BLITZ OIL SANDWICH ADAPTER

FOR OIL TEMP AND PRESSURE GAUGES!!!

$90.00 SHIPPED!!! PAY BY PAYPAL!!! paypal@advtechsport.com

http://www.advtechsport.com/images/blitz/oil/DSC00349.JPG http://www.advtechsport.com/images/blitz/oil/DSC00350.JPG http://www.advtechsport.com/images/blitz/oil/DSC00352.JPG http://www.advtechsport.com/images/blitz/oil/DSC00353.JPG http://www.advtechsport.com/images/blitz/oil/DSC00354.JPG http://www.advtechsport.com/images/blitz/oil/DSC00356.JPG

Will the sandwich adapter hook up straight up to some Phantom Autometer gauges?

Todd

Ronin2121: From I was told it will work with any aftermarket gauge as long it fits..

Originally posted by Ronin2121
Will the sandwich adapter hook up straight up to some Phantom Autometer gauges?

Todd

I would say that depends on whehter or not the threads are BSPT or NPT....

British Standard Pipe Taper...National pipe taper (i think that's what they mean).

Anyway, the difference is one thread per inch.

I got that 17mm bolt to go into the oil pan, and my VDO sender for oil pressure....took me about forever to get that stuff in becasue I needed a 1/8npt to 1/8 bspt adapter.

That adapter is just about impossible to find. good luck

Thanks for the pics!:cool:

BUMP!!! ASK FOR A QUOTE ON THE NEW BLITZ GAUGES!!!

So what aftermarket gauges will fit? I'm interested in getting one, but I would like to know the thread size/type before I do.

-Bob

Question: Everytime you change your oil and filter, does this adapter just fall out? Do you need to replace the gaskets after a few oil changes? If so, do you sell extra gaskets?

Thank You

TMD

Dave, I assume its like my Greddy adaptor which stays on the car whenever you remove the filter. You can look at it tomorrow.

BUMP!!!

Originally posted by Modified Toys
BUMP!!! ASK FOR A QUOTE ON THE NEW BLITZ GAUGES!!!

PM'd ya

Jon Martin: PM'd you back :D

oil sandwich? gross :disco:
dominic

Wow, no answers to the questions asked?

-Bob

Originally posted by dookiebob
Wow, no answers to the questions asked?

-Bob


Bob. we are waiting for a response from the manufacturer..
Thanks! I will pm you with the answer ;)

Originally posted by Modified Toys



Bob. we are waiting for a response from the manufacturer..
Thanks! I will pm you with the answer ;)

Thanks, I await the answer.

-Bob

I would think that this won't work with Autometers. Autometers are made for American cars which is why their probes won't fit into Subaru threads without adaptors. Basically if the probe won't screw into your Japanese car, then I don't think it will work with the Blitz or Greddy sandwich. I wish it would though. But an adaptor shouldn't be terrible to find. I think Autometer sells them for $8 or so.

So, how low would the filter end up when the WRX alreaddy has an adapter (oil cooler) between the block and the filter?

Leo

Originally posted by Leonardo
So, how low would the filter end up when the WRX alreaddy has an adapter (oil cooler) between the block and the filter?

Leo


Leo.. let's say not much.. probably an inch..

Originally posted by Leonardo
So, how low would the filter end up when the WRX alreaddy has an adapter (oil cooler) between the block and the filter?

Leo


Leo.. let's say not much.. probably an 1/2 inch

So which is it:confused:


:lol:

we'll just call it 3/4 okay;)

sorry.. 1/2 inch :D :D

Vendor, If you have one of these in stock....I would hope.....Stick some bolts in there and see what the threads are. This info should have been provided in the original post. We should not have to hear excuses about waiting for the info from your supplier. I would buy one if the info was in.

You need to answer the responses to your post, you did start it. You should be very specific, and never vauge. It does not give me that warm fuzzy feeling when you guys don't know exactly what you are selling. If it were me I would be measuring some stuff.

Waiting for info.
Rich

I have one of these, and they fit both of my Defi BF gauge senders.....so I imagine they will fit all of Defi's line.


Second, I'm going to ASSUME that they fit blitz gauges ;) Just a hunch though :p

-Mike

Originally posted by Slappie
Vendor, If you have one of these in stock....I would hope.....Stick some bolts in there and see what the threads are. This info should have been provided in the original post. We should not have to hear excuses about waiting for the info from your supplier. I would buy one if the info was in.

You need to answer the responses to your post, you did start it. You should be very specific, and never vauge. It does not give me that warm fuzzy feeling when you guys don't know exactly what you are selling. If it were me I would be measuring some stuff.

Waiting for info.
Rich



Rich.. All they told me that will fit 1/8 probe sizes. As far as i know it fits on defi and blitz gauges.

what about greddy?

where can i get a a sandwich for the greddy guages?

Greddy makes their own, it's only $45-$60 depending where you look.

P/N 2269
1/8" NPT to 1/8" BSPT
"For Adapting Oil Pressure and Temperature Gauges to Most Foreign Cars."

Thanks uncle scotty, If any one is looking for the adaptors, I just ordered mine from Summit.

i guess i can close this thread ?

Hi,

I work in San Jose, and I notice ur shop is in San Jose. Can I just walk in to pick one of those adapters up (do you have em in stock) ? Have u found out if it works on Autometer sender units.

Autometer sender unit thread size are 1/8-27 ..

Thanks...

Originally posted by frisco-WRX-dude
Hi,

I work in San Jose, and I notice ur shop is in San Jose. Can I just walk in to pick one of those adapters up (do you have em in stock) ? Have u found out if it works on Autometer sender units.

Autometer sender unit thread size are 1/8-27 ..

Thanks...


Frisco Dude... From what blitz told me they only work with blitz, defi, hks, greddy, omori gauges..