These plugs are a direct replacement for the OE plugs. The IK20's are the same heat range as the stock '02+ plugs & the IK22's are one heat range colder.
These plugs are also good for most '90-'01 Subarus, please see Denso's application guide (http://www.densoiridium.com/findmypart.php) to find the part for your specific year & engine.

Colder plugs are good for modified WRX's that are running increased boost pressure. These are also good for most RS-T's that require colder plugs.

Denso Iridium Spark Plugs (4), Stock Heat Range or One Range Colder (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=DENIK) - $48 + $2 Shipping
99% of the orders placed before 3PM EST M-F ship the same day!

Here are some pics:
http://www.oakos.com/Merchant2/graphics/00000001/DensoIK22Front.jpg (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=DENIK)
http://www.oakos.com/Merchant2/graphics/00000001/DensoIK22Rear.jpg (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=DENIK)
http://www.oakos.com/Merchant2/graphics/00000001/iridiumtip.jpg (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=DENIK)
http://www.oakos.com/Merchant2/graphics/00000001/DenIRplugs.gif (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=DENIK)


Sincerely,
David Kearney
Oakos Automotive
www.oakos.com
sales@oakos.com
Tel: 248.969.2207
Fax: 248.969.4950
:)

hey dave
is iridium better than platinum? i always thought it was the other way around
i may be interested because i think mine r goin out although i only have 30k moderately modded

Iridium is better than platinum.

Here is a link to Denso's website (http://www.denso.co.jp/PLUG/iridium-e/index.html).

-Dave

PERFECT timing! I'll be placing my order in the next day or two! ;)

Excellent, I look forward to your order. :)

-Dave

I just added the pics to the original post.

-Dave

alright im in

You have a PM.

-Dave

What's the difference between the IK22 and IK20 Densos? I saw another vendor selling the IK20s for the WRX? I'm thinking about ordering some from you, but I just want to make sure they are the right ones for the WRX.
Thanks,
Pete

If so, then I'll be placing an order...

Thanks,
Kevin

ik22 are colder heat range plugs than ik20 ..

taken from denso site:

HEAT RANGE
The ability of a plug to dissipate heat from the combustion chamber to the cylinder head.

The heat range of a spark plug primarily depends on the length of the insulator nose.

Choosing the correct heat range is very important. Standard vehicles should use the heat range specified by the manufacturer. If your vehicle is not set to standard specifications you may need to change to a spark plug with a different heat range.

Spark Plug temperatures must remain between
450°C-900°C. Cooler temperatures won’t allow the plug to ‘self-clean’ by burning off carbon or oil deposits. This will lead to misfiring and poor acceleration. Hotter temperatures will cause overheating of the plug resulting in power loss, detonation, pre-ignition and possible engine damage.

Heat range numbering systems are different between plug brands. On a DENSO plug the lower the number, the hotter the plug so the higher the number, the colder the plug. Other Japanese companies use the same system, but European or United States companies use a numbering system that reads in the opposite way.

http://www.denso.com.au/dw/spark/spark_9feat.gif
http://www.denso.com.au/dw/spark/spark_feat.gif

these plugs are what i am putting in when it comes time to get new plugs ..

$48 is a good price .. i think HKS sells these rebranded for $23 each!!

WOW I gain 7 tenths in the quarter mile!?!??!

I am logged in under my personal UN because I am having some slight problems with my Internet connection.

Pete,
Like ronaldwrx said these are one heat range colder than the OE plugs. The IK20's are an equivilant heat range to the stock NGK plugs.

Kevin,
I am not sure which plugs are recommended for a turbo'd 2.5. I will look into it further.

ronaldwrx,
Thanks for answering that for me. :)

WRXGuyInTulsa,
I wouldn't count on 7 tenths. The plugs they replaced in that test must have been in pretty poor shape to degrade performance to that degree.


David Kearney
Oakos Automotive

what is the typical mileage to replace your spark plugs? i heard 30K. thats where i'm at now.. i am interested.

Originally posted by WeRX

WRXGuyInTulsa,
I wouldn't count on 7 tenths. The plugs they replaced in that test must have been in pretty poor shape to degrade performance to that degree.


I know... I was being sarcastic ;)

I'd like to see even 2 or 3 tenths...

