White 2.5rs
07-28-2008, 12:26 AM
I redid my wiring harness, I have all sensors... fuel... just no spark...
I noticed 2 of my wires on the coil connector are both grounded... this doesn't seem right. Please tell me where the 4 wires go, and what color meets what color :)
Alex
Cougar4
07-28-2008, 03:09 AM
The data I looked at shows the following:
Coil wires
1. Blue- ties to yel/blu pin 25 of ECU
2. Yellow- ties to grn/red fuse 11 and coil of fuel pump relay
3. Green- ties to ground
4. Red/green- ties to grn/wht pin 26 of ECU
White 2.5rs
07-28-2008, 03:18 AM
i dont have a blue... it looks black... and ive had the wires loomed so i dont think its faded
Cougar4
07-28-2008, 05:55 AM
Th numbers I posted are the pin numbers of the plug.
White 2.5rs
07-29-2008, 12:40 AM
it appears i cross connected the red/green & blue wires off of the harness
i switched them... but still no engine running
i did the crank/cam diag and have a signal from both of them...
maybe i got the sensors backwards...? but i doubt it
this is strange
it wont even pop
Cougar4
07-29-2008, 03:36 AM
Are you getting voltage to the yellow wire?