Introducing the Integraged Vent Gauge Kit by VMR Sport Tuning. For those looking for a clean, OEM look, boost gauge, our kit is the perfect choice for you.

http://www.velocitymotoring.com/forumimages/gauge_1b.jpg

The vent gauge kits are available for the following cars:
Subaru GDA/B/C/D Impreza (01-04)
Subaru GDE/F/G Impreza (05-07) / Saab 9-3x

As far as pricing goes, it is as follows:MSRP - $199
Introductory price - $149
Shipping is $10 dollars within the US.
Payments can be sent to paypal@velocitymotoring.com
Please include what color gauge you want and what vehicle it is for, in the comments/notes section, when sending payment.

We have plenty in stock, and items typically ship out the very next day, after you place your order.

Please feel free to PM or e-mail me with any questions you may have.

Don@VelocityMotoring.com (Don@VelocityMotoring.com)

http://i2.photobucket.com/albums/y30/gideonval/VMR/ventbox.jpg http://i2.photobucket.com/albums/y30/gideonval/VMR/ventbox2.jpg




The gauge kit will include:Drop-in vent gauge pod
Mechanical boost gauge - with a range of up to 30 psi (boost), and -30 mmHg (vacuum).
Boost gauge wiring harness
Rubber vacuum hose - 10 ft long
In-line vacuum line filter
Vacuum hose T-tap
Assorted wire taps
Misc. additional mounting/installation hardware
*The gauges come with either amber or white illumination, both will have an illuminating red gauge needle.

http://www.velocitymotoring.com/forumimages/gauge_2b.jpg


After many months of research and development, we are proud to announce that our drop-in integrated vent gauge kits are finally here and ready to ship out. Our integrated vent gauge kit is designed to be a direct OEM replacement piece, with no extra modifications necessary to the vents or the vent housings. All vent functions, excluding the sideways and up/down tilt, will remain functional. Everything is completely reversible, if you ever decide to return the car back to stock.

http://www.velocitymotoring.com/forumimages/gauge_3b.jpg
*Note: The PSI says -9.8 and it says 20 on the gauge because inhg does not equal PSI. If you do the conversion, you will see that they match up.

The VMR brand is the newest line of performance parts, wheels and accessories by Velocity Motoring. Whether your are looking to dress up your vehicle from our VMR Wheels line, add a little bit of extra 'go' from our VMR Sport Tuning products, or seeking all out, no compromise strength and lightweight alloys from our soon to be released VMR FORGED wheels, we strive to bring you only the best in quality and service at the most competitive prices.

thanks.

-Don

Don@VelocityMotoring.com (Don@VelocityMotoring.com)

PMs and E-mails replied to.

thanks guys.

-Don

BUMP for a nice boost gauge..

I'll take pics of mine soon...

thanks Don.


-Chris

http://i21.photobucket.com/albums/b299/cjsantos85/IMG_2346.jpg
http://i21.photobucket.com/albums/b299/cjsantos85/IMG_2347.jpg
http://i21.photobucket.com/albums/b299/cjsantos85/IMG_2348.jpg

Hey that's my interior :p

bump for a nice gauge.

got other gauges? other than boost gauge?

We are constantly trying to expand our line, but this is just the first of our product, so it is all that we have available right now.

Keep checking back, and see what new things we have.

PMs and e-mails replied to.

thanks.

-Don

I want this for my 05 Legacy y0

haha, thanks.

so what size gauge can it hold?

The vent comes with the boost gauge.

It is a complete kit, nothing is missing. Basically plug and play.

Thanks for being creative.

Thanks :)

We have it available for other cars, like VW, Audi, etc.

That's a pretty slick kit!

Thanks for all of the feedback and responses guys!

-Don

Does the vent still work?

What size is that gauge?

Yep, the vent still functions like normal. There's still the same amount of air coming out of the vents. If you want to test it, you can place a medium sized round object in front of the vents, and see how much air still is able to come through. Obviously, the vents will no longer be able to move sideways with the gauge in there. They are still able to tilt up and down though.

The size of the gauge is roughly 40mm. The vents are designed to work with our gauge specifically, however, there might be other gauges out there that are of a similar size. We recommend that our vents be used in conjunction with our gauges.

Let me know if you have any other questions.

thanks.

-Don

how much would the kit cost for an 05 audi 1.8T????????

Cost is the same for all cars.

$150 plus $10 shipping in the US. Complete kit, gauge and vent pod.

-Don

Just test fitted our 08 STI prototype, and it is looking good, hopefully we will have those in production soon as well.

-Don

PMs and e-mails replied to.

thanks.

