We now have the '97+ Impreza Speed Bleeders (SB7100's) in 303 stainless steel.

Speed Bleeders make brake bleeding a snap. No complicated procedures or help from a second person needed. I have been using these on my rex for a while and I can't imagine going back to the old method now.


Speed Bleeders, Stainless Steel, Set (4) (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SB7100SS&Category_Code=1994) - $52 Free Shipping! - Fits '97-'03 Imprezas
Speed Bleeders, Set (4) (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SB7100-Set&Category_Code=1994) - $28Free Shipping! - Fits '97-'03 Imprezas
Speed Bleeders, Set (4) (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SB1010&Category_Code=2457) - $28 Free Shipping! - Fits '93-'96 Imprezas & Stoptech calipers
Speed Bleeders, Set (4) (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SB1428&Category_Code=1994) - $28 Free Shipping! - Fits Wilwood calipers

We also have a few brake combos
Speed Bleeder / Goodridge Hose Combo, '02+ WRX (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=GRSB-Combo&Category_Code=900) - $120 Free Shipping!
Speed Bleeder / Goodridge Hose / Hawk HPS Front Pads Combo, '02 WRX (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=GRHPSBCOMBO&Category_Code=900) - $197 Free Shipping!

http://www.oakos.com/Merchant2/graphics/00000001/SB7100SS.jpg
http://www.oakos.com/Merchant2/graphics/00000001/SpeedBleeder.gif
http://www.oakos.com/Merchant2/graphics/00000001/SB7100.jpg

We offer secure online ordering on our website (http://www.oakos.com). Visa, Mastercard, and AMEX accepted. We also accept Paypal.

99% of the orders placed before 3PM EST M-F are shipped the same day!

Sincerely,
David Kearney
Oakos Automotive
www.oakos.com
sales@oakos.com
Tel: 248.969.2207
Fax: 248.969.4950

I'll bite on this, I lost a couple of the OE dust caps and that seems like a good idea to pick these suckers up.

lstepnio,
Thanks a lot for your order! I'll be sending your Speed Bleeders out in a couple of hours and I'll send you a shipment confirmation email afterward to let you know that they have been shipped. :)

-Dave

Originally posted by Oakos Automotive


Speed Bleeders, Set (4) (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SB1428&Category_Code=1994) - $28 Free Shipping! - Fits Wilwood calipers



You're evil Dave!
We'll talk at the wednesday meet :D

Joe, my satanic evil powers tell me you have some Wilwoods in your future. I'll see you Wednesday! :D

:devil: <= Dave

Can you show what it looks like installed?

which ones fit the OEM Subaru 4pots?

They look pretty much identical to the OE bleeder screws.


Here is the Speed Bleeder in the caliper:
http://www.oakos.com/wrx/gallery/IMG_4155.JPG

Here is the Speed Bleeder in use:
http://www.oakos.com/wrx/gallery/IMG_4157.JPG


-Dave

Originally posted by HS WRB-rex
which ones fit the OEM Subaru 4pots?

I believe that the 4 pots use the same size screws as the '97+ Imprezas. The easiest way to tell for sure is to see what size wrench fits on the bleeder screw. If it is a 8mm wrench then they should be the same.

-Dave

Originally posted by Oakos Automotive
Joe, my satanic evil powers tell me you have some Wilwoods in your future. I'll see you Wednesday! :D

:devil: <= Dave

hrmmm - maybe?
http://www.freebmw.net/safir/My%20Subaru/Perrin_Wilwood/lowres/Kit%20001.jpg

Very nice! Those will look really nice behind your P1's. :)

-Dave

So the ones that are not SS, what is it made out of?

Originally posted by bemani
So the ones that are not SS, what is it made out of? I have the same Q appears to be brass maybe or aluminized steel.

