Official O.E. Tuning Limited 2 one piece CF Lip. 6k HS fiber MSRP: $399.00

With the approval of our moderators, I am proud to present O.E. Tuning’s first group buy for carbon fiber products to NASIOC! Another first innovation from O.E. Tuning. ( www.oetuning.com )

Limited 2 one piece Carbon Fiber lip will be made of 6K HS weave carbon fiber material (we are the only manufacturer to offer this same material used by Spoon) this material will be offered as an free upgrade from regular 3G MS carbon fiber weave (please visit our website for fiber explanation). All CF lips will have factory color matched paint, PPG clear coat. Direct bolt-on and NO MODIFICATIONS REQUIRED! Our CF lip has been tested for the last 8 months, we used one of our project cars here in So.Cal to make sure our products meets all kinds of driving conditions. We are the direct manufacturer so you can participate and buy with confidence! So here are the details…

O.E. Tuning Limited 2 one piece CF lips will be available for 2002-2003+ Subaru WRX.
Colors: Blue; Silver; White; Black
*cf lips color are factory matched, thus maybe a little different from your car, depending on your driving conditions and your physical location of vehicle.

Group buy will start now, be available for the entire month of May and end on June 2, 2003.

Pricing is as follows
- 1 to 15 lips will be priced at $362 each
- 16+ lips will be priced at $350 each
- as a special introduction to NASIOC, 6k HS fiber upgrade will be free

Shipping options by Airborne Express OR UPS
- 48 contiguous states (ground) is $45
- Hawaii (air) is $110
- Canada (international) is $180
- Local pickup by appointment
- Sunday local delivery by appointment is $50 (25 mile radius)

Payment options
- credit card (Visa/Mastercard)
- money order
- personal check (allow 2 weeks for processing)
- CASH is OK too! Receipt will be given.
- sorry, no Paypal!

Payment plan
- all payments must be received by June 8, 2003
- payment is required before you can sign up for group buy
- CA residents subject to a 8.25% sales tax

Delivery
- Shipment of cf lips expected to arrive 5-6 weeks after end date (approximately mid July 2003) and delivery will commence thereafter

Address
- O.E. Tuning (US office)
- 10501 Valley Boulevard, Suite 1800
- El Monte, CA 91731
- (626) 442-9988 ( M-F 10-6PM )
- Website: http://www.oetuning.com
- sales@oetuning.com

CF Lips are made to order straight from the factory and shipped to the states, so please make up your mind before participating. Deposits are NON-REFUNDABLE to protect everyone's interest. If you are local and would like to view this product on our project car, please call or email us to make an appointment.



http://www.oetuning.com/groupbuy/limited2/102CUSL2-O1.jpg
Original STI 2 pc lip shown. Notice a gap in the middle!


http://www.oetuning.com/groupbuy/limited2/102CUSL2-O2.jpg
http://www.oetuning.com/groupbuy/limited2/102CUSL2-O3.jpg
http://www.oetuning.com/groupbuy/limited2/102CUSL2-O5.jpg
http://www.oetuning.com/groupbuy/limited2/102CUSL2-O6.jpg
http://www.oetuning.com/groupbuy/limited2/102CUSL2-O8.jpg
One piece O.E. Tuning Limited 2 CF lip shown, painted in silver with PPG automotive treated clear coat. Direct bolt-on.


Note* O.E. Tuning 9lb CF WRX Trunks will be offered for GROUP BUY if interested. Price around $550 + shipping.

I want one... let me get my money together. I WANT!:disco:

Is it half painted/CF?? Can't really tell from the pics.

yeah! me want too!! looks very nice!!
Let me think...

Is the lip offered as it looks on the lower pictures? With the Top half Silver, and the lower half CF?

Thanks

I will be watching this thread! I wanted to have a lip before june, but I will Definately keep this in mind :eek:

is there a deposit to get on the buy, or is full payment needed?

I want on the list!! :D (I think if the quality is there and we can get 16 people I am in...)

** I have Emailed you too! ;)

Should Wagon owners assume that there is no available lip for us?

TIA

PS. I really hate paying tax but I LOVE paying ca$h ;)

Could you tell me how much lower than the stock bumper this lip sits?

