaison

J-Spec Tuning,

I am looking for the slightly older 52mm Omori boost gauge without the LED lighting and reading 25psi instead of 30psi. I would like to get the gauge with the steering column mounted pod, but I do not see that particular gauge on the site. I do see the older style green 25psi boost gauge on eBay in your eBay store. Do you still have these olders style gauges that you could sell me with a column pod? Thanks!

-Ed

Hi Ed,
We do have the older style 52mm 04+ WRX look gauges in elec boost still in stock. We don't sell the steering column pod for the 52mm though. There are several manufacturers of that pod including VDO and Autometer. Please PM us if you'd like to purchase that gauge.
Thanks,
Thaison

just bought 08 wrx style boost gauge with column, can not wait to install it!!

volcom0749 - thanks for your order. The item was just picked up. It should be there before the weekend.
Thanks,
Thaison

volcom0749 - thanks for your order. The item was just picked up. It should be there before the weekend.
Thanks,
Thaison

got it today! very fast shipping..looks amazing...thanks a lot!

Sent a PM about boost/oil pressure gauges.

Herro?

wwiifanatic - I though we sent you the reply already - 02/03 mech boost and oil pressure right? We have the 02/03 mech boost in stock but no oil press. In fact the only 02/03 gauge other than boost that we have in stock is water temp. Please let us know if you are interested.
Thanks,
Thaison

Yes possibly interested....Never got the PM though, so I'll need a quoted price if possible. And yes, the Mech Boost and Oil Pressure in 52mm 02/03 style. Will you be getting any of the oil pressure gauges in?

wwiifanatic - you have PM - I'm sure about it this time :)
Thanks,
Thaison

All,
We have a special till the end of this month.

45mm elec boost, EGT and two steering column pod for $230 shipped - only available in the 04-07 WRX look.

Please call or PM us for this package.
Thanks,
Thaison
sales@j-spectuning.com
408-772-9719

All 45mm boost gauges back in stock and we are dealing on the 45mm boost and EGT combo's.

Thanks,
Thaison

Thanks for everything Thaison, fast shipping and excellent prices!

Continuing the 45mm Boost and EGT + steering column pod combination for only $230 shipped.
Thanks,
Thaison

From now until Dec 25th, we will be offering 15% off all standard pricing on 45mm gauges. Contact us via email, PM or phone to take advantage of this offer.
Thanks,
Thaison
sales@j-spectuning.com
408-772-9719

All PM's responded to. Purchases up to 12/19 will make it in time for Christmas under included free shipping.
Thanks,
Thaison

Last day for free shipping to still make it time for Christmas.
Thanks,
Thaison

Any plans for the combo to match 05+ LGT (EGT)?

-Matt

ghedo icy - we have the 08+WRX/STi EGT coming out mid Jan. I know that doesn't help you out but we will get the LGT look EGT by early March.

Thanks,
Thaison

I'm a little confused, I was in Japan recently but found that Omori has closed their doors.. the site linked from j-spectuning.com is also down.. Do you produce these still?

I'm conflicted between buying a couple gauges from you, or waiting until february when the SPT one comes out, but i'm still not sure how well it will match... the pics look like the needle doesn't light up

jsquar3d - Omori USA has licensed the name and some of the technology from Omori Meter before they went belly up. Frankly, the new arrangement is a ton better than it was prior. We use to get gauges filled then struggle for another couple of quarters with our other orders with zero explanation.

The 08+ WRX/STi look gauges are definitely a good match. We have been selling gauges on NASIOC since 2002. I would NOT sell a gauge that did not have the needle light up. If I wanted to sell those, there are a couple of Autometer series gauges that would fit that bill. If you are not happy with the 08+ STI/WRX look gauges, just return it for a refund. We wouldn't offer that up if we weren't that confident. BTW, we've been selling these gauges since Feb 08 - absolutely not issues.

jsquar3d - Omori USA has licensed the name and some of the technology from Omori Meter before they went belly up. Frankly, the new arrangement is a ton better than it was prior. We use to get gauges filled then struggle for another couple of quarters with our other orders with zero explanation.

The 08+ WRX/STi look gauges are definitely a good match. We have been selling gauges on NASIOC since 2002. I would NOT sell a gauge that did not have the needle light up. If I wanted to sell those, there are a couple of Autometer series gauges that would fit that bill. If you are not happy with the 08+ STI/WRX look gauges, just return it for a refund. We wouldn't offer that up if we weren't that confident. BTW, we've been selling these gauges since Feb 08 - absolutely not issues.

