We have only a limited amount of Carbing and Hotchkis over stock that we want to sell to get ready for the racing season! So who wants to save? If you find any better price please pm me and we will match or beat that price.

Carbing Products are some of the best around. The fit and finish is awsome, and the quality of the part is even better. We test all of the products before we sell them (not the actual product you receive :D)and all I can say is WOW.
The carbing lower arm brace made the car handle a bit more precise and respond a lot quicker. Oh yea, did I mention it takes about 10lbs off the front end of the car and has extra bracing?? and it also has mounts to retain your factory splash shield!!! For more info on these products please pm me and I can help you with any questions you might have!


Carbing Lower Arm Bar: 02-07wrx and 04-07sti
$285+shipping:PM me for total pricing
http://i162.photobucket.com/albums/t268/ctracer911/carbing/project008Medium.jpg
http://i162.photobucket.com/albums/t268/ctracer911/carbing/project007Medium.jpg
http://i162.photobucket.com/albums/t268/ctracer911/carbing/project006Medium.jpg


Carbing Strut Tower Brace w/brake master cylinder brace: I will be honest with you my car is about stock right now and suspension has very minimal mods so the effects of this product were not substantial were I can say its amazing. But I did realize a less vibration on hard bumps, and the car felt like it didn't roll as much either. As for the brake master cylinder brace I haven't had a chance to change my brake pads and rotors since the first owner so the brakes still vibrated when hard braking but I will update this soon when the Dba rotors and hawk pads go on.

Carbing strut brace w/master cylinder brace:
$250 + shipping



Hotchkis: We have all hotchkis sway bar sets and springs available.

Hotchkis Springs: We have springs for all wrx and sti year and model. Pm me for pricing and specs.
They include detailed instructions for you DIY guys and new bump stops.
http://i162.photobucket.com/albums/t268/ctracer911/Hotchkis%20s/project004Medium.jpg

Hotchkis Sway Bars: These hollow sway bars are simply awsome. They include detailed instructions and all mounting hardware.
02-06+ WRX Sedan and wagon Street Kit: $350
25.4mm front bar, 88% stiffer non-adjustable 25.4mm rear bar, 3-position 50%,90%, and 160% stiffer Rear swaybar mounts, bushings and hardware.
02-06+ WRX Sedan & Wagon Auto cross Rear Sway bar: $335
25.4mm rear bar, 3-position 71%,123%, and 200% stiffer Rear sway bar mounts, bushings, hardware and rear end links.
04-06+ STi Street Kit: $350
25.4mm front bar, 50% stiffer non-adjustable 25.4mm rear bar, 3-position 50%,90%, and 160% stiffer Rear sway bar mounts, bushings, and hardware.
04-06+ STi Competition Kit: $560
25.4mm front bar, 50% stiffer non-adjustable 25.4mm rear bar, 3-position 71%,123%, and 200% stiffer Rear sway bar mounts, bushings, hardware, and end links.
04-06+ STi Auto cross Rear Sway bar: $335
25.4mm rear bar, 3-position 71%,123%, and 200% stiffer Rear sway bar mounts, bushings, hardware, and rear end links.
http://i162.photobucket.com/albums/t268/ctracer911/Hotchkis%20s/project002Medium.jpg
http://i162.photobucket.com/albums/t268/ctracer911/Hotchkis%20s/project001Medium.jpg

carbing subframe shipped to 92612?

thanks

Nice R33!

Nice R33!
Thank you we actualy have 2 haha. At first I was like a skyline awsome now I am just like yea thats my boss's car haha. The other one we have is amazing. The silver one is just all out racer, thing takes a beating and asks for more.



PM's SENT!!

Sway bar mounts available seperately?

how much are the hotchkis springs for a 2003 wrx and how much do they lower it?

are they too stiff for kyb gr2's?

how much are the hotchkis springs for a 2003 wrx and how much do they lower it?

are they too stiff for kyb gr2's?
I will Pm you.






Sway bar mounts available seperately?

Not at the moment but i am trying to get them seperate for the guys that just want mounts. Keep you posted.

BUMP! pm's responded to

Bump!
Just got back road testing the perrin PSR system + The carbing underbrace and Hotchkis sways. All I have to say is wow. The car feels solid. Turns feel a lot more comfident, its not as sloppy on initial turn in and setting the rear sway on stiff deff adds some fun on hard exits. So far so good. Fitment on everything was spot on. I did however have a small problem with the carbing underbace due to a custom downpipe but nothing a 1/8th inch spacer couldnt help.

Bump!!

qoute shipped to 35244. Will this brace work with Whiteline ALK and aluminum skidplate?

