Hey guys! I would like to introduce my company, Qvelocity. We are custom composites fabricators, and we have developed a few parts for the WRX (gc8 guys, you're next :D ). These are pictures of prototype parts, some are not shown as finished(mounting tabs/holes drilled/5 stage clearcoat). Quality is top notch all carbon fiber. We have a bunch more parts under development and a few we are finishing up...so check back for updates.

http://www.qvelocity.com/Dsc00441.jpg

This is a radiator shroud/cover. $125

http://www.qvelocity.com/Dsc00416.jpg

The battery cover attaches with included brackets. $125

http://www.qvelocity.com/Dsc00413.jpg

The grab handles attach with factory bolts. $75 each

http://www.qvelocity.com/Dsc00404.jpg

This replaces the factory shifter panel, and deletes the cointray/ashtray/lighter, the lighter can be relocated easily. The front of this piece measures about 7x4, perfect for a custom install of a s-afc, auxilliary gauges etc. $200

http://www.qvelocity.com/Dsc00420.jpg

This shifter trim fits perfectly on top of your stock piece. $150

http://www.qvelocity.com/Dsc00444.jpg

This is a gauge pod, that fits in place of the clock panel. It is turned to face the driver. For those who like the factory style pod, we will have pics of our carbon version this week. This can fit 3 52mm or 60mm gauges. $225

http://www.qvelocity.com/Dsc00437.jpg

Sill covers. $150 for fronts, $250 for set of four

http://www.qvelocity.com/Dsc00415.jpg

Fog covers. These are prototypes, we also are making a set with mesh, so you don't have to take them off with to use your fogs. $200

OK, I hope these pictures work ok. We have a bunch more super cool parts (front lip, various engine bay covers, airbox, intake pipe, door panel inserts, reverse hood scoop for fmic guys...etc.), and we will post these up early this week.

GROUP BUY DISCOUNTS...

5%vendor intro discount to nasioc members for duration of group buy.

+5% discount(and free shipping:disco:) for orders placed within the first five days of the group buy.
--additional 10% discount for 5+ buyers of any single part.
--additional 5% discount for 10+ buyers of any part.

This is a little different format from other group buys I have seem, but I think it may help to motivate people "off the fence" to get better prices for everyone.

Thanks for any comments or questions, you can post them here,pm, or email orders@qvelocity.com. We also take paypal to that address. We do accept phone calls at our shop in the mornings, (970) 586-4383, but we are quite busy with new parts, so leave your email. We currently aren't setup for credit cards (very soon though), so we are accepting paypal and money orders.

Thanks for looking,

John and Liz
Qvelocity

Edited

Finally someone who made a angled center gauge pod!

links fixed for pictures, Thanks

I'd be interested in a cf reverse hood scoop!! And some other stuff if I have the money at the time.

Very nice products, I bet you could increase the hight of gauge pod slightly and still leave room for the stock clock underneath or on top of the center gauges.

Kind of like this but a little tighter. What do you think?
__
/ O \
/O - O\

or even
___
/ - \
/OOO\

Sorry I just love having a clock that is easy to read on my dashboard!!

Also, will you be predrilling or providing a mask for the pod?

I want a CF STi V2 front lip!! If you make that I am IN!!!

Oh and CF OEM stlye Sideskirts with molded in OEM strakes!
I WANT them,

and I WANT them ASAP!!

:D

I second everything he just said!!

Originally posted by HiFiWRX
I want a CF STi V2 front lip!! If you make that I am IN!!!

Oh and CF OEM stlye Sideskirts with molded in OEM strakes!
I WANT them,

and I WANT them ASAP!!

:D

Gorgeous stuff, let me know when the GC8 stuff starts rollin out!

Thanks for the replies!
cmaj7-I have relocated my clock to work with this pod, I'll see what I can do about incorporating something into the mold.
HiFi-a v2 lip is on its way for the wagon, as are sills. We can do anything you want on a custom basis.
Rokket-Hopefully we will have some gc8 stuff by next month, and I am trying to confirm whether or not some of the negine bay stuff will fit a classic impreza.
Thanks guys, John

Originally posted by Qvelocity
Thanks for the replies!
...
HiFi-a v2 lip is on its way for the wagon, as are sills. We can do anything you want on a custom basis...

