Google
 
Web NASIOC.com

View Full Version : What goes in all the switch blanks of a WRX?


Drew888
01-18-2003, 05:05 PM
There are so many blanks that I am wondering that Subaru had in mind or better yet what option didn't I get that would have a switch where these blanks are?


Thanks,


Drew

dandbest
01-18-2003, 06:01 PM
The blanks that are right by the power mirrors switch were meant for heated seats, which Canada got.

Danny

munkis
01-18-2003, 06:24 PM
heated seats, rear fogs, intercooler sprayers. etc, all the cool stuff the us didnt get, but we did get the ultimate option in the end....

2004 Subaru WRX STi, 2.5L turbo, 300hp/300tq monstor! woooo!

Jay

gm6
01-19-2003, 12:11 AM
probably should be one for auto folding mirrors in jdm cars

WillieBill
01-19-2003, 12:52 AM
if you care, you can replace the one switch blank by the mirror controls with the coin holder from a non-wrx impreza.

Jejunum
01-19-2003, 11:31 AM
if you care, you can replace the one switch blank by the mirror controls with the coin holder from a non-wrx impreza.




how? where? etc :)

Full_Clip
01-19-2003, 11:39 AM
Ejection seats, cruise missles, and instant big breasted passenger.


Full_Clip opt-ed for the flame thrower.

Gargantua
01-19-2003, 11:46 AM
I have seen pictures of ABS dis-engagagement switches put in the area left of the driver as well.





Gargantua...throws matches at Full_Clip

Rich10
01-19-2003, 12:40 PM
I have my utec remote switch in one of the switch blanks.:)

Brady
01-19-2003, 08:55 PM
also the height adjustment on EDM sti headlights (JDM too?)

fastsubie
01-20-2003, 09:56 PM
I put a switch for my dual stage MBC silenoid in the single blank on the console and a switch for my IC spray in the blank closest to the stering wheel. I need more stuff to fill up the blanks! :lol:

-Fess

ldivinag
01-21-2003, 05:08 AM
mine is setup to control the twin .50 cal machine guns. then switch by brake handle turns rear view mirror controls for aiming...

Damien
01-21-2003, 11:24 AM
Originally posted by gm6
probably should be one for auto folding mirrors in jdm cars

Nope.. We have a small switch on the mirror control unit.. I'll try to elaborate...
http://home.attmil.ne.jp/a/at0miq69/nasioc/jdmmcu.jpg
on the right side of the steering wheel you will see a round dial looking thing and 2 switches next to it. The dial looking thing is the Mirror angle control... The switch with L and R parallel it is the mirror switch, and the switch to the far right (kinda faded) is the power open/close switch. Sorry for the poor quality pic.. but i ran outside to take the picture, and my car is covered in snow, so i had to use a flashlight to light up the area.

93WRX

Uncle Ben
01-21-2003, 12:48 PM
Originally posted by WillieBill
if you care, you can replace the one switch blank by the mirror controls with the coin holder from a non-wrx impreza.

I want this!! Does anyone have a pic of this coin-holder? Part #?