HongKongBeef, Subaru's recommended interval for the EJ20T is 60k miles. This is assuming the vehicle is otherwise stock though.

WRXGuyInTulsa, I figured as much. :) I was just making sure.

Latinskllz, I haven't found any info yet on the EJ25 plugs. I will keep looking though.


-Dave

Where do I order ??

Danny, Here is a deep link to the plugs in our online catalog. We offer SSL encrypted secure online ordering on the site and accept Visa, Mastercard, & Amex. If you would prefer to order by phone you can give us a ring at 248.969.2207. Thanks a lot! :)

http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=DENIK22&Category_Code=200


-Dave

Thanks, Im at work right now, so i'll prolly be ordering it later tonight or tomorrow.....thanks

I received them today already!! Thanks Dave, that's really fast shipping :D

I got them for my 30k service, just in time :)

-Jenny

You are very welcome Jenny! :)

-Dave

I just ordered mine for 30K service! Thank you very much!

Thanks a lot for your order! I will send you a shipment confirmation email tomorrow after they are sent out.

-Dave

Sorry for the dumb question,
but Is this 4 for $48.00?

Brian,

Yes, this is for a set of four plugs. I edited the orginal post to make it more clear. :)

-Dave

Ordered mine... :D
Anyone have gap specs on these plugs?
And can you gap these plugs like the regular ones, or is there something special you have to do?

Thanks
Frank

from the Denso Iridium FAQ (http://www.densoiridium.com/faq.php)

Q. Do I need to set the gap?

A. Generally, no. The DENSO Iridium Power plug comes pre-set with a protective sleeve over the firing end, to protect the gap from accidental alteration. DENSO Iridium Power’s ultra-efficient firing power compensates for normally recommended gap settings that are smaller than the pre-set value. In the cases of vehicle modifications (nitrous, turbo-chargers, super-chargers, high power ignition systems, etc.), some adjustments may be desired. Or, if you prefer to remain consistent with factory specifications, you may adjust. However, please be careful not to place any stress on the fine center electrode during adjustment. You could accidentally break off the very hard, and therefore brittle, tip.

not sure if this helps .. good luck!

ron

Frank,

Thanks a lot for your order. Your plugs will be sent out at lunch time tomorrow.

Like Ron posted (thanks Ron! :)) you shouldn't need to adjust the gap of the plug. If you feel that your application warrants a gap adjustment here is another excerpt from the Denso FAQ regarding adjustment:


Q. How do I gap Iridium plugs
A. Before attempting to gap any DENSO Iridium Power spark plug, please review the specification chart to see the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with small variations in the factory set gap the ultra-efficient firing power design will compensate for those small variations. Should you decide to re-gap your Iridium Power plug, use extreme caution as improper gapping may damage or destroy the Iridium center electrode or porcelain center. To increase the gap size: Step 1 Use needle nose pliers or spark plug gapping tool to bend the ground strap up to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. To decrease the gap size: Step 1 Use the same method as above, however bend the ground strap down to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.


-Dave

All orders placed over the weekend and this morning have been shipped and all shipment confirmation emails have been sent. Thanks a lot everyone!! :)

We still have plenty of plugs here for anyone else that may be interested.

-Dave

Is anyone interested in these plugs in the stock heat range (the IK20 plugs)?

I am going to order more plugs soon, if there is interest I will get some of the stock heat range plugs along with more of the colder plugs.

-Dave

Received mine yesterday.....
I have never seen a spark plug like this before...
These bad boys are sweet.... very very nice!
Can't wait to slap em in.

Frank

Frank,
I am glad to hear that they made it there safely. Yeah, these plugs are pretty unique looking. Thanks again!

-Dave

But what is the recommended gap for a WRX?

The factory service manual states that the gap for the WRX plugs should be 0.7-0.8mm (0.028-0.031").

The Denso Iridium IK22 plugs come gapped at 0.8mm. The gap shouldn't require any adjustment.

-Dave

Thanks, I just want to make sure the gap wasnt messed up in transit even with the plastic pieces protecting them. I just want my ride to run as smooth as possible so I double check everything. Thanks for the info.

Ryan

You are very welcome Ryan! :)



-Dave

Some info for people
Iridiums are the best plug they are way better than platinums or split fire types.

2.5lt motors in the US come with standard copper Champion plugs these would be great help for them.