The non-SS Speed Bleeders are made from 12L14 carbon steel. They will hold up just fine under adverse conditions (salty roads, etc.), I think the SS is more for looks but I had a few requests for them so I ordered some. Also, they all come with rubber caps that help to keep the top section insulated from the elements.

http://forums.nasioc.com/forums/attachment.php?s=&postid=2588399

-Dave

free bump....i got two set of these from him...works great, plus it was delivered way quicker then i expected

vile, thanks for the bump and for the testimonial. I am also glad to hear that I beat your expectations as far as delivery time was concerned. :)

-Dave

Best $30 mods around, takes me 5 minutes to bleed the brakes.

cmaj7, thanks for your input. :)

-Dave

I still have over a hundred of these available! :)

-Dave

How long until you get the SS brake lines in for the WRX?

"Next week" is what I have been getting on the SS hoses for over a month now. I will be calling them in a little while so hopefully I will get an updated ETA here pretty quick. I will post any updates.

-Dave

I just got word that the SS brake hoses are inbound, finally! :)

They will hopefully be here by the end of the week.

-Dave

How much for a SS hose and bleeder combo? Also, do you have the m/c bracket?

The SS hose / Speed Bleeder combo is $120 w/ free shipping. Sorry, we don't carry the MC braces.

Goodridge Hoses / Speed Bleeder Combo
http://www.oakos.com/Merchant2/graphics/00000001/GRSBCombo.JPG (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=GRSB-Combo&Category_Code=900)

-Dave

Heard anything on the lines yet?

It's funny you should ask. The UPS guy just dropped them off a few minutes ago.

-Dave

Just ordered 'em :)

Thanks a lot for your order. I will send you your shipment confirmation email in a few hours to let you know that they have been shipped. :)

-Dave

Everyone who has ordered the Goodridge hoses or Speed Bleeders last night and today should have a shipment confirmation email from me. Thanks! :)

-Dave

I also just ordered the SS hose / Speed Bleeder combo

Alan

Allan,
Thanks a lot for your order! I will have your hoses and bleeders packed up and shipped out in about an hour. Expect to see a shipment confirmation email within an hour or two. :)

-Dave

UPS just dropped my brake lines and speed bleeder! Thanks a lot!

You are very welcome! :)

-Dave

What about the lines/speed bleeders combo for the GC?

Jonathan,
We do have the Speed Bleeders for the GC cars but no brake hoses yet. Sorry.

-Dave

Dave,
Do the Speed Bleeders fit StopTech calipers?

I don't know which bleeders fit the Stoptech calipers yet. I am working finding out the correct size. Thanks.

-Dave

It has been confirmed, the SB1010 Speed Bleeders (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SB1010&Category_Code=2457) are the correct size for the Stoptech calipers.

-Dave

Dave,

Do you still have the lines and bleeders available?

Yes, the Speed Bleeder / Goodridge Hose combos are still available. I added the combos to the original post in this thread. We are running low on the hoses but I am hoping to get more soon. Thanks! :)

-Dave

Dave check your pms :)

Ken, I PM'ed you back.
:)

-Dave

I have Stoptech BBK fronts and OEM WRX rears. Dave has a package for this application. Six bleed screws! (4 of one size, 2 of another) Saves having to purchase two kits. Awesome attention to detail!

http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SBST40&Category_Code=900

Happy Motoring :D

Just put my SS hoses and bleaders on! Not issues, and bleeding was a SNAP!

Dave

Sweet, I'm ordering in the morning, keep a set aside for me :D

Thank Ken! I will let you know later today when your Speed Bleeders have been shipped.

cavymeister, I'm glad to hear that you got the hoses and Speed Bleeders on. After using the Speed Bleeders it's hard to imagine going back to the old method isn't it? :)

digitaltekniq, Sounds good. I'll keep my eye out for your order.


Thanks! :)

-Dave

Dave,

Ordered the combo and some Denso IK22 ;)

Cheers!

Rich

Rich,
Thanks a lot for your order! You should have a shipment confirmation email and tracking number from me in your email. :)

-Dave

:cool:
Dave,

Got your email. Don't forget to ship my kartboy shifter today.
Speed bleeders will be arriving tomorrow (according to UPS). Thanks for quick shipping.

Greg

Greg,
Your shifter and bushings are packed up and will be dropped off here in a few minutes. They are going UPS 2nd Day Air so you will get them soon. I will email you a tracking number soon. :)

-Dave

:D Dave,

Got the tracking number for the shifter.
You guys are good. It's almost too good to be true.