Ahh my apologies, my wording was strange! I meant to say I'm unsure about the SPT gauge! in the photos from the catalog, it appears the needle isn't lit up... which I meant to say is making it seem the best choice would be yours as, like you said, they've been around a while and are clearly an awesome match! I'm glad to hear you're still doing well despite Japan's side closing down and will keep that at the front of my mind when I come to my final decision! Will watch this thread for news on the EGT as well!

Thanks

Ah ic. After reading your post, I went dug up the catalog you are referring to and see what you're talking about. It doesn't look like the needle is lit. I can see why they will limit the SPT boost gauge to 20PSi but if the needle isn't lit, there just wouldn't be an excuse. Their current boost gauge has that same issue and I would think they would fix it with 7+ years of customer complaints. I shouldn't complain though, if they completely had it together, we would have less things to sell...

Plenty still in stock and 08+ WRX/STI 45mm EGT's here by the end of Jan.

Lots of folks have been asking for a good night time pic of the 08+ WRX/STi look gauge. Thanks to mgiguere20 for the pics.

http://www.j-spectuning.com/pictures/08WRX_night.jpg

Technical phone support for installations 408-772-9719.
Thanks,
Thaison

We just received shipment of the red needle/white backlight 45mm boost gauges.

Also, the 08+STI/WRX look 45mm EGT gauges are FINALLY IN. Pics for the setup will be forthcoming.
Thanks,
Thaison
www.j-spectuning.com
sales@j-spectuning.com
408-772-9719

Here's pictures of the 45mm EGT gauge in the 08+WRX/STi look. We have boost + EGT + column pod kits for $250 shipped. Please contact us for this deal.
http://www.j-spectuning.com/pictures/08STi_WRX_EGT2.gif
http://www.j-spectuning.com/pictures/08STi_WRX_EGT2_night.gif

Thanks,
Thaison

http://www.j-spectuning.com/pictures/jspeclogo_sig.JPG
www.j-spectuning.com
sales@j-spectuning.com
408-772-9719

That looks really good! Hmmm *ponder* may be contacting you soon about that combo deal.

jspec, pm'd ya (last week actually)

oops. Right back at you.
Thaison

15% off on all 45mm gauges from now until the end of February. All items are marked down on our online catalog.
Thanks,
Thaison

Bump for last week of the sale.
Thanks,
Thaison

Oooh, sweet, might have to order some tonight. Any word on the 45mm oil pressure gauges?

sharkmonkey - the oil pressure gauge in the 04-07 WRX look is still on track for release in the spring.
Thanks,
Thaison

Cool, ordered the 45mm boost and EGT anyway. It didn't look like the EGT was discounted any, just the boost so I put that as a check-on item in the order comments. Looking forward to rounding out my factory gauge pack with the oil pressure once you get them.

sharkmonkey - The discount was not applied to the EGT gauge - which was a mistake on our part. We corrected the price on your purchase.

Thanks for your business,
Thaison

you have a pm :)

SXti - back at you :)

Do they still make the guages with yellow needles and green backlight?

do these have any kind of peek hold feature ?

Scoobyap1 - We're considering a special run of these gauges. I will be able to get an answer regarding price next week.

Baay - Due to the size of the gauge, they do not have a peak hold feature.
Thanks,
Thaison

bump for the most OEM looking gauges for Subaru and great seller

pm sent

txl146 - thanks!

grinch77 - you have pm.
Thanks,
Thaison

sent another one last night.

ok,ok,you got me....

ill take a boost gauge with steering column pod for an 04 sti...

Scoobyap1 - We're considering a special run of these gauges. I will be able to get an answer regarding price next week.

Baay - Due to the size of the gauge, they do not have a peak hold feature.
Thanks,
Thaison


Any word :confused: :confused:

Hi Scoobyap1 - We got word back but it's not as straight forward as I initially thought. Prices are based on the quantity that we would place the order for. Essentially, I would like to price these gauges at the same cost as the current gauges - $100 for the gauge itself and $130 for the gauge + pod. If I can't negotiate a lower volume commitment, we probably can't do it as the numbers that came back are huge...
Thanks,
Thaison

Do they still make the guages with yellow needles and green backlight?

please make a special run of these guages. i need an new egt guage and my oil pressure guage is off a little

easy jesus_151: Still working on the yellow needle green backlight boost gauge but unfortunately we will not be getting them in EGT or oil press. The numbers they are talking about are just too high to take on.