WRX motors come with NKG Rs they are just like the Denso Iridiums, no need to replace them untill even 100,000 miles some say Subaru says inspect and posible replace at 60,000.

The only need for new plugs in a WRX is if you are changing heat ranges witch helps greatlly with modded cars with more boost.

I got these for my car at 30,000 miles and didn't need them the stock ones looked brand new.

This are a great price on these plugs I paid $18 a piece.
Rob

Ordered a set. Please tell me you have them in stock and do not have to order them from Japan... ;)

_0wen_

DetroitWRX, Thanks for your input! :)



Owen,
Yeah, you should see your plugs in about 4-6 weeks. J/K!

Actually they'll go out in about an hour, you'll see them in 3-4 days. http://forums.nasioc.com/forums/images/icons/icon10.gif

-Dave

We still have over ten sets of plugs left.....

since i'm going turbo and need 2 ranges higher than stock...


??

According to http://www.densoiridium.com the stock equivilant iridium plug for the 2.5RS engine is a IK20 which just happens to be the same plug and heat range that the EJ20T uses. So these plugs (IK22) would be one range colder than the stock plugs in your engine. I am not exactly sure which plugs would be best suited to your application but I will be ordering more soon so if you want something that we don't have I can proably order it for you. Thanks a lot! :)

-Dave

Are these plugs better, or the same, as the NGKvx Platinum BKR7EVX-11. That the Vishnu (Shiv) kit uses?

Which one's are better? They both are a colder plug than stock.

D:D

I haven't seen the NGK iridiums first hand but I doubt there is much, if any, difference between the two brands. I have even heard a rumor somewhere that the NGK and Denso plugs are of the same manufacture, I can't confirm that however. Performance wise there would be virtually no difference between equivilant NGK or Denso plugs.

-Dave

Perfect timing. Just ordered a set. :)

I just order a set a colder plugs for my modded 30k WRX :devil:

Thanks Dave!

Thanks a lot for your orders! :) I will be dropping off your spark plugs at lunch time so you will have your shipment confirmation emails in several hours.

-Dave

Just received my plugs today. Thanks!!!

Within 24 hours got an email stating that they were shipped. Definately will buy from again.

Got my plugs last week - thanks!

Stock Plugs [Iridium] and Denso Plugs are gapped exactly the same [.027"]. What a PITA to install [especially the driver's side rear] - glad this isn't something you have to do every year... ugh.

_0wen_

I looked into what plugs are best for the WRX - What i learned from Subaru directly (Master dealer Tech) .....NGK is the recommended plug and other tend to not run right?....Of course i do not know this for sure?....I have bought the KGK Iridium thinking that they could be installed in like 10 minutes:mad: But of course this process is very involved - No disrespect intended for the vendor fo this just my worthless 2 cents:devil:

jwrx, Did you buy the plugs from me? If you are unhappy with them for any reason I would be happy to give you a full refund. :)

That "Master Dealer Tech" doesn't sound very knowledgeable. He is correct that NGK supplies the OE plugs but to say that a plug won't run right because it is a different brand is pretty ignorant.

-Dave

Some dealers just prefer OEM stuff because they are working for them.

I have had dealers tell me they used to be into performance stuff and as soon they worked for the dealer they learned their OEM stuff was better :rolleyes: .

Never seen any problems from this forum about using the Denso sparkplugs. I prefer to believe the people on this forum more than some "techs". The tech's may never touch the Denso's very often because most people would have to buy them themselves and then take it to the dealer and have them install it.

Got my plugs yesterday! The "power upgrade project" parts have started to roll in. :)

Thanks,

Tim

There is only five sets left here. I ordered more last week but I don't think that they will get here before the rest of these sell out. Also, I ordered some of the IK20's for anyone that wants these plugs in the stock heat range, the IK20's are a direct replacement for all '02-'03 Imprezas (2.0L & 2.5L engines) and also for most older 2.5L H-4's. You can check your specific application here: http://www.densoiridium.com/findmypart.php.

-Dave

Hi Dave...

I'm ordering a set. I'm battling a misfire/hesitation problem and want to have them on hand this weekend when I pull my plugs in case they are the problem. It's driving me crazy.

Thanks!!! Bump for a great vendor!