Thanks guys, John Ok well the V2 for a WAGON does me no good :(

Gve me a quote on a V2 lip and sideskirts with molded strakes for a SEDAN! Though I am relatively sure that for a custom order it will be out of my price range...

how about some in red/black or red/grey carbon fiber weave
and also some in blue/black weave to match the stock interior

thanks

Forgot to mention on an earlier question that custom cutting/drilling is included with gauge pods.
lgkahn-we can do specialty hybrid kevlar weaves, but it does increase the price because kevlar is quite difficult to work with.
hifi-I will pm you with a quote
Thanks, John

Originally posted by lgkahn
how about some in red/black or red/grey carbon fiber weave
and also some in blue/black weave to match the stock interior

thanks That would be cool!

I want someone to make the following in a Blue Kevlar/Carbon fiber weave:

STi V2 lip
Stock Side skirts with Strakes
Hood
Trunk lid
S-202 Replica Spoiler
OEM rear underspoiler

If that is all possible I would be in Heaven!! Or maybe Hell (for selling my soul to afford all of that.... :devil: )

It seems that everyone is quite imaginative, I am the same. All of these parts could be made relatively easily, but a commited buyer would be needed. All that stuff would be pricey, but possible. Thanks, John

http://www.qvelocity.com/Dsc00404.jpg

Will this fit on an 02rs automatic? I am intrested in buying one if it does. Or if you would like me to try it out and if it doesn't fit return me the money I would gladly try it out for you.

Looks like you guys are working hard to make stuff for us http://forums.nasioc.com/forums/images/icons/icon14.gif A CF trunk would be nice too, id be intrested in hearing an est on price though...

-neal

the shifter trim looks sweet, are you selling these pieces indivually if the group buy doesn't go through?

HEY!

How about some carbon fiber dash peices - just to replace the parts that are normally silver on the dash. Yes, I know there is a factory CF kit, but is is fake, tacky stuff. I think there would be a market. I would buy it.

Kevin

Doctor Nick: I am not sure of fitment on an auto, I will search and pm you.
Tikler one: Thanks for the compliment,there is no minimum for the group buy, you can order at will!
Red rocket: We might consider the dash trim, but I am not sure if there is one on the market already.
Thanks, John

i LOVE the shift panel.. but i dont know if i can live without that coin tray... :(

Great, we have been waiting for a vendor like you for some time now man. Either the vendor suddenly disappears, stop production or something like that. The carbon fiber parts never never materialise man. Please make this happen.

I would like to see the carbon fiber trim too man! At the moment, I know of no company that makes Real Carbon Fiber Replacement Trims for the car. The closest we get are the carbon fiber overlays, and those do not cover the whole car too man. How about making all the silver portions in Real Carbon Replacement Piece, not overlays.

Also hope to see carbon fiber trims around the speedometer, carbon fiber Defi 60 mm pods ( the current Carbon Fiber one doesn't even fit well ) and carbon fiber I emblems man.

I agree with the previous post man, I like the whole shifter piece, but I do not want to lose the coin tray either man. Can you make one with the option to keep the coin tray?

Thanks man. I hope this time, the production actually takes place!

Jin

Originally posted by DubuRX
I second everything he just said!!


I third everything that is said above:)

Hongkong- we will do a stock sylted one eventually, but I really wanted to come out with some original parts to start.
JIN-Thanks for the good words. The truth is that you guys are the ones that will decide whether or not I hang around as a vendor,if I do not get orders for these parts or custom parts, then my business will go nowhere. I have hundreds of hours invested and thousands of dollars making all of these molds.
There is no minimum order for these parts, and 1 to however many are sold will be ready to ship shortly after the group buy ends. We are a custom producer, but I made all of these parts because I want to put them on my own car, so I am all set to produce. I can make whatever carbon parts you want, but as a custom fabricator I cannot simply make a bunch of new molds without a guaranteed sale. By the time the rest of the products are updated, you will see the 19 unique products available for this group buy. That was quite a bit of work, without a single sale.
So, don't worry about production taking place. All of these parts listed (and our other's on the way) are production ready, and one offs or custom jobs can have a turnaround of a week depending upon the part.

As a side note, we got about 2 feet of snow up here, so our new products won't be up till tomorrow.

Thanks guys ,
John

John, here's a guide on how sellable your items are gonna be. Come out with the parts that we have been repeatedly asking for, and see how many hits and how often your thread stays at the top of the page man.

Have been observing the Nasioc threads for a while and have noticed yours doing really well, considering this is almost like your first day of posting!

Keep it up man, I will be calling you guys soon once you get all the custom parts ready ...

