Brian Crower Stroker kit - $2500 OBO Inspected, weighed and balanced kit has new rings, we will include a set of Cosworth Main and Rod Bearings as well as a set of new head gaskets for the price listed.

The Brian Crower EJ255 & EJ257 stroker kit incorporates a 83mm monster stroke. The Brian Crower WRX & STi Stroker kit will take your EJ25 up to an amazing 2.71L with an 102mm bore, or 2.61L with a 100mm bore. Brian Crower's EJ25 stroker kits utilizes premium steel billet connecting rods. Also included in the Brian Crower stroker kits are custom CP pistons, highest quality, steel alloy wrist pins, and a full ring pack and buttons. Brian Crower's Econo EJ257 rods are rated up to 600 maximum horsepower, while Pro Series EJ25 rods rated to 800+ horsepower.
Not only will a Brian Crower EJ257 Stroker Kit give your 2.5L WRX or STi, more displacement, it will also improve the strength of your bottom end, allowing you to run high boost levels without worry.

FEATURES & SPECS:
BC 4340 billet steel crankshaft (83mm stroke)
BC 4340 steel Econo or Pro Series billet rods w/ARP 220,000 psi fasteners.
CP aluminum forged pistons (any bore size, any compression ratio).
9310 nickel carbon steel alloy wrist pins.
Ductile iron plasma top rings, tapered second ring, low tension oil rings.
Fully system balanced and ready to install.

PLEASE NOTE: This is not a do-it-yourself project, it will require removal and reinstallation of the engine and all of its major components (timing belt, oil pump, etc.) In addition the block must be machined, cleaned, and bored to fit the new components. Expect to spend around $1500 on machine shop labor, plus whatever the installation and removal expenses may be.

2.61L Pro Series Stroker Kit:
8.5:1 Compression
100mm Bore
0.5 Overbore (No sleeves required)
83mm Stroke Billet Crank
Pro Series Rods
Custom CP aluminum forged pistons BC0628-100 NEW RETAIL PRICING: $3100





05+ Silver BBS' - $795

http://i226.photobucket.com/albums/dd166/Draco-Performance/UsedParts.jpg

We have two ej25 blocks here that can not have any more honing/boring done to them for 99.5 or 100mm bore. They are in great shape and can be used if someone wants to sleeve.

$500 OBO for the block
$1500 if we sleeve it for you with Darton sleeves

We can also complete the shortblock at additional cost.

turbo sold!


Either pm for details or e-mail (most effective) LBodine@Draco-Performance.com

Whats the deal with the BBS rims. The miles on them and the condition?

Whats the deal with the BBS rims. The miles on them and the condition?


They are in great condition, very clean and low mileage from what I know. They are at our shop. We cleaned them all up and they look great!

are the sti struts and springs from an 05+?

are the sti struts and springs from an 05+?

yes they are

temporary price drop....


BBS Wheels - $700

Those rear links will work with an 02 WRX won't they??? Let me know.

I dont know if the 05 sti links are compatible with the 04 and under.

The carbonetics clutch is SOLD!!!!!!!!!

[SIZE="5"]I have STi front and rear bumper, side skirts for sale off of grey (06+). Make me an offer if anyone wants them.

Those rear links will work with an 02 WRX won't they??? Let me know.

it is not just a direct bolt on replacement. you would have to change out a few other parts to accomodate.

any more info on the kw coilovers? miles? spring rates? what are they missing?

KW Coil Overs Sold!!!!

The BBS wheels, is that price for just the wheel or wheel + tire? If tires are included, what kind of tread remains?

Hi guys. My name is Miles Barden and I am the new guy here at Draco Performance. Leslyn asked me to respond to this question for her while she was out of the office.

That price is for either the wheels or the wheels and tires, not including shipping. The tires are the factory 225/45R17 Bridgestone RE070's and they are all worn down to the wear bars, about 2/32" tread depth. The tires are pretty much worn out and we were planning on dismounting them before shipping. If you would like the tires we will include them at no extra cost, however the shipping cost will increase due to the extra weight and size of the tires.

Drop Leslyn an email with your preference on the tires if you would like to purchase them.

Thanks,

Miles Barden
__________________
Draco Performance
18605 Northline Drive
Unit C-4
Cornelius, NC 28031
704-892-7661

Tuning*Suspension*Engine Builds*Quality Performance Parts* Race Track Prep*Enthusiast Educational Classes

Miles,
Thanks for the reply. I was hoping the tires were in good shape. I'm not looking for another set of wheels at the moment, but if a set of wheels with decent tires came up, I'd consider it.

Thanks for the info though!

We have two ej25 blocks here that can not have any more honing/boring done to them for 99.5 or 100mm bore. They are in great shape and can be used if someone wants to sleeve.

$500 OBO for the block
$1500 if we sleeve it for you with Darton sleeves

We can also complete the shortblock at additional cost.

Do the 05+ rear lateral links fit on an 05 forester XT. I thought they were similar but i cant remember right now. I may be interested if they fit.

pm me a price for the 05 sti rear bumper.

sti struts and springs still up for grabs?

original post updated with bc stroker kit

Updated BC stroker kit: includes new rings, Cosworth main and rod bearings and a set of head gaskets all for the price of $2500. Price does not include shipping.

$500 for the wheels?

bump for BC stroker kit

600 for BBS Wheels in original post. 05+ STi

bump!

wheels for $600, great deal for someone needing a second set for track purposes.