ok well i have a 02
i have door cards and seats from an 06 tr
the window switches on the driver side is from the 06
but only the top bar of the window switches light up
i believe more of them light up on the 06's, so i pulled out the switch and board
i noticed there is only 1 bulb/led whatever it is on the board, on the drivers one

so my question is
if i was to get the actual circuit board area where the plug connects to from an 06 tr, would that light all the window switches up? and will the plug still work for it?

im thinking of sending it in to prodriven auto to get it converted to red, but if i can get all of them to light up id rather use that one

PS. i held up the switches and looked through them, and it is see through where all the window switches are

anyone?

up
someone has to know

wat?

i'm not 100% sure what you are asking here, some pics may help.

I put 05 sti cards in my 02 wagon, when I did I had to modify the switch plate slightly to reuse my 02 window switches because the plugs were different.

Pretty sure you have to get the 06 tr switch board for the door cards too... my buddy with an 01 bugeye is having the same troubles. I DON'T THINK the plug for that is the same... I say go for the modify like yaya says.

thats what i was planning on doing was swapping the circuits
i just need to know if that plug is the same....and where the crap i can get JUST the window switches/circuit board and not pay 100+ bucks
ive been trying to find one from someone parting one out..but gah ><