Jin

Thanks for the encouragement, I am going to be posting some stuff around the net to try and get a little more traffic to this thread as well. We have alot of cool parts still to come, and send me a pm if you want a quote on something.
Thanks, John

if you can pull off the impossible P1 lip, people will buy. how about a OEM GDA 3 piece front lip?

h

Moose, there is no problem with making a p1 lip. Impossible to find, or what? What is needed for me to make the part is the lip to make a mold from, and a buyer willing to put up cash for the first lip. I am a custom fabricator, so I can make almost anyhting, but a firm buyer is needed. PM me for a quote. Thanks, John

Originally posted by HiFiWRX
I want a CF STi V2 front lip!! If you make that I am IN!!!

Oh and CF OEM stlye Sideskirts with molded in OEM strakes!
I WANT them,

and I WANT them ASAP!!

:D

everything he said and a carbon fiber gas door for the sedan

and i would really like to see the reverse hood scoop in carbon fiber, i am very interested in that

Originally posted by ryanvancil

I third everything that is said above:)

I 4th it! :D

Hi John,

I understand that your willing to produce what we request??? If so I would like to know if you can make a rear spoiler if I supply the piece for your mold?? Also what about a CF trunk?? If you can do these 2 pieces I will place an order with you!! with 1/2 deposit down. Please let me know.

Oh yeah it would be for a GC8.

Thanks -Tom

evil- I am making a cover for the gas door, and the reverse scoop is on the way, I can't get into the shop here-we have 3+ feet of snow. Pics this weekend.

CVC- Sure I can, we are also looking to do some other carbon parts for gc8. Send an email with pictures of the spoiler, and I can give a quote.

Thanks,
John

Make a front lip for the wagon!!! :)

Mav1c- pics this weekend;)

Please let me know when the gas door will be out and about how much it will be

also how much is the reverse hood scoop in carbon fiber going to be??

Hey John,

what about the Carbon fiber trunk?? Also what do you have planned for the GC8's??? can you share some information about what you have coming out for the GC8's so I can see what else I can't live without. Thanks.-Tom

Evil imports-less than $100 for sure on the gas cover, I will post pics of the reverse scoop tomorrow with revised pricing on everything. Thanks, John

If you can make carbon fiber parts can you make ABS parts?

do a dash kit for under 500 and i will buy one with no thoughts.

asn-no abs parts
Highway drifter-we can't make too many new molds without firm orders, but if you pay $500 I will make it with no thoughts.
Thanks, John

Originally posted by Qvelocity
Evil imports-less than $100 for sure on the gas cover, I will post pics of the reverse scoop tomorrow with revised pricing on everything. Thanks, John

Thanks for making a reverse scoop. I've been looking for a better solution than the Aqua vent. :D

The REAL V2 lip is split into two pieces and has a small STi decal thing in the center...

If we could get a CF version 2 lip made in 1 piece (like the Ver 1 lip) I would buy it, NO QUESTION... I know a couple other people that would too!

In fact click here and let Qvelocity know if you are intersted!!

http://forums.nasioc.com/forums/showthread.php?s=&threadid=333929

:D

John,

Im really interested in a reverse hood for my rex. I really like the Kaminari hood, but would love to also be able to have a CF Sti scoop too. Just like the rally hoods. I have been able to find a fiber glass one through Procarparts I think. I am also located in Aurora and am interested in visiting your shop with my check book. Let me know what you think.

Maybe we can workout some type of sponsorship so the guys around here can see you work first hand.

Todd
:D

What about a Carbon Fiber drive shaft?

Atf78- pics tomorrow of the reverse scoop.
hifi-thanks for the link, we can do an sti lip, but we need an original to start with.
Ronin- we are setting up out new shop in Denver next month, keep in touch.
Ver7- We are sticking to dressup/mild performance(these will be up soon also) items for now. CF driveshafts would be better sourced through someone who works with drivetrain stuff.

Thanks, check back tomorrow, we finally dug out our shop, so we'll have some cool pics on sunday, John

Originally posted by CVC THIS
Hi John,

I understand that your willing to produce what we request??? If so I would like to know if you can make a rear spoiler if I supply the piece for your mold?? Also what about a CF trunk?? If you can do these 2 pieces I will place an order with you!! with 1/2 deposit down. Please let me know.

Oh yeah it would be for a GC8.

Thanks -Tom

yea...how much are we looking at for a trunk?...thanks...

jeremy...

im in for when you get Gc8 stuff !!!

As I said before, we would like to make gc8 stuff, but we need firm orders, and people to provide parts to make molds from. We don't own a gc8 to make do this. If you wants parts it is not as simple as saying so, you have to place an order for it before we can do anything custom. Thanks, John

Hey John,

question about the spoiler center. My question is I'm suppose to be getting the spoiler back from the paint shop tomorrow, and I was just wondering if your going to epoxy the piece on, how will the edges be done?? Or will I just have a CF center piece with a ridge all the way around??

