I'm removing an AVC-r installed by the previous owner and will be returning to the stock boost solenoid and hose setup. Problem is, the previous owner didn't include the hoses/restrictors/etc. removed as part of the AVC-r install. What I really need are some detailed pictures of a stock setup so I can determine what I need from the dealer. Any help would be greatly appreciated. Thanks.

Scott Buchanan

Try posting this in Factory Forced Induction, you'll get a better response.

Try page 3 of this thread there are some pix...hope it helps

http://forums.nasioc.com/forums/showthread.php?s=&threadid=285594&perpage=25&pagenumber=3

the hose goes from the wastegate to the turbo outlet, and there is a t splitter between them that connects to the factory boost controller. if you hook up the hoses and don't get full boost, you did something wrong. it's really not difficult though.