Greg

:D Thanks a lot Greg!

-Dave

Dave,

I just P.Mailed ya for the speed bleeders.

I bought lines last fri. and being from Kintuky my dum arse didnt even think about gettin em!!!:o


Thanks

Shotgun/Billy

Billy, I PM'ed you back! :)

-Dave

Dave,

I just placed an order for the SS bleeders. :D Great doing business with you again!

Neil.

Thanks a lot for placing another order with us Neil! Your Speed Bleeders will be sent out in about four hours. Like usual, I will send you an email to let you know that they are on their way. :)

-Dave

Do you have any of the $28 non stainless steel bleeders for an '02 Impreza, in stock?

Jim

Jim,
They are currently sold out. I have 80 more pairs on the way and there is a possibility that they will get here today. I will post a notice here as soon as they are available again. :)

-Dave

The non-stainless Speed Bleeders are now back in stock.

-Dave

just placed order for bleeders:)

LEOSPEED,
Thanks a lot for your order! I'll send you a shipment confirmation email tomorrow to let you know when they have been shipped. :)

-Dave

I just recieved my speed bleeders. perfect timing since my Stoptech Stage 2 also arrived today. Now to get it all installed.

Matt...

Do you have a link with details and directions on these? How much is a set for the StopTech BBK and stock rears and when will they be available? Thanks.

would anyone care to post directions on how to use these. I am going to be installing new pads soon and might do the lines and fluid too. but I have no experience with bleeding the brakes, maybe these will make it easier, but still need directions.

Doesn't get any easier:

Once you get your Speed Bleeder®, it is very simple to install:

Simply clean the area around the old bleeder screw so that no dirt or contaminants can get into the brake system. (use brake cleaner)
Remove the old bleeder screw and discard.
Screw in the Speed Bleeder® into the wheel cylinder or caliper until it seats.

Unscrew the Speed Bleeder® 1/4 to 1/2 turn. (put tube on the bleeder leading into an empty container)

Here comes the magical part. Slowly pump the brake pedal approximately 4-5 times. (You do not have to close the bleeder screw between pumps.) A one way check valve lets the air and fluid out when the pedal is pressed and closes between pumps preventing new air from reentering the system between pumps.

After bubble-free fluid comes out of the Speed Bleeder® screw, close the Speed Bleeder® until it seats.

Proceed to the next wheel cylinder or caliper until all are bled.

Just put AP Racing 4 pot calipers on the front and SS hoses all around and bought stainless speed bleeders for them and my stock rears. They worked beautifully flushed the entire system on them. My brakes have never been bled so well, I was concerned about possible air leaking back - brakes are rock solid.

WRX is RF, LR, LF, RR bleed order.

Bump for a good vendor as well.

Thanks, how do you know when you're done with each corner? After a certain amount of fluid is put in or just when the bubbles stop? What if there wasn't any air in the system, then no bubbles right?

With two people you can just have someone watch the tube and give it two or three more good pumps for good measure after seeing no bubbles. Make sure you pump them slow and steady and in full strokes all the way to the floor and back.

By myself I usually have fluid in the container with the end of the tube submerged. When I bleed I usually give it five good pumps by then the hose should be primed and filled with fluid, I then set the hose up so there is a curve a good 6 inches above the bleeder. I give it one good pump and see if there is any air in the raised part. If there isn't any I give two or three pumps, close it off and move to the next one.

Now, I admit I use more fluid than some on my bleeds but I don't mind replacing a good deal of fluid that is closest to the heat and abuse it takes in and near the caliper.

This is just my way with them - besides once you open the brake fluid you can't store any that you have left. It pulls water from the air while in storage and ruins it. So buy the small bottles and might as well use at least a whole bottle.

tazman976, I'm glad the timing worked out just right for ya.

garface, we have a set for WRX's running the StopTech BBK. Here is a link to it on the website: Speed Bleeder, Set (6) - StopTech Calipers (http://www.oakos.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=355&Product_Code=SBST40). It includes (4) bleeders for the ST-40 StopTech front calipers and (2) for the stock rear calipers. The price for it is $42 shipped.