Can you share some thoughts with me? I WILL have it done, but I would just like some assurance about how it will turn out.

Thanks -Tom

Hey John,

question about the spoiler center. My question is I'm suppose to be getting the spoiler back from the paint shop tomorrow, and I was just wondering if your going to epoxy the piece on, how will the edges be done?? Or will I just have a CF center piece with a ridge all the way around??

Can you share some thoughts with me? I WILL have it done, but I would just like some assurance about how it will turn out.

Thanks -Tom

tom-pmed you. Thanks, John

John,
thats for the quick pm response. I would also be willing to meet face to face and talk some business and I would still love to check out your facilities. You could have a chance to see my baby in person.

Todd

Todd, totally, the new place is going to be totally setup in few weeks, while we get it ready for our next production run. I'll be down in Denver alot this week though-pm me with your schedule. Thanks, John

John,
how's the new hood coming and the pics. I really want to see the pic of all your products. I know we spoke a bunch back and forth, but think I could really use some of your products on my baby. Would be nice to have some pieces to show off at the April 12th show in Boulder. Let me know how things are going.

Todd

Ronin-Thanks for hanging in there. We are really busy switching shops right now, but we've got a bunch of new parts sitting here striking a pose. I will have to post them via imagestation saturday, because my web gal is out of town. I just met with Bret and Troy today. They were very cool, and I am hoping to get some parts for gc8s at the show. I will be at the autocross if you want to chat, in a blue svt focus though the wrx is hoodless and awaiting its new turbo system (if I can pull it off I guarantee no-one at the show will have anything like it). I'll email you some carbon pics tomorrow though, I'd love to see another person with my carbon stuff at the show. Thanks, John

MANY thumbs up for these CF parts! This is my first time seeing this thread, and though I haven't read through it--and apologize if this has been said already--I'm anxious to see what GC parts you come up with. :)

I'm personally mostly interested in shifter trim/interior stuff, though maybe a belt/battery cover would be cool, too. I was going to get the factory, fake CF stuff for my dash and shifter since SoA has a sale on it now, and still might (no offense to you guys, I know the real CF is nicer but I'm on a budget!!), but....

...Well, let's just see what comes out. :D

-S2-

any chance you guys can make a fiberglass skidplate? i know it's not carbon fiber, but i figure you guys can make the mold and just use different materials. i asked a machine shop for a quote and they said $100 in welding plus materials for a 3/16" aluminum one. i'm about to attempt to make this on my own, but figured i'd run it by you guys to see how much something like this would cost. approx 29" wide, 28" long with a lip on the front and a taper towards the rear, to cover a bit further back from the jacking plate behind the oil pan.

I would LOVE a carbon fiber trunk lid for a GC8. Ive been looking for one forever. I know its not gonna be cheap.. but I have no problem paying for it as long as its a sweet piece. Thanks.

Rich

Tdx- I think our skidplate would be more expensive because we wold have to make a mold for it. Aluminum might be a better material for that application anyway.
Whiplash-pm me for a quote, once I get a firm order for a gc8 trunk I will get started. Thanks

bump

Thanks for the bump Highway drifter, we have been busy moving our shop, so I have a few new parts to post up here, will do so this weekend. Thanks, John

Originally posted by Qvelocity
I will be at the autocross if you want to chat, in a blue svt focus
Do you happen to also make parts for the SVT Focus? :D

One thing I know a lot of us that actually track our cars would love to see would be a front brake cooling duct fed from the removed fog lights holes. But I do realize that might be a little difficult. But if someone built one, I'd be on it like white on rice... :)

:D Please tell me that you're gonna make some stuff for us Legacy guys, I'm sure if you post in the Legacy forum there would be plenty of people interested.........just for thought :D

-- Manny :devil:

If you can make the gauge surround that holds 2 gauges in it (like the autometer one that probably will never come out), I can have 5-6 of them sold right away. There are a bunch of us waiting for the autometer surround to come out, but it is always being delayed. I would rather have a cf version, and you can get them done before autometer.

Russ

John,

Are you planning on making the trek to the Flatirons meet/show this Sat (12th), then maybe a run down to Bandimere? Would like to finally meet face-to-face and see about some products. :D

The pics I sent to are now pretty old (mod wise). Exterior wise, I now have a Greddy front lip and C-West side skirts/door caps, Genome STi grill, STi trunk emblem, Cherry colored WRX trunk emblems,and an Erebuni rear wing.

Hope to see you next Saturday,
Todd

Bump
Need reverse scoop for FMIC-What's the status?