-Don

For people who like pictures, here's a picture of one of our other gauge vent kits in a VW GTI:

http://i2.photobucket.com/albums/y30/gideonval/VMR/MKV_vent_1.jpg

any chance of green illumination to match the wrx's?

No green illumination available right now.

We only have amber/red and white at the moment. I think amber overall has a nicer look, cause a lot of cars come with stock amber light up gauges. White is nice if you have a slightly more modified interior, etc.

-Don

does the gauge swivel to aim towards the driver?

The gauge does not swivel. That would make the vent pod piece to be a whole lot more complicated.

We decided on the positioning of the gauge before putting it into production.

I went with an angle that sit/fit fairly flush with the rest of the dash and knobs/vents/gauges on the car, but still easily viewable from the driver's sitting position.

No green illumination available right now.

We only have amber/red and white at the moment. I think amber overall has a nicer look, cause a lot of cars come with stock amber light up gauges. White is nice if you have a slightly more modified interior, etc.

-Don

IMO, white seems to stick out a little too much against the otherwise all green illumination of the wrx (pre '08). whispers.."make it" ;)

Currently, there hasn't been enough demand for the green illumination to be made yet. It is definitely something we want to produce in the future, just when depends on how many we can sell of our current stock.

How bout I offer you guys green gauge replacements, at a discounted price, once we start getting them in? Hard to make promises on when, or a price right now, but I definitely will do my best to make everyone happy, haha.

Let me know.

-Don

thats a clean look...

Very nice idea! Wondered why it took so long for someone to give this a shot. Just a bump for you folks...since I already have a set of gauges. Nice idea! :) Best of luck!

-Danny

Thanks for the compliments guys.

We also have it available for Audis, VWs, and many more cars to come.

-Don

PMs and e-mails replied to.

thanks.

-Don

PMs replied to.

-Don

I love this kit. I would definitely get it in green, if it were available.

Thanks. If/when we ever produce any other colored or types of gauges, I will let you guys know.

-Don

i would buy one of they came in matching green

PMs and e-mails replied to.

-Don

Thanks for the orders guys.

-Don

PMs replied to.

-Don

PMs replied to.

-Don

PMs replied to.

Introductory price is still good.

thanks.

-Don

Definetly Interested if available in matching green.

How hard is it to change the bulb or LED's if need be?

ALSO- have you guys thought about developing a Drivers Vent Gauge? Maybe a pod that is compatible with 45mm gauges and still keep some venting around the gauge?

Thanks!

I am unsure of how hard it would be to change the LED. I have taken a look at the gauge, but it seems like it would be very hard to take apart, to get to the LEDs back there.

I personally think that the red matches the gauge needles, etc, pretty well. It also gives it a fairly stock and clean look for the car.

-Don

so wait im confused. Is the vent still functional or not? not just blows air but swivel?

Yes, air can still be blown out of it. The only thing that the vents can no longer do is swivel left to right.

Let me know if you have any other questions.

thanks.

-Don

bump..

Very interested in purchasing one of these. Been doing a little research. Was just wondering yall's install and performance experience is with this vent gauge :)

Are you asking for my own personal experience on installing it?

Sure, anyones feedback as far as their experience with the gauge. I've been looking for a clean mount for a much needed boost gauge and this looks perfect.

Here is a review from one of our subaru customers:

http://forums.nasioc.com/forums/showthread.php?t=1535285

and here's another one from an audi customer of ours:

http://www.audizine.com/forum/showthread.php?t=216595

Sounds and looks very promising for sure! So what have you been selling more of the white or red?

It is almost a split between the two. I personally think that the amber compliments the Subaru's interior lights pretty well (even though they are green).

Let me know if you have any other questions.

thanks.

-Don

PMs replied to.

thanks.

-Don

Payment sent :)

Thanks.

We have plenty in stock, so your order should ship out right away.

-Don

Your order is going out today. You should be recieving it in 3 business days.

Let me know if you have any other questions or if you need help with anything.

Also PM me with your e-mail, so I can send you a DIY write up I have for it.

thanks.

-Don

bump for WRX GREEN!!!:banana:

PM sent for install instructions :)

Sending it to you right now.


-Don

PMs replied to.

-Don

Gauge installed and looks great! Will post pictures later. Great instructions too! Install was simple and only took about 45 minutes. Thanks!

Sounds great. Let me know if you ever have any other questions or need help with anything else!

thanks.

-Don

Thanks for the orders guys.

They have all shipped out.

-Don

PMs replied to.

thanks.

-Don

Offer/price is going to be only good till the end of this month.

thanks.

-Don

bump.

I didn't see this whipper snapper thing you guys sell until a week or two ago. Now I'm hotlinking and stealing your bandwidtz and there's nothing you can do!!!!

http://forums.nasioc.com/forums/showthread.php?t=1193843