Google
 
Web NASIOC.com

View Full Version : AZ, AC Blower not working at all!!!


SpankySuby
07-22-2008, 12:57 PM
I have fixed the problem any one that needs help with there a/c, blower just pm me and ill be glad to help

I have an 02 wrx. So its not bad enough that its 108 down here :mad: its bad enough when my blower motor stops working :mad::furious::mad: and i have no idea where to go from here. so far ive checked the resistor pack under the glove box and the pack its self is fine all ohms out ok but the thing is its not getting any power on any selection that i make 0-4, i can here a relay come on when i select from 0-1 and the AC button works. the 0-4 selector is getting power but i cant tell if its sending power out can i just butt prob the other wires that comes out of the selector and see if they get power and also if anyone has a link to a wiring diagram or any more info that would be great.

thanks ahead of time

Zack

SpankySuby
07-22-2008, 05:54 PM
ok so ive got an update ive done more tinkering and found that everything is ohming ok the wires to the resistor pack is ok the selector it self is ok the only

thing is the blower motor is not getting power. so is there a relay or fuse im missing that controls power to the blower motor???

SpankySuby
07-23-2008, 12:21 PM
Ok so ive double checked every fuse that i could see lol and i wacked on the motor on every speed and nothing the blower doesnt come on at any speed ive checked the blower resistor i ohmed it(unplugged and in my hand) out(1st pin to 2,3,4. then 2nd pin to 1,3,4 ect.) by doing that everything ohmes to ~.1.

So my question is where does the blower get its power. there is a black and red wire and a black and yellow wire coming out of the blower where does it go.

Also ive checked the selector when its on position 0 the Green and red wire has 12.4v when i switch it to 1 and hear the ting of the relay none of the pins get any type of power.

So my next question is where is the relay.

SpankySuby
07-23-2008, 04:46 PM
ok more tinkering ive tested ground at the motor its got ground on all selections but yet still no power at the motor ive checked power at the #17 a/c fuse and it reads 12v so somewhere from the fuse to the blower motor its loosing power.

I WISH I HAD A SCHEMATIC

AlpoRS
07-23-2008, 05:58 PM
umm, this might be a dumb question, but does it have refrigerant in it? maybe you just need a recharge?

SpankySuby
07-23-2008, 07:11 PM
umm, this might be a dumb question, but does it have refrigerant in it? maybe you just need a recharge?

Nah man it wasnt the a/c (as in cold air) that i was trying to fix it was that there is no air to begin with.

SpankySuby
07-23-2008, 07:13 PM
Ok everyone with thegreg's help i finnaly found the problem it was my blower motor relay. you could still here the ting but the gate would not close so once i replace it all should be golden.

And for future reference if any one has a problem with there a/c or blower just pm me and ill be glad to help.