Delicious, we have gotten backed up with custom orders. The scoop is on its way though, I'll give you a pm with pics. Thanks, John

V2 front lip!!!

Just a reminder ;)

( The grab handles attach with factory bolts. $75 each )

Hey, just wanna check what the grab handle is for? Is it for the battery cover too?

How about making a carbon fiber version of the air intake piece that sits facing the grill ( the one that looks like a flattened horn ). I know AVO makes one, but I don't wanna brand on my carbon fiber. Anyway, they are also charging ridiculously for it.

Jin

Jin, the grab handles are for the inside of the car on the headliner, where your passenger grabs when you are turning, also know as the "oh sh.. handles"
I am doing an airintake like that, I'm not sure how much avo charges though.
Hifi- We can totally do a v2 lip, but we need to pre-sell them to pay for the mold.
Thanks, John

Originally posted by Qvelocity
Hifi- We can totally do a v2 lip, but we need to pre-sell them to pay for the mold.
Thanks, John So lets get it going!! :D I am ready... How many do you need to "pre-sell"?

I am VERY impressed with the photos/quality of your fabrications. I think you mentioned a mold for Carbon Fiber Front Lip. I have been looking around a bit & located a C-West Style CF Lip for around $350. Do you have any CF Lips for sale? If so send me a pic and i will be your 1st GB customer!!!
Thanks Alot.
Sean Campbell
SeanyC25@aol.com

Would love it if you guys could do this with a reasonable price. PM or email me if you have this available or soon will. Thanks, Scott

if u could let me know if these are dry composit molds

I am defiently in on a V2 spoiler when you get the mold built! I am also pushing for the other CF dealer/fabricator on here (NASIOC) to work on getting the V2 going as well so Maybe that can be some "motivation" for you to find one to use as a mold!!! ;) there is already a good indication that people want it...

http://forums.nasioc.com/forums/showthread.php?s=&postid=3705735#post3705735

Take a look...

:D

im in for a MY00 RS trunk pre-drilled for the lock, hinges and stock spoiler. how much for this? (plz post a quote so we can stop asking :D) expected weight? will you be keeping the framework of it or just make a "sheet" style? thnx

Zoink-I have replied to other's responses and quoted 700 for a trunk, or 625 for one with a race finish(not clearcoated but still shiny) The "framework" will be integrated into the trunk, no seperate fiberglass junk, all cf. I can find a trunk locally, I just need someone to place a pre-order so I can start on a mold. Thanks

and the pre-drilling? how long will it take to get this done? and out the door? what are you able to do to help assure me that im not going to get screwed on this deal (no offense but, as a new vendor, i'd like to hear some things from people whom you've dealt with on the boards). and you've got a PM :D

zoink, pmed you.

I've been looking all over for some quality CF with mesh (not solid) foglight covers. Are these a definite thing, or is it still in development? If the price is reasonable I'd be willing to place an order if you need that to make a mold :)

So by pre-order do you mean deposit? Or full payment up front? And how long would it take to get made?

Rich

What is going on with my radiator shroud??? It's been over a month since I paid and still have not seen it. Could you please contact me back with a tracking number or something??

Gldnchild, Did you buy the shroud on the group buy? We have not finished the GB , so orders have not shipped yet. Thanks

Any pics and price of the reverse hood scoop? I really need one to vent heat from my STI motor:devil:
thanks
-nick

8k, we will have some pics of the our reverse gc8 scoop, as soon as I meet up with a local guy who ordered one. That'll give you an idea of looks etc. Thanks, John

Sweeet! You already made a reverse scoop for the gc8!?!? oh man! I've been wanting to get one of these. How much is that gonna run? I need to start saving up for one of these.

folklorez- I'll send some pictures:)

did you ever find out if that one part fits for an automatic trans mission also. The part I questioned in the first page?

Id like to see some pics of the hood scoop as well. As soon as I see the quality of the stuff.. Ill give you a deposit on that trunk lid. :D

how long before you will have photos of the rev hood scoop????????? still waiting 4 um. steve. {pm me if u have:cool: }

Sorry for the late replies, super busy in the shop:o
Dr. Nick- It will fit, but may need some sanding etc. to be perfect, I will try on a local car.
Hood scoop...we are still working out some fit/finish issues, but this thing is going to be pretty beefy when we're done with it.
Thanks

:D great! please let me know when it's done;) pm me or at stevesparts@earthlink.net thanxs, steve.