I had a greddy lip I couldn't use becasue it would scrape so I don't want to be in the same boat with this one.

Thanks.

Hey there guys, the car that you see there is my, so if any one have any question about the product, feel free to pm or e-mail me ok, my e-mail is joewc34@aol.com. Just to answer some quesiton for you guys first.

DubuRX- The whole lip is painted to color match the car and the middle section is carbon fiber it is very clean

saggioWRX - The lip is exactly like in the picture, but something else might come up later.

WR xplosive - unfortunately, i haven't hear anything about it yet

Kwyjibo - the lip hang down a bit low actually, it about 2 to 2 1/2 in lower than the stock bumper, so just becareful especially if your car is lower.

Hopefully this has answer some question for you guys.

Joe

alright, I want to get on this. can we put down a deposit, or are you asking for full payment up front?
also since the lips won't ship till july when will our credit card be charged?

also, is mounting hardware included? or only 3m tape?

thanks

-Antonio

Edit: Just re-read the post, paying in full prior to ordering. OE - I would recommend you run a list of the people that are interested and collect funds from these people once the group buy closes. You can put me on the list - I've been waiting for something like this to come along forever.

I'd be interested in a GB on the CF hood too.

You forgot to add Puerto Rico to the shipping list!

I'll take one like the one in the pick (silver w/ lower carbon).

I'll send Postal Money Order in!

Thanks!
Leo

excuse me but 180USD for shipping to Canada? are you sure??

Can I pick it up?

Originally posted by [freeman]
excuse me but 180USD for shipping to Canada? are you sure??

Ditto. That seems stupid expensive. I can STi lips from Japan with S&H cheaper than that... Its a nice lip but I'll never pay that for someone to deliver something. Can you double check the price please and thanks. ;) JC

I hope I'm wrong but the price is due to the size of the box as the STi Ver 2 lip is easier to ship because it SPLITS in half as oposed to this unit, PLUS they have to add good packaging so it won't breake in half while shipping.

Leo:confused:

How does the carbon fiber compare to the OEM abs? Durability wise.

Ohh and will price be lower if more people join the GB?

Dammit that lip looks so sweet :eek:

Too bad I'm too scared of scraping to get it... :(

DragII - I talk to Jerry at O. E. tuning and he told me that the payment will be as the following, 50% non-refundable at the end of GB and then the other half right before delivery.

digitaltekniq - will make a list soon and if there is enough of an intrest there will be a group buy for the hood, and trunk as well.

Leonardo - I have to ask Jerry first, because he deals with all of that stuff

Oo DaRk StAr oO - it stated in first post that you will be able to do local pickup and there is a local delivery as well, but within a 25 mile radius for 50 bucks i think

thejean - will recheck the price for sure

asnrefugee - carbon fiber is a lot stronger that the oem abs stuff because it is able to flex more and lite weight. For more detail go to the website to get a full explaination.

Tyrannosarus Rex - well it depends how low is your car, because that lip is really not that low, but you just have to be really carefully thou.

Hopefully this has answer some of you question.
Joe

These are the people that are interested and want in on this group buy.

1. DubuRX
2. dooolu (not sure yet)
3. HiFiWRX
4. DragII
5. digitaltekniq
6. Leonardo
7. revumbra (waiting on wife's ok)
8.
9.
10.
11.
12.
13.
14.
15.
There will be a price drop to 350 if there is enough people

Here is the list so far. It will be updated daily
thanks
Joe

I'm in...for definite.

yup me too! just waiting to call on monday!

Still on the fence, mulling it over as i talk to my accountant (wife) for funding.

hey a little off topic.
How much is the CF wing and trunk?

I'm in if you can do a sedona red one.. please pm me
or an unpainted red/black or red/gray carbon fiber kevlar weave

Joe, can you please get us more info on the trunk? Will it hold the downforce of the wing at high speeds?

And yes, I'm in for the lip.

Leo

asnrefugee - as far as the trunk goes, he is planning to sell it in a group buy. The trunk is really nice, it is keyless and weight only 9lbs. The fitment is great it is like the monster sport trunk. I have some pic but they are not that great but i can send it to you guys if you really want to see it. For the wing he is planning to sell that as well, but i'm not too sure how much, but i know for sure it is going to be very competitive price.