Thanks,
Thaison

If any one has some good predictions on the Final Four, enter in our FREE contest and you may win an Omori 45mm Boost+EGT+column pods package. Enter here (http://forums.nasioc.com/forums/showthread.php?t=1721085)

Thanks,
Thaison

i guess i have to replace my guages then. dammit :(

recieved it and installed yesterday... will try and get pics for you today...

looks great!!!:D:taco:

http://i39.photobucket.com/albums/e197/a320v/SDC10247.jpg
http://i39.photobucket.com/albums/e197/a320v/SDC10248.jpg
http://i39.photobucket.com/albums/e197/a320v/SDC10249.jpg
http://i39.photobucket.com/albums/e197/a320v/SDC10250.jpg

the guages look awesome. does anyone make steering column pods for the GC8 dash?

i'm looking to get EGT, Boost and oil guage in 45mm..

the guages look awesome. does anyone make steering column pods for the GC8 dash?

i'm looking to get EGT, Boost and oil guage in 45mm..

the pod that was sent was universal...it will mount up...;)

the gc8 dash doesn't look as high as the newer versions (7 and up)

ANyone tried this on a gc8?

----Dimmer accessory for LED gauges----

After numerous requests by WRX owners for a dimmer device for the gauges, we have produced a simple component that installs between the gauge and the power source that can dim the gauge by 50%. This would normally apply to 02-07 WRX owners as the dash is particularly dim compared with the 45mm gauges. We have installed it in a local WRX and the brightness is consistent with the dash.

Cost for folks who purchase our gauges is $10 - no we are not making money on these. This component can drive up to three gauges with no issues. Cost for those who have not purchased our gauges is $25 shipped.

We will be adding this option to our website. If you already purchased our gauges and would like to buy this component for $10 please PM us with your full name and address that we shipped the gauges to.

Thanks,
Thaison
www.j-spectuning.com
sales@j-spectuning.com
408-772-9719

easy jesus_151: Still working on the yellow needle green backlight boost gauge but unfortunately we will not be getting them in EGT or oil press. The numbers they are talking about are just too high to take on.

Thanks,
Thaison


+1 on boost gauge request - for my 03 wagon

Do you have the 02-03 look 45mm gauges?

How about 45mm oil temp gauges or oil pressure?

BeBop86 - I think I just spoke to you over the phone. We'll have a 45mm oil pressure in the 04-07 WRX look bu around May or June.
Thanks,
Thaison

Nope, wasn't me.

is the cheaper mech boost gauge available or just the eboost?

Jonnywrx - the mech boost gauge is no longer available. We discontinued it due to the eventual calibration issues that comes with every mech boost gauge. I think if you did a search, you will find out the electrical boost gauge is priced the same or $5 higher than the previous 45mm mech boost gauge.
Thanks,
Thaison

Thanks J-spec, I guess I was looking at really old threads then because there was like a $30 difference. Great product! I will be buying once I get the money together.

Thaison,
You got a PM from me.

Good to hear from you again. You have PM.
Thanks,
Thaison

just ordered my 06 sti boost gauge with pod combo. awesome price

Thanks for your purchase. Item has shipped and you should have it before Friday.
Thaison

All,
There have been questions about the dimmer accessories working on other brand of gauges. It should work but if it doesn't, we will offer a 100% money back guarantee.
Thanks,
Thaison

Installed mine about 3 weeks ago... perfect size and can see the entire MPH range


http://siegemx.homestead.com/files/Boost2.jpg


http://siegemx.homestead.com/files/Boost3.jpg

SXTi - Thanks for the pics. Glad you like it!
Thaison

just ordered the sti boost gauge. thanks for the fast replies to my pms jspec

SXTi - Thanks for the pics. Glad you like it!
Thaison

I'll have more pics up with the EGT gauge once I figure out what headers to go with.

Lot's of 04-07 WRX, 04-07 STi and 08 STi/WRX look in stock. Special pricing on the boost + EGT package. PM us for details on pricing.
Thanks,
Thaison

I got it Thaison, thanks a lot. Your fast response and customer service are second to none.