I would be interested in a Zerosports replica splitter made entirely of carbon fiber, if that's possible. Right now I'm still using the WRX intercooler but might upgrade to an STi-sized unit in the future. Would it be possible to build a splitter that features a removable adapter that allows one splitter to fit both intercoolers? Hopefully something that fits better to the interior contours of the WRX hood than the typical Zerosports replicas.

--
0==WW==0
"…axles of evil…" - george w. bush

Originally posted by Qvelocity
Thanks for the replies!
cmaj7-I have relocated my clock to work with this pod, I'll see what I can do about incorporating something into the mold.
HiFi-a v2 lip is on its way for the wagon, as are sills. We can do anything you want on a custom basis.
Rokket-Hopefully we will have some gc8 stuff by next month, and I am trying to confirm whether or not some of the negine bay stuff will fit a classic impreza.
Thanks guys, John

YAYYY!!! v2 CF lip for us WAGONeers!!!

I'm in NEED of a CF P1 replica lip!

Some people have offered them and several people want them, but it's always the same old story;

The thread dies away and the thread starter seeps into the vapors. NO LIPS.

WE NEED A CF P1 LIP for GC8! Please help!
awd_impreza_sti@yahoo.com



make it make it make it make it make it make it

Andrew-If you NEED a lip, then you have to be able to commit to buying one or getting some people to prepay for one. The process of making molds is very expensive. I need someone who already has a lip to mold from, and we can start from there. Thanks

Ya know if I buy a lip, why would I make another? I could see several people going in on a lip to have a mold made, but what do we get out of that. Do we have to pay full price for the C/F version? Some type of arrangement would be expected as your company can then produce and sell from that mold. Just my 2 cents.;)

Qvelocity: "Getting" people to buy somthing on an online forum I don't know how to do. I don't know anyone with one for a mold donor.

I could and would pay you today if the product was available, and I believe many others would as well. You must know if 10 or 20 P1 lips were made, they would not just sit around; people would fight over the right to buy one.

HEY WHATS UP? HAVE YOU CONSIDERED MAKING A BOOST SOLENOID COVER AND AN ALTERNATOR COVER. I WOULD BE INTRESTED IN THESE , AS I AM SURE MANY WOULD.

Originally posted by imprezive1
Ya know if I buy a lip, why would I make another? I could see several people going in on a lip to have a mold made, but what do we get out of that. Do we have to pay full price for the C/F version? Some type of arrangement would be expected as your company can then produce and sell from that mold. Just my 2 cents.;)

What he said. You could make bank on these if YOU, the vendor commit.

If you buy a fiberglass lip, make 20 CF copies, and sell them for the sweet price of $300 shipped, thet would bring you $6,000.

Isn't $6,000 minus costs motivating? :confused:

Not to be a PITA but any pics of the reversed scoop. I would like one of these but I need to see the probuct before I can commit.
thanks
-nick

Imprezive/Andrew-Thanks for the persuasive arguments. The truth is that I am quite busy with custom work, but as soon as I slow down a bit I will have some time to do molds. Anybody who put up their own p1 lip would get a deal on a carbon lip. Although I am a vendor, I am also the manufacturer so I have got to take care of current orders first.
Redline8k-We are finishing up this mold, expect pics next week. Thanks

QVelocity,

Did I read it right? You are in the process of making a V2 lip for wagons???

See, I asked OE Tuning if they can make a wagon lip. They wanted several people to sign up and begin production. I have started a thread under "Dress-up and Style" asking who wants a wagon lip. Now, whoever comes out with this lip first (QVelocity or OE Tuning) will get our (wagon owners) business.

a V2 lipfor the wagon!? when would this be coming out?
and how much would it be?
would you guys make a non-c/f lip or just c/f
either way, i'd be interested..very :D

I just want to chime in and join the lobby for an STi v2 lip for the wagon. I have had money set aside for a lip for months. Please come through with this!

-Chris

how much for the wagon CF lip ?

How much for some carbon fiber with a blue weave in them for Morettes, 02-03 WRX. I bet alot of people would love that, I know I would. If the price is right I am all over this.

I'm interested also on the 02 wagon lip and for rear if possible. How much for cf and non-cf?

hey.. those of you interested in a wagon lip, sign in on this thread, we're trying to gauge interest for any vendors interested in making a lip for us.
Click Here (http://forums.nasioc.com/forums/showthread.php?s=&threadid=353994)

alright, I'm gonna add mrazntre and bdel-WRX for the WAGON lip list

OK guys, sorry for the late response, we are getting our new shop setup after about a month of being in between.
We have started on a v2 style lip for the wagon, pics by next week, as well as some other wagon specific cf parts (VERY cool stuff, no hints though) I would like to do a rear lower lip, so if someone has an oem piece I could cut you a deal to use your's for a mold. Thanks

OUTSTANDING Qvelocity!!! We'll be waiting!