The is was in the first post = Note* O.E. Tuning 9lb CF WRX Trunks will be offered for GROUP BUY if interested. Price around $550 + shipping.

lgkahn - I will go fine out if the lip can be painted in the sedona red ok.

Leonardo - The trunk has no key hole, weights 9lbs, fitment is great and good quality. Honestly i'm not too sure if it would be able to handle the downforce of the wing, because we never tried it, but as they told me that they would not recommended it.

If you guys have any more question, feel free to as ok.

Joe

Joe,

Do you have any decent pics of the spoiler? The details page is broke on the site.

Cheers

Rich

:D I emailed you a proposition! Check it out and let me know what you think!

Anyone know how much the OEM trunk weighs? I'd like to see some pics of the CF trunk:D

how much is the wing tho?

Are they painted in every factory Subaru color?

Thanks Joe for keeping everyone up to date.

Hopefully I can answer a few more questions.


Originally posted by WR xplosive
Should Wagon owners assume that there is no available lip for us?

TIA

PS. I really hate paying tax but I LOVE paying ca$h ;)


If there is enough interest, this item would be possible.


Originally posted by Leonardo
I hope I'm wrong but the price is due to the size of the box as the STi Ver 2 lip is easier to ship because it SPLITS in half as oposed to this unit, PLUS they have to add good packaging so it won't breake in half while shipping.

Leo:confused:

Yes this lip does not split in half like the STi V2 lip which is much easier to ship. On top of that, a custom box had to be custom designed and produce just for this lip.


Originally posted by [freeman]
excuse me but 180USD for shipping to Canada? are you sure??

Shipping to Canada is expensive. We pay for your duty, extra insurance and all documentation.


Originally posted by djerickd
Anyone know how much the OEM trunk weighs? I'd like to see some pics of the CF trunk:D

Stock trunk weighs about 20-30lbs est. Our CF trunk weighs around 9lbs which can be lifted with one finger easily.


Originally posted by asnrefugee
how much is the wing tho?

Pricing and availability will be available before the end of this group buy.


Originally posted by 03WRXMA
Are they painted in every factory Subaru color?
Yes, this is factory matched paint.

* O.E. Tuning color matches 100% to factory color, but perfect paint match is impossible since everyone's driving habits, road and weather conditions differ from place to place, those vehicles exposed to a lot of extreme weather conditions might experience more paint fade then inner city vehicles.



Please let me know how many people are interested for a
11.5lb Carbon Fiber 2pc hood w/ STi raised CF scoop or
9lb Carbon Fiber trunk key-less trunk.

again please visit our website for complete details (www.oetuning.com)

Thanks.

- O.E. Tuning

Can I pick this up?

Originally posted by O.E. Tuning
Yes, this is factory matched paint.

* O.E. Tuning color matches 100% to factory color, but perfect paint match is impossible since everyone's driving habits, road and weather conditions differ from place to place, those vehicles exposed to a lot of extreme weather conditions might experience more paint fade then inner city vehicles.


Don't take this the wrong way, but that's not answering 03WRXMA's question. ;)

I think the question is, are you offering these painted in every factory Subaru WRX color -- not just the usual blue, silver, etc, but also the less-common colors like Sedona Red, or Sonic Yellow? If the answer is yes to Sonic Yellow, at the same price, I may be interested...

Dave

Originally posted by Oo DaRk StAr oO
Can I pick this up?

it says in the initial post pick up is ok by appointment.

oetuning - emailed ya.....I'm trying to get my deposit put down.

Yes, I would be interested in a hood, I don't need the STI scoop as I already have one ;)

Yes, let us know where to send deposits, the amounts etc.

Originally posted by quasi888


Don't take this the wrong way, but that's not answering 03WRXMA's question. ;)

I think the question is, are you offering these painted in every factory Subaru WRX color -- not just the usual blue, silver, etc, but also the less-common colors like Sedona Red, or Sonic Yellow? If the answer is yes to Sonic Yellow, at the same price, I may be interested...

Dave

Hello Dave,

No problem. Other colors would be offered if there is enough demand for it ( at least 5 lips ordered in