Service members - I wanted to provide service members 20% discounts on Memorial day but screwed up on the timing so I'll be running the sale the entire week.

From today through Friday, receive 20% off on all gauge orders in stock.
Thanks,
Thaison

K. Thanks to Thaison for being so patient with my issues with the gauge i purchased.

I purchased an 04-07wrx gauge for my 03wrx. The red needle does not bother me much anymore due to how well the gauge works. I bought the gauge to be used during my road tune session to find out the tolerance of the gauge reading against the electronic readings. To my surprise there was very little difference from the electronic readings and the gauge readings. The diagnostic sweep makes sure the needle is properly positioned. I have only encountered miss readings 1/10 times (i would just have to restart the car again, so no big deal, it fixes the misread)

At first i bought the gauge kit without the dimmer, that was a bad idea...
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs008.snc1/4177_637994342436_37500466_36975559_3117568_n.jpg

A week later, I bought the dimmer kit but it didn't work properly so I was sent a new one. This was the result.
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs032.snc1/4307_642187923466_37500466_37137764_7448392_n.jpg

Pardon the crappy mobile phone pix.
Also, when the voltage drops due to inconsistent subaru power... the green fades and shows the red back light. Other than that, I am very happy with this gauge.

zentrandi - great photos that show the difference. Thanks for your patience regarding the first defective dimmer.
Thanks,
Thaison

Just placed an order for a 45mm electrical boost gauge.

Roamrex - Thanks for your order. You should have tracking #.
Thaison

Sent you a PM about 45mm gauge for 08 FXT.

maverickar15 - you have PM.
Thanks,
Thaison

Customer picture - 45mm boost and pod w/dimmer acc in a Forester.

http://www.j-spectuning.com/pictures/Forester_boostgauge.jpg

Customer picture - 45mm boost and pod w/dimmer acc in a Forester.

http://www.j-spectuning.com/pictures/Forester_boostgauge.jpg

Very nice. Can't wait to install the gauge when I get home.

I was reading the instructions available online but I couldn't find any pictures regarding which wire to tap into, etc. Do you have this info available somewhere?

maverickar15 - you have PM.

For everyone's benefit, here's the wiring that I believe is correct:
Omori Wiring--------------------------->Subaru Wiring
Connect Red and Green together--------> Yellow/Green wire
White----------------------------------> Pink/Blue wire
Black----------------------------------> Black

JSPEC,

Any news on more gauges with the 08+ WRX look? I can only see 2 gauges (boost and EGT) in ONLY one size (45mm) on your website. Any plans for a 52mm 08+ look or more gauges besides 2?

Thanks!

Cusp - We are not looking at the 52mm 08+ gauges because there aren't any pods available. We've seen one ugly, overpriced pod so far but it is only for one gauge. So the questions is, if we made the 52mm 08+ gauges available what would you put it in?
Thanks,
Thaison

Cusp - We are not looking at the 52mm 08+ gauges because there aren't any pods available. We've seen one ugly, overpriced pod so far but it is only for one gauge. So the questions is, if we made the 52mm 08+ gauges available what would you put it in?
Thanks,
Thaison

I'm thinking about installing 3 gauges into a single DIN slot. I've seen 52mm gauges fit. Ideally - I would love to place the biggest gauge possible in the DIN slot.

What about adding more gauges with the '08 WRX look? Any plans for the future?

Thanks!

Cusp - You have PM.

For the benefit of all, we will not be looking to do a 52mm 08+ version at this time. The DIN slot is 50mm in height so any 52mm solution will be challenging at best.

We do have the 45mm triple gauge panel and the gauges fit perfectly. If there is demand, we can come out with the 08+ oil pressure in 45mm to complete the triple gauge offering.

Thanks,
Thaison

All,
We just got in the 04-07 WRX look 45mm oil pressure gauge. Now we can offer a triple gauge package with the 45mm DIN panel that fits the OEM center pod perfectly. We will have pictures up shortly.

For those, waiting for the 45mm oil pressure gauge, please PM us.

Price is $135 shipped. Price includes the gauge, sending units and most importantly the steel braided oil hose.
Thanks,
Thaison

Here are the pics for the new triple gauge package for the 04-07 WRX. The gauge kit and the triple gauge panel fits in the Subaru OEM center pod for that integrated look.