No hints? how about a 3-gauge a-pillar pod? :cool:

Originally posted by WR xplosive
alright, I'm gonna add mrazntre and bdel-WRX for the WAGON lip list

whoa. instant sign up!.... coo coo...

depends on the $$ tho....

hahaha, mrazntre

dont worry man, it should cost as that much...hopefully :D

Originally posted by WR xplosive
hahaha, mrazntre

dont worry man, it should cost as that much...hopefully :D

so basically you're tellling me i should... bend over now or later?

Originally posted by Qvelocity
OK guys, sorry for the late response, we are getting our new shop setup after about a month of being in between.
We have started on a v2 style lip for the wagon, pics by next week, as well as some other wagon specific cf parts (VERY cool stuff, no hints though) I would like to do a rear lower lip, so if someone has an oem piece I could cut you a deal to use your's for a mold. Thanks


i sent you an email.....

Qvelocity,

Were you able to mold the oem rear lip for wagon? Also, I do wish that the front lip for wagon would be a 1 piece. I'm also interested on a 3gauge-pod A pillar in cf though i'd definitely paint em to match.

Thanks.

Originally posted by mrazntre



i sent you an email.....


no reply from the vendor yet.

Originally posted by mrazntre



no reply from the vendor yet.

may be that's a good thing??? they're busy workin on the lip hopefully....:disco:

Ok, we are quite busy in out new shop, as we had alot of parts back-ordered that needed to go out. If there is anyone who did not get a response from us on orders, please pm me so we can get your order out asap.
The wagon lip is a little delayed, but I should have that and a bunch of other pictures (gc8 reverse scoop, skirts, wagon spoiler and a few other things) on monday or so. Thanks, John

any word on those pics of the scoop yet?
-nick

me to on pic's of rev. hood scoop.....still waiting.....:p or will u make a c/f hood with no scoop at all????? i'd like to know if u can/will do one{:cool: } email me on this at stevesparts@earthlink.net thanxs. steve:)

Does anyone have pics of any of these parts installed yet? I'd be especially interested in seeing what the gauge pod looks like on the dash. Thanks in advance.

Originally posted by Qvelocity
As I said before, we would like to make gc8 stuff, but we need firm orders, and people to provide parts to make molds from. We don't own a gc8 to make do this. If you wants parts it is not as simple as saying so, you have to place an order for it before we can do anything custom. Thanks, John

What if I supply you with a GC8 Stock Gauge Pod and you can make a Defi look one to fit 52mm and 60mm Gauges.

You will have the stock fit and all you would need to to somehow make the three rings for the gauges instead of the flat look.

Is that doable?

Thanks,
Kevin

Originally posted by Qvelocity
As I said before, we would like to make gc8 stuff, but we need firm orders, and people to provide parts to make molds from. We don't own a gc8 to make do this. If you wants parts it is not as simple as saying so, you have to place an order for it before we can do anything custom. Thanks, John

What if I supply you with a GC8 Stock Gauge Pod and you can make a Defi look one to fit 52mm and 60mm Gauges.

You will have the stock fit and all you would need to to somehow make the three rings for the gauges instead of the flat look.

Is that doable?

Thanks,
Kevin

Dear Qvelocity,

Can you guys make a full carbon fiber WRC Hood ( with the big air dam in front of the hood and a bigger hood scoop ) like the ones the real WRC Cars have? I know that PKZero was making one, but they just suddenly disappeared. As of now, I know nobody that is doing any. Can you guys do one up? Its for a 03 WRX.

http://www.subarureview.com/showreview.php?id=759

Something like that? Any price estimates?

Thanks a million.

Jin

A couple of things...

I have heard this horrid rumor that CF has a tendency to crack in extreme cold, but I am itching to get a decklid and hood on my GC8. So has anyone else had any CF crack due to the cold.

And when are we going to get some pics of the GC8 parts?

Well, my CF deck lid hasn't cracked. I think it went down to 0 last winter and my car was sitting outside unprotected.
don't know abou below 0.



Anyway,
Qvelocity,
If you make a GC8 carbon center guage pod or anything else for the GC8s please e-mail me with picks and price.

wighti1@aol.com
thanks

u guys still making the c/f wagon lip?

Just a warning for you guys on this board:

QVELOCITY IS A SCAM. THE OWNER JON MCDONALD, OF BOULDER, COLORADO IS A THIEF.

