In "Time" mode, it's at 0.30 and the LED next to it, lights stays at ORANGE and could not be adjusted, NOR does it keep the engine running.

Also no cruise control function. Anyway to have Timer AND have cruise control???

I did not use the built in A/F function, there for I did not splice the white wire.

I also used HKS harness. Grounded the timer to this bracket that holds glove box on, with 2 connector on the bottom (hope everyone know where i'm talking about)

I have a MY03, and on the passenger side, there isnt a pink wire to splice the E-brake wire off of the timer, so I went in on the red one instead. Here:
http://us.f1.yahoofs.com/users/b50cfb9/bc/Turbo+Timer+Install/__hr_No+Pink+here..+so+spliced+Red.jpg?bc2vPt9Afjt AVMIq

I cut the Grey wire here:
http://us.f1.yahoofs.com/users/b50cfb9/bc/Turbo+Timer+Install/__hr_Where+I+cut+the+Grey+wire.jpg?bc2vPt9AimKMMeX i

I cut the Dark green w/ Black wire off the cruise control button. Here a look:
http://us.f1.yahoofs.com/users/b50cfb9/bc/Turbo+Timer+Install/__hr_Cut+Dark+Green+w.+Black.jpg?bc2vPt9AGK3YJwU4

Maybe i cut and spliced wrong wires????

I'm an idiot... Maybe because I'm new to Subbies...

I just realized that I looked at the diagram wrong, i had of where the pink wire was confused with I think rear O2 sensor wiring... I knew I did something stupid...

As far as the Green/Black wire, I botched it too..

Hey at least I grounded it right~! But everything is fixed.

I'm doing the Timer/Headunit/Defi Gauges control at the same time, so far everything else work perfect. Just messed up 2 wires, so I did alright.

Well it's 4:20AM and I came back from a perfect test run. So let me go celebrate.