Don

Thanks for the bump Don! :)

When's your next party? I have to make up for leaving way too early last time. :D

-Dave Kearney

Do you have denso's for a 2.5 litre...?



Todd C.

Todd, Most of the 2.5L engines use the IK20 plugs as a direct replacement. You can check specifically which Denso Iridium plugs that your engine uses here: http://www.densoiridium.com/findmypart.php. I only have the IK22 plugs right now but I have ordered some of the IK20's and they should be here within a week or two.

-Dave

Only two sets of the IK22's left. I should be getting more mid-next week.

-Dave

PM'd you.



Todd C.

Todd, you I PM'ed you back.

Only one set left!

The next shipment should be here any day now.

-Dave

The new plugs have arrived. We now have plenty of the IK22's and the IK20's are now available for anyone that wanted some of the iridium plugs in the stock heat range.

-Dave

We still have lots of these here and ready to go! :)

-Dave

Free bump

I just placed an order for IK22's from your website. Thanks!

Order #1539

Orbiter,
Thank you very much. I'll send you a shipment confirmation after they go out in a few hours. :)

-Dave

We still have plently of these in stock.

:)

-Dave

one for me
SL

Hey SL, what's been going on? I'll let you know tomorrow when your plugs have gone out. Thanks! :)

-Dave

shoot me a price if I want red MAF pipe and red coolant pipe together... maybe we can have more business.

We got another shipment of spark plugs so we now have plenty of these in stock and ready for immediate shipment.

-Dave

Dave,

You've probably gotten my email regarding my recent order but just in case since I'm not sure my email is working, please send me IK22 instead of IK20. Thanks!

John W.

John,
I just received and replied to your email. I will be sure you get the right plugs. Thanks!

-Dave

John, I sent out your IK22's, you have a shipment confirmation email waiting for you. Thanks again!


Everyone, thanks for the tremendous response on these. All orders from last night and today have been shipped and all shipment confirmation emails have been sent. :D

-Dave

great customer service! I'll be sure to order for you guys again in the future.

Thanks a lot! Enjoy those plugs. :)

-Dave

We still have plenty of these in stock if anyony needs any. :)

-Dave

Just wanted to publicly thank a vendor for great service. I ordered some IK-22's and Kartboy hangers last Thursday morning and received them at home on Saturday. Just beat the ice storm!

Thanks again Dave!

lump

Lump,
You are very welcome! Thanks for the kind words. :)

-Dave

Bump for the spark plugs!

-Dave

http://forums.nasioc.com/forums/showthread.php?s=&threadid=345844

bump for fixing my hesitation!

JohnW,
I am really glad to hear that they helped your hesitation problem! :D

-Dave

Just ordered...looking forward to some increased reliability and less chance for detonation.

WRXMikeH,
Thanks for your order. I just got your plugs packed up and I will be dropping them off in a few minutes. Expect to see your shipment confirmation email soon. :)

-Dave

bump for a great vendor...ordered the plugs this morning and got shipped out already...

great customer service!

Thanks Dave! Other vendors should take note of this excellent level of service. Right up there with Gruppe-S and Quantum Racing in my book. I need to check Oakos' inventory again once I get paid. :lol:

Thanks a lot for the praise fellas! It feels really good to hear. :)

-Dave

We are running very low of both the IK22's and IK20's. I am expecting more soon, hopefully by the end of this week.

-Dave

UPS dropped off a few hundred more plugs yesterday so we now have plenty in stock. :)

-Dave

Bump for the spark plugs! :)

-Dave

The IK20's are running low. I'll be ordering more tomorrow so hopefully they will get here before they go out of stock.

-Dave

The IK22's are running low now. The next shipment of plugs should be here soon. :)

-Dave

UPS just dropped off a fresh supply of spark plugs so we now have plenty in stock. :)

-Dave

Bump for the spark plugs! :)

-Dave

Just to pitch in.

$50 shipped is A GOOD deal. Those suckers are EXPENCIVE. From what i gathered mostly cuz it is extremely hard to work with Iridium.

Iridim is NOT anything like Platinum. Platinum plugs are for longgggggg life. NOT performance. It is so cuz platinum sugz as electroconductor and thus does not make super hot spark and that saves the plug.