Check out the sticky thread on the Rocky Mountain section. I'm the only one who has posted, but I know of a handful of people who have been ripped off. Don't expect anything from this guy, and most of all DON'T SEND HIM ANY MONEY.

agreed. i sent them money for the CF shifter trim and never got it and now they've stopped replying to my emails.

**** YOU QVELOCITY!!!!!!!!

agreed. i sent them money for the CF shifter trim and never got it and now they've stopped replying to my emails.

Well that really sucks! :(

Come to think of it, I once asked him to make something but he insisted that I pay him first before he can go and start "making a mold." Glad I didn't pay...

Here we go again, another scammer sack of *****.
These people all need to be put against a wall and shot.:mad:

Yeah. I was told the same about needing a deposit to start a mold for a trunk lid for a gc8. Its getting to a point where Im scared to buy anything anymore from new vendors that come on here. I hate seeing people getting ripped off by some scamming douchebag. And I cant believe how close I was to giving that deposit to him. :rolleyes: I hope this ass gets nailed.

Is there an STI spoiler on the way? I would love A carbon fiber STI spoiler.

BEN:disco:

Originally posted by bbbwrx
Is there an STI spoiler on the way? I would love A carbon fiber STI spoiler.

BEN:disco:

Read above man, this thread is a SCAM.

sorry man I got to page 3 and was lazy so just posted from there. Thanks for the info man. I hope this jerk didn't get alot of people.

looking for CF side markers and hood scoop for 03 WRX, wondering what it would take for you to make these two parts for me.

Thanks

Grant

Originally posted by gkauno
looking for CF side markers and hood scoop for 03 WRX, wondering what it would take for you to make these two parts for me.

Thanks

Grant :huh: :huh: :huh: :huh: :huh: :huh: :huh: :huh:

its as if the people on this board are retarded chimps


read 4 posts up from yours man. this is a scam

Originally posted by D-I-Z-Z-L-E
:huh: :huh: :huh: :huh: :huh: :huh: :huh: :huh:

its as if the people on this board are retarded chimps


read 4 posts up from yours man. this is a scam

HAHAAHAHAHAH



It's funny too because those two items already exist....
Am I missing something ?:confused:

sense > you

try to make it like

sense = you

Anythign at all for MY01 RS?

Eugene

Originally posted by D-I-Z-Z-L-E


its as if the people on this board are retarded chimps


read 4 posts up from yours man. this is a scam


Hahahahaha. Too damn funny.

And I totally agree. I give a big :huh: to anyone still responding and asking for parts. Heh.

Some bonehead might actually still send this PO human S money.
Why isn't this thread locked away in scamalert detention?


Hello??? LEO??? Put this thread to bed!

Originally posted by OKRS25
A couple of things...

I have heard this horrid rumor that CF has a tendency to crack in extreme cold, but I am itching to get a decklid and hood on my GC8. So has anyone else had any CF crack due to the cold.


A lot of my hockey sticks are made of reinforced CF and my others are CF/Kevlar...don't see why the cold temps would be an issue unless you smash it with a hammer and spray it with N02...lol. But who knows! :confused: I'd like to see pics if this ever REALLY happened!

***SCAM***?! That sucks...

WRX34

Well I actually dealt with him through ebay/pay-pal.. and the items did arrive (console, door trims, shroud and battery cover).. But all but one of them was in my opinion un-acceptable.. just a piss poor job at best.. he then later said he had to rush and would send me non-prototype pieces as soon as he got a chance.. think that was 3-4 months ago.. I think the guy got in over his head.. probably didnt start out as a scam.. still I hope those who paid with paypal used insurance or didnt wait too long.. that's horrible.. As a matter a fact (as it was awhile ago).. I think as the 30 days for paypal came close I warned him I would cancel the order as I was no longer protected via paypal.. they arrived in about 3 days after that (took 3 weeks)

nathan

console, door trims, shroud and battery cover

CF pieces to replace OEM ones. And do nothing. But be CF.
It must be nice to be you! :)

do you have carbon fiber fog covers for the 04-05's? if so pm me pics and price

do you have carbon fiber fog covers for the 04-05's? if so pm me pics and price
are you kidding me, did you not read this is a scam????

5 year bump, rofl.

Lomg!!!!!!!!!!!!!11

subscribing

^5 years too late...

Holy crap. ha ha ha ooops.

I cant see the pics!!!:sadbanana:

I cant see the pics!!!:sadbanana:
ITs because this thread is as old as your car. Sorry for resurecting an old thread.

jesus even the people that have been around for a while are acting like newbs

jesus even the people that have been around for a while are acting like newbs

That sounded intelligent.