KanosWRX, jehcpa pretty much summed up the install. If you have any other questions please feel free to ask.

jehcpa, thanks a lot for all your input! You saved me a good bit of work. :D


-Dave

Dave.
I ordered a two sets of these speed bleeders for my 98 RS. I used an 8mm wrench for the front ones. But the rears, Needed a 10mm. The speed bleeder was just too small to fit the rears. Do you know of a difference between the brake systems on the various years of RS 2.5's?

Mitch,
I am very sorry to hear that you had trouble with the bleeders. The fronts took the SB7100's but the rears are larger? If so, that is the first time I have heard of that. I will send you a replacement set of the SB1010's (10mm) for the rear calipers. I will include a new label and postage in the package so you can just stick the old ones in, slap the postage on, and drop it in a mail box somewhere.

-Dave

Dave.
I'd like to do that but I can't. I Had a brain fade when bleeding the fronts and broke offone of the bleeder screws at the base on the caliper. I had to wait one day and go to a machine shop to have them E-Z out the old one and used one of the 8mm bleeder screws I'd gotten for the rears up front. So now I have a spare bleeder screw for the fronts. I'd like to have the 10mm's for the rear though. If you'r still willing to send out the 10's with an invoice I could drop a check in and mail back the payment. Or if that's not possible. E-mail me and we'll get payment strategies straightened out. Thanks for the initial good value and prompt delivery.
Mitch

Mitch, I PM'ed you. :)

-Dave

Would it be possible for me to buy just one pair of speed bleeders?

Yep, we offer them in pairs. It isn't on the website so if you would like to order a set you can either give me a call here or you can send Paypal to sales@oakos.com. They are $14 + $1 shipping for a pair.

-Dave

Originally posted by Oakos Automotive
I still have over a hundred of these available! :)

-Dave

So do I have to buy 2 pairs to take care of the whole car or do you sell all 4 for $28 USD?

Nevermind! I saw it. Sorry!

Do you have a speed bleeder that fits the clutch? Getting close to brake and clutch fluid changes for me :)

I am pretty sure that the clutch cylinder takes the SB7100 (7mm) Speed Bleeder. I have a prototype SS braided clutch hose here that I will probably be installing this weekend so I should know for sure soon. :D

-Dave

Bump:

One of the best vendors on the site!!!:D

Bleeding brakes has become fun!!!...............;)


Shotgun

:D

Thanks a lot Shotgun!!

-Dave

Originally posted by ShotgunTC88
Bump:

One of the best vendors on the site!!!:D



I'm starting to agree completely with that. I've bought a few things and Dave always comes through with the extra effort.

Originally posted by ShotgunTC88
Bump:

One of the best vendors on the site!!!:D

Bleeding brakes has become fun!!!...............;)


Shotgun

DITTO!

Thanks a lot fellas!! :D I really appreciate the support.

-Dave

Oakos, I'm ready to order the StopTech set of 4 with the stock rears set of 2. Let me know the exact total and PayPal address and I'll pay ASAP. Thanks. :)

garface,
The Stoptech Speed Bleeder combo (4 Fronts, 2 Rears) is $42 shipped. The Paypal address is "Sales@oakos.com". Thanks! :)

-Dave

PayPal sent. Thank you. :)

Got it. You are very welcome! I'll be dropping off your Speed Bleeders in about a half hour. I'll send you a shipment confirmation email after they go out. Thanks! :)

-Dave

Dave-

You've got Paypal!

-Tighe

Tighe, Got it, thanks! I'll have your bleeders out a little later today. I will send you a shipment confirmation email to let you know when they've been shipped. :)

-Dave

Dave,

Got my speed bleeders already! Wow that was fast. Many thanks once again.

mtb_dude, You are very welcome! I'm glad to hear that they made it there quickly. :)

-Dave

Just ordered a set off the website, they look great! What is the expected delivery time on something like this?

parid, Thanks a lot for your order! I will have them out for you today and they will be going USPS First Class Mail so you should see them around the middle of next week. I'll send you a shipment confirmation email in a little while to let you know when they have been shipped. :)

-Dave

Which will fit the Rotora calipers?