Now, i had installed set on my MY01 (IK20 is what you need to order if u have EJ25 motor). I did it together with grounding kit. And i gotta tell ya - It is really nice. Super smooth. More power across entire powerband. Probably not much power gain as much as some power "Found". Know what i mean?

guess it all comes down to - If u want GOOD stuff for your car AND can afford it then get them. You surely will be happy.

Good luck.

25PSI

Any replacement for the USDM STi... should I use colder plug ?

25PSI,
Thanks a lot for your input and review. Part of the high cost is due to the fact that Iridium has such a high melting point that conventional welding of the electrode wasn't going to work so Denso developed and patented a new 360° laser welding process.

http://www.densoiridium.com/images/laserwelding.jpg


Ziglabeu,
I'm sure your stock plugs are just fine for now, I'd recommend sticking with those for a while. BTW, do you know the PN for the factory plugs?


-Dave

Recommended spark plug:

STi model
NGK: ILFR6B

Hope this help...

Just ordered the IK22's.

The site said something about my shipping address and I'll have to be contacted. I don't know what's wrong, I always get everything shipped to my workplace. Let me know what's going on, the address is good though.

Ziglabeu,

I'll cross reference that number to see what the equivilant Denso plug would be.


dj_noose,

Thanks a lot for your order! I'll let you know tomorrow when your plugs have been shipped. :)

The message you saw when checking out on the website is normal. This happens on any product that is free shipping or a product that has the shipping cost included in the price (like the spark plugs and also the wheels). The shipping weight for the product must be assigned as 0lbs. otherwise you would be charged again for shipping. Having the product weight assigned as 0lbs creates the message "Unable To Calculate Shipping Cost" because any shipping rate x 0lbs equals zero. I am working on a way to make it less confusing, but in the mean time there is a small notice on the bottom of that particular screen that explains the message.

-Dave

Oh I C.

I like what I read about the iridium's smoothing out a slightly rough idle.

Order #2297

T-WRX, Thanks a lot for your order! I'll let you know tomorrow when your plugs and IC hoses have been shipped. :)

-Dave

Received, everything looks good in the box.

Thanks again T-WRX! :)

-Dave

The IK22's are running low. I ordered more a few weeks ago and I am expecting to see them soon.

-Dave

The spark plugs got here today so we now have plenty of both the IK22's and IK20's in stock! :)

-Dave

bump. :D

still available?
paypal?

Kenny, Yep, they are still available. And yep, we accept Paypal payments at "sales@oakos.com". :)

-Dave

I just send money to you through paypal.
Kenny

Kenny, Thanks a lot for your order! I sent you an email earlier because you didn't specifiy which plugs you want, the stock heat range (IK20) or one heat range colder (IK22).

-Dave

I want a IK22
Kenny

Thanks Kenny. I will have them shipped for you today, you can expect to see a shipment confirmation email from us later today. :)

-Dave

You just got paid! IK22 please.

Thanks.
Cedric

Cedric,
Thanks a lot for placing an order with us! I will have your plugs shipped out later today, you can expect to receive a shipment confirmation email later this afternoon. :)

-Dave

Have any Ik22's left?

Yep, there is now two sets left.

-Dave

Denso's site shows that the IK20's do not come gapped to the WRX's spec. They are not pre-gapped to the correct size for it. Be careful all.

Thanks for pointing that out. The IK22's however are pregapped within sped for the WRX. There is also instructions on Denso's site that show the proper procedure for gapping an iridium plug.

-Dave

...got mine today! i must say - fast service - great product - and will install tomorrow after work..thanks

-rod-

Sent money for the IK22's. What is the pre gap they are set to? Also I have always gapped iridiums just like other plugs where are the instructions of the website could not find them?
Link would be great!:D

Rod, I'm glad to hear that they made it there quickly and safely. :)

insanesuby, thanks a lot for your order! The IK22's come pregapped at .032" (0.8mm).


http://www.densoiridium.com/faq.php
Q. How do I gap Iridium plugs
A. Before attempting to gap any DENSO Iridium Power spark plug, please review the specification chart to see the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with small variations in the factory set gap the ultra-efficient firing power design will compensate for those small variations. Should you decide to re-gap your Iridium Power plug, use extreme caution as improper gapping may damage or destroy the Iridium center electrode or porcelain center. To increase the gap size: Step 1 Use needle nose pliers or spark plug gapping tool to bend the ground strap up to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. To decrease the gap size: Step 1 Use the same method as above, however bend the ground strap down to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.