The aluminum skidplate will work if it still bolts up to the stock location and doesnt have any radical bends in it. The stock splash shield works just fine on it so it shouldnt be that much of a problem.
And as far as the whiteline ALK, that should work just fine. I use my lower arm bar with the perrin PSR and have about 1/2 inch left over.

pmed you

Hi pmd you.:)

how much is shipping to canada
for the carbing frame brace

Pm me your zip and i will find out for you. Pm's Replied!!

payment sent

All carbing braces have been shipped out.
Bump!!
I also carry the full line of carbing products, pm me for more info

Hi Josh just wanted to make sure that everything went through...

Thanks again,

Ian,

How much is the MY02 WRX sedan street kit shipped to CA94044?

Hi Josh just wanted to make sure that everything went through...

Thanks again,

Ian,

Hey whats up dude. I have it right here just need to get another address unless you want me to send it to your friends paypal addy? Just want to make sure it goes to the right place.

PM's Responded

^^^ PMd you about address.

thanks,

ian,

Bump!!

pm sent!!!

Pms Replied!

any carbing lower bars left? price picked up and/or installed?

yes we still have arm bars left. pm me and i will have all prices for you.

Bump!! pm's sent.

We have only a limited amount of Carbing and Hotchkis over stock that we want to sell to get ready for the racing season! So who wants to save? If you find any better price please pm me and we will match or beat that price.

Carbing Products are some of the best around. The fit and finish is awsome, and the quality of the part is even better. We test all of the products before we sell them (not the actual product you receive :D)and all I can say is WOW.
The carbing lower arm brace made the car handle a bit more precise and respond a lot quicker. Oh yea, did I mention it takes about 10lbs off the front end of the car and has extra bracing?? and it also has mounts to retain your factory splash shield!!! For more info on these products please pm me and I can help you with any questions you might have!


Carbing Lower Arm Bar: 02-07wrx and 04-07sti
$285+shipping:PM me for total pricing
http://i162.photobucket.com/albums/t268/ctracer911/carbing/project008Medium.jpg
http://i162.photobucket.com/albums/t268/ctracer911/carbing/project007Medium.jpg
http://i162.photobucket.com/albums/t268/ctracer911/carbing/project006Medium.jpg


Carbing Strut Tower Brace w/brake master cylinder brace: I will be honest with you my car is about stock right now and suspension has very minimal mods so the effects of this product were not substantial were I can say its amazing. But I did realize a less vibration on hard bumps, and the car felt like it didn't roll as much either. As for the brake master cylinder brace I haven't had a chance to change my brake pads and rotors since the first owner so the brakes still vibrated when hard braking but I will update this soon when the Dba rotors and hawk pads go on.

Carbing strut brace w/master cylinder brace:
$250 + shipping



Hotchkis: We have all hotchkis sway bar sets and springs available.

Hotchkis Springs: We have springs for all wrx and sti year and model. Pm me for pricing and specs.
They include detailed instructions for you DIY guys and new bump stops.
http://i162.photobucket.com/albums/t268/ctracer911/Hotchkis%20s/project004Medium.jpg

Hotchkis Sway Bars: These hollow sway bars are simply awsome. They include detailed instructions and all mounting hardware.
02-06+ WRX Sedan and wagon Street Kit: $350
25.4mm front bar, 88% stiffer non-adjustable 25.4mm rear bar, 3-position 50%,90%, and 160% stiffer Rear swaybar mounts, bushings and hardware.
02-06+ WRX Sedan & Wagon Auto cross Rear Sway bar: $335
25.4mm rear bar, 3-position 71%,123%, and 200% stiffer Rear sway bar mounts, bushings, hardware and rear end links.
04-06+ STi Street Kit: $350
25.4mm front bar, 50% stiffer non-adjustable 25.4mm rear bar, 3-position 50%,90%, and 160% stiffer Rear sway bar mounts, bushings, and hardware.
04-06+ STi Competition Kit: $560
25.4mm front bar, 50% stiffer non-adjustable 25.4mm rear bar, 3-position 71%,123%, and 200% stiffer Rear sway bar mounts, bushings, hardware, and end links.
04-06+ STi Auto cross Rear Sway bar: $335
25.4mm rear bar, 3-position 71%,123%, and 200% stiffer Rear sway bar mounts, bushings, hardware, and rear end links.
http://i162.photobucket.com/albums/t268/ctracer911/Hotchkis%20s/project002Medium.jpg
http://i162.photobucket.com/albums/t268/ctracer911/Hotchkis%20s/project001Medium.jpg



quote for 07002 shipped for the hotchkins springs, i do have questions about them too

Carbing lower arm bar shipped to 03062 please

carbing subframe shipped to 98058

Do you have to buy the kit or can you just buy the rear swaybar?