|
View Full Version : Utech and JDM motors? geronimo66 04-15-2003, 05:32 PM I am getting close to starting my swap. I am tstarting to get serious about sourcing a motor. My plans are to drop in a Utech TXS stage 2ish set up. My question: Do the JDM ECU's play well with the Utech? WorldOne 04-16-2003, 05:08 PM NO. geronimo66 04-16-2003, 06:18 PM Thanks, guess its USDM for me... peepshow 04-17-2003, 09:59 AM If you get a MY99 or newer JDM motor, ECUTek will work with it. Just FYI. Redline8k 04-22-2003, 04:17 AM you can get the utec to work with the jdm ecu BUT you have to make some kind of "jumper" harness to move and add pins to adapt it to the usdm harness. Thats what Im doing. Im sourceing the wire diagrams from a few people on the board who have done the swap. Then I will make a harness. I will post on this when it all happens, witch should be soon. (i hope) -nick |