Price for the elec boost, EGT and elec oil press gauge with the DIN panel and the Subaru center pod is $475 shipped. Please PM us for this package.

http://www.j-spectuning.com/pictures/triple_04WRX.JPG
http://www.j-spectuning.com/pictures/triple_04WRX_night.JPG

I'm ready to install a Water temp and an oil pressure gauge in my 2008 Imprezza (regular 5 spd, not a STI or WRX:() and need to know where to install the sending units, Any one have location details?

You are referring to the older model Omori gauge right?

With the water temp gauge, you generally will need some kind of adaptor that clamps onto two ends of a cut coolant hose. We have some water temp adaptors in stock that would fit the older style Omori sending unit but I cannot guarantee that the openings would fit the diameter of the hose in a 08 Impreza.

As for the oil pressure sending unit, I am at a loss. I would imagine that there is still the oil galley plug on the 08 model that was on the previous 02-07 WRX models.

Thanks,
Thaison
I'm ready to install a Water temp and an oil pressure gauge in my 2008 Imprezza (regular 5 spd, not a STI or WRX:() and need to know where to install the sending units, Any one have location details?

No They Are Glow Shift gauges, and I want to get the temp of the coolant at the engine and not at the hose going to the radiator. I want the actual engine temp. Thanks for the suggestion - I will do more hunting for the proper locations - there has to be a plug or I imagine I can tap into the factory sending units using a tee and use that to add my own sending units. Just need to know where exactly the factory sending units are.
Thank you.

Thaison,

I have an older omori 52mm egt gauge, it is STI red, probably bought in 04 when I bought the car new... The trim ring around the gauge is really scratched and I was wondering if I could buy just that part to replace it?

Thanks,
Michael

do you know if steering column pod will work properly with autometer dual gauge pod? I am assuming steering column needs to be drilled just like OEM gauge pod?

hrtpumper - sorry for the late reply - unfortunately we can't help with the older 52mm gauges. Those have been discontinued and the bezels are no longer being manufactured.

gopsu - I've seen that config. It does work without any issues. The steering column does need to be drilled. You can find the installation guide on our website.
Thanks,
Thaison

Hi Thaison...I'm thinking of ordering the Boost gauge for my '09 WRX. Do you think I would need the dimmer kit for it? Also, are there any specials or discount currently or in the future available? Thanks so much.

Anthony

Ok...I received my Boost Gauge for my 09 WRX today and it's nice :)! It's smaller than I imagined. Anyway, I haven't installed it yet but I did connect it to a 12V source just to see the light intensity. I did order the Dimmer Control. Below is how it looks normally and dimmed. The intensity didn't lower that much and it's hard to tell from the pictures. You'll notice less intensity around the needle with the dimmed pic. The first pic is with normal lighting and the second pic is with it dimmed.

Normal Lighting
http://i110.photobucket.com/albums/n117/antgli/Misc/IMG_1279_Normal.jpg

Dimmed Lighting
http://i110.photobucket.com/albums/n117/antgli/Misc/IMG_1280_Dimmed.jpg

Free bump.


PM sent.

Is there special pricing for nasioc members? Or is it the same for all?

orderd boost guage with pod and dimmer yesterday for 04-07 wrx.. Whats the wait for shipping on these to 37616 ? God Bless,
Wesley

All,
For those of you who have been waiting for the installation kit for the 45mm oil pressure gauge, it is in and ready to ship. It includes a braided stainless steel hose that has a fitting that fits the Subaru oil galley plug.

Please PM use if you have an order in with us and we haven't already contacted you.

Thanks,
Thaison

Thaison,

Is it necessary to use template to install one? also, can I grab any screw from home depot for installation? Mine is MIA.

Also, can I purchase the black plastic cover that covers up wirings from you? PM me how much.

gopsu,
PM you.
Thanks,
Thaison

We're dealing on three gauge packages. Contact us for details.
Thanks,
Thaison
sales@j-spectuning.com
408-772-9719

No more 02/03 look gauges?

BeBop86 - sorry we have discountinued that.

Thanks,
Thaison

All,
04-07 WRX look and Legacy look back in stock.

PM us for package deals.
Thanks,
Thaison

Just now ordered a boost gauge for my Limited. :D