So Im in the middle of a JDM STi swap and Im doing all the wiring from the STi rather than using the 02 WRX harness. I've run into 3 wires that I can't figure out. Here are pics and descriptions of where they are. Thanks for any input.

http://img.photobucket.com/albums/v676/liquidsk8s/IMG_0452.jpg
This wire is right behind the cabin fuse box, not sure what it's for though as it doesn't exist on the WRX harness. Some of the wires run down to the mirror controls though if that helps clue us in??

http://img.photobucket.com/albums/v676/liquidsk8s/IMG_0454.jpg
This is a set of 6 wires. Two black/ two green which if memory serves me is meant for diagnostic tests of some sort and they should never be plugged together otherwise. The other two im not sure of both are white plugs. Any thoughts?

After some research I found that the larger white plug in the 2nd picture is a flash block meant for reading/flashing the ECU. So the green/black plugs plus the one white plug can be ignored.

All I need to find out now is the smaller white plug in the 2nd pic and the white plug from the 1st picture. Anybody wanna take a quick peek under their dash of 04+ STi's?

Heres another wire near the drivers side fender next to the fuse box in the engine bay. Any ideas?

http://img.photobucket.com/albums/v676/liquidsk8s/IMG_0463.jpg