-Dave

Bump.
And can Oakos post here when the 22's are back in stock? I'll order then.
Thanks,

Brian Broz

Brian, Thanks for the bump. I will post here as soon as the IK22's are back in stock. I'm hoping that it will be within the next week or two. :)

-Dave

Why are the "IK" series Denso plugs so much more money than the "IT" series? I run the "IT" series in my Lightning and typically pay under $60 shipped for 8 plugs. Both are Irridium. Not meant as a slam, just curious.

Don't know about the IT series but against reg. NGK's they smoothed out the power band nicely. As for more hp I gained 2 but that could of been the cool down period of changing the plugs. Great plugs and VERY GOOD PEOPLE to buy from.

Thanks guys, look forward to ordering from you in the future.

insanesuby, I'm glad you are liking the plugs. Thanks a lot for the compliments!! :)

-Dave

That 0.7 seconds is for a 250 cc 2 stroke motor, not a 2000 cc motor in a 3000 lb car.

Will you feel the difference?...unlikely

LOL, yeah, .7 tenths is a bit dramatic. I have never made any statement about gaining power from using these plugs. If you read through the thread you will see that these plugs have many advantages over a traditional plug, but making loads of extra horsepower isn't one of them. :)

-Dave

better mileage, better emissions?

Unfortunately, I don't have any specific data to substantiate either of those questions.

-Dave

The IK22 plugs are now back in stock! All back orders will be shipped out today. :)

-Dave

Dave,

Thanks for having these in stock and shipping out a set to me today.

My WRX will feel so much better (I hope!) when I get them installed.

Best regards,

GoodFinder :)

GoodFinder, Thanks a lot for calling and placing your order with us! I will send you a shipment confirmation email later today after your plugs are shipped. :)

-Dave

Just placed an order for the NK22's!!

thx
:disco:

CirrusWRX,
Thanks a lot for your order! :) Your plugs will be shipped out later today so you should have them in two to three days.

-Dave

Any word on plugs for the STi? Thanks!

02M3power,

Not yet, Denso doesn't have a listing yet for the '04 STi and, also, they don't have a cross reference for the ILFR6B NGK plug. I'll post an update as soon as I get any news. :)

-Dave

The IK22 plugs are now back in stock! :)

-Dave

are these better then the ngk iridium plugs? btw : i see it said 90-01. will these work on the wrx?

atomic, They are probably pretty much the same as the NGK's. I even heard an unsubstantiated rumor that they come right out of the same factory, but I haven't confirmed that. These plugs will definitely work in the WRX. Please let me know if you have any other questions. :)

-Dave

can a stock wrx use IK22 plugs? i plan to mod my wrx in the next few months... but i need new plugs now...

Dave,
You have an order waiting....

I i order a set of ik22's, can you pregap them per specification of vehicle?

ezparts, You shouldn't have any problems with the 22's in a stock WRX just so you don't drive like grandma (somehow I highly doubt that you do :D). A colder plug won't get as hot as the stock plugs and could fowl out if they don't get hot enough to burn off any deposits.

Beam, Thanks a lot for placing another order with us! I'll let you know later today when your parts have been shipped. :)

DirtstyleWRX, The 22's come pregapped within spec for the WRX.

-Dave

do you guys have any more?

i been waiting on these ngks, but i still havent got them yet, if i dont get them tomorrow, you can have my money... :T

There is about twenty sets of plugs still available. :D

-Dave

They have very fast shipping also. Thanks a lot!

ahh who cares.. i guess ill have 2 sets, i need them bad.. grrrr... where and how do i pay?

just ordered :D

gbwrx, you are very welcome! :)

atomicapples, Just click on this link to get to the product on our website. We offer SSL encrypted credit card ordering and accept Visa, MC, or AMEX. We also accept Paypal payments at "sales@oakos.com".

http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=DENIK

ezparts, Thanks a lot for your order! Your plugs have been shipped and you can expect to get your official shipment confirmation email shortly. :)

-Dave

BUMP!! Got mine today!!!! Great service and fast shipping as always!!! Thanks

Thanks for the bump! :D

-Dave

We just got a bunch more of the IK22's so there is now plenty available. :)

-Dave