Just ordered a set

Order #2057

kunfuzion, I am not sure which size bleeder screws the Rotora calipers use. Do you have any contact info for them? I can give them a call and find out the required size.

MAD REX, Thanks a lot for your order! I will send you a shipment confirmation email on Monday to let you know when they are shipped. :)

-Dave

Rotora
(626) 369-0401

kunfuzion,
Thanks. I'll try giving them a call tomorrow and I will let you know what I find out. :)

-Dave

Just ordered a set along with some KB shifter bushings. What's the best way to replace all the brake fluid? I'm coming up on my 30K mile service and was thinking of doing it myself if it's not too hard.

jjunior887, Thanks a lot for placing another order with us! :) I'll send you a shipment confirmation email tomorrow after your parts are shipped out.

To replace all the fluid in my car I used a syringe, without the needle, and attached a short piece of rubber hose to it. I used this to extract the fluid from the master cylinder. You don't want to run the MC dry, but removing a lot of the fluid helps to speed up the process. After that, top off the MC with fresh fluid and start the bleeding procedure. Bleed generous amounts of fluid from each caliper to be sure that you have fresh fluid all the way through the lines. Let me know if you have any questions. :)

-Dave

Do you just bleed one caliper until you start seeing the new fluid? then move on to the next one and do the same for each? I know this is a routine procedure for most but I've never messed with my brakes at all so I'm kind of a Newbie there. Thanks for the help Dave -James

James,
Depending on the type of fluid you use, you may or may not be able see the new fluid coming out of the caliper. If you can't tell the difference between the new and old fluids (I couldn't when I did my car) just bleed a lot of fluid out to be sure you got all the old stuff out.

-Dave

I may try something that is noticable the first time just so I get the idea. Thanks again Dave -James

I'd love to buy the hoses/bleeder kit but I'd like to know if the lines will work on a 99 legacy outback. I've ditched the stock wheels in favor of 205/55/16 GT wheels, so the only possible snag would be the slightly taller struts.

I can't think of any other reason why they wouldn't fit, but I figured it would be best to ask first.

Also, ATE SuperBlue brake fluid is great for bleeding brakes. It's blue! I bleed with normal fluid until it stops flowing blue, then put in the good stuff and wait for the flow to turn blue again.

James,
Another thing to keep in mind is that the brake system takes about 17 US fluid ounces of brake fluid so you use that number to "measure" the amount of fluid that you put into the system.

remarcable, I am really not sure if the WRX brake hoses will fit the Outback or not. Thanks for the tip about the brake fluid. Using a different color is a great way to be sure all the old fluid has been evacuated.

-Dave

Replaced all the caliper nipples with speed bleeders this weekend and flushed with ATE Super Blue. They work great! I agree the different color fluid is the way to go. It makes it almost a no brainer. Also, they make a "gold" ATE also, so you can swap between blue and gold ATE for changes. :)

I was a little surprised at how much air was in my lines after less than two years. Made me feel a whole lot better when the bluid fluid flowed out without a hint of air.

mtb_dude, Thanks for the input. I am glad to hear that you are happy with your new parts. :)

-Dave

Ordered a set of bleeders on the website.

Thanks,
-Justin

Justin,
Thanks a lot for your order! :) I'll have your Speed Bleeers sent out later today and I'll send you a shipment after they go out. :)

-Dave

That was fast, I got my speed bleeders and the KB shifter bushings today. Thanks again David. Free bump for an excellent vendor -James

Dave, any updates on the fitment onto the Rotora caliper? Thanks

Jeff

James, You are very welcome. I'm glad they made it there quickly. Thanks for the bump and for the compliment! :)

Jeff, I'm sorry that i haven't taken care of it yet, I still have a note on my desk here to call them so I hadn't forgotten about you. I just tried calling them and they are closed. I will be sure to get a hold of them today and I will report back here as soon as I get some info for you.

-Dave

Dave, if possible can you give me the dimensions of the bleeder valves, thread size, etc... I can ask Rotora when I drop by next week. Let me know.

