Alright, so my drivers side window wont budge. The pass side and the door locks both work from the master switch and pass door switch, but drivers side window wont move. The motor is in working condition so i know it isnt that.

Can the switch just go out for the drivers side and not the pass?

If the breaker were to go out would it stop all windows? or are the windows on different circuits?

Anybody with any info that can help is much appreciated. Thanks in advance.

they should be on all the same fuse. check the owners manual to double check that. but you may check the wires the run from the switch to the actual motor. i've seen wires unpin themselves from plugs before. it's super rare but we just had a 97 gc in the shop where both wires had come unpinned. also follow the wires to check and see if there is any exposed or crushed wires from the motor to the switch. if you've got a buddy with the same model you may grab his switch assembly to see if it's internal as far as the switch goes.

Yeah i was thinking that the fuse would be connected to both windows...im actually gonna borrow his switch and see if it is just the mast switch, just gotta set it up with him

It was the switch

good deal