Jeff

Dave,

Just got these on the car... truly awesome!

Thanks man,

Dan

Just placed an order for a set. Sent you and email though regarding shipping as I need them pretty quickly. I'm starting to ride my wear indicators and I've got a Stoptech Stage 1 on the way so I want to do everything at once. Thanks.

Calvin

Jeff, The Speed Bleeders that are currently in stock here are available in 7mm x1mm, 10mm x 1mm, and 1/4" x 28.

Dan, Thanks for the feedback. Can you imagine going back to bleeding using the old method? I can't! :)

Calvin, Thanks again! :)

-Dave

kunfuzion, I got word that the Rotora calipers take the SB1010 10x1.0mm Speed Bleeders. I'm sorry that it took so long to get the info. :)

-Dave

Hi, do you know of or have the correct bleeder for bleeding the clutch fluid? That's the only other fluid on the car besides the brakes that would be able to use a speed bleeder, correct?Thanks.

Dave,

Got my speed bleeders yesterday. Thanks for expediting the shipping. Great customer service and one of the best vendors around. :D

Calvin

garface, I'm almost positive that the clutch cylinder takes a 7x1mm (SB7100) Speed Bleeder.

Calvin, You are very welcome. Thanks a lot for the great compliments! :D

-Dave

These are going on when I do my WRX caliper and rotor swap on the Forester! wow..and as I was typing this response I get a confirmation from you guys! great dealing with you so far!
~ferretboy

ferretboy, Thanks a lot for your order! It is too late for them to go out today but I will have them sent out for you tomorrow. I will send you a shipment confirmation email to let you know when they have shipped. :)

-Dave

The Wilwood 6 Piston and 4 Piston calipers have two bleed screw each. I assume I would need to sets of Four for the Wilwoods?
Let me know.
Thanks OKD:D

I've heard somewhere that the extra bleeder screw on the calipers is so that the caliper can be mounted on either side of the car and still have a bleeder screw towards the top. When you bleed the Wilwood calipers do you need to open both bleeder screws to bleed the caliper properly or just the top? If you only need to bleed the top one then should be able to use one Speed Bleeder per caliper.

-Dave

Any of these products work on the STI, need steel lines and Bleeders...?.

Nigel.

Nigel, I just PM'ed you. :)

-Dave

The SB7100 7mm Speed Bleeders are now sold out. I ordered a ton more already and I am expecting them to be here soon. :)

-Dave

Ordered, I will let you know if they fit the STI.

Thanks for your order Nigel. I'll send you a shipment confirmation email later today after your Speed Bleeders have been shipped. I look forward to hearing whether or not they fit the STi. :)

-Dave

Any word when the SS brake lines will be in and how much are they for a set.

Nigel.

Hey Nigel, I am not sure when they will get here. I ordered the brake hoses a couple of weeks ago and I am really hoping that they will be here soon, but I haven't gotten any update or indication of when they will actually get here. The price for them is $99. I will report back here as soon as they are in. Thanks! :)

-Dave

The Speed Bleeders are back in stock! I got word yesterday that the brake hoses have been delayed a little bit, but hopefully they will get here by the end of next week. I'll post as soon as they are back in stock. :)

-Dave

Sent e-mail with pictures on Speedbleeder installed on STi. To your web site e-mail address.

N.

WRX 2002, Thanks, I sent you a reply. :)

-Dave

Just sent you order 2159 for the speedbleeders.

Can you also add the SS lines to my order for the $120 price.

Thanks,
Dustin

Dustin, Thanks a lot for your order! I sent you an email about the brake hoses. :)

-Dave

I received my Bleeders, Hoses and Pads last week. Thanks for keeping me up to date.

Installing this weekend.:banana:

You are very welcome. Enjoy! :)

-Dave

Pm'd

HOK, I PM'ed you back. :)

-Dave

There is only one set of Goodridge brake hoses left. We still have tons of Speed Bleeders though! :)

-Dave

The brake hoses are sold out. I ordered a bunch more a while ago but I have no idea when they will get here. Hopefully it won't take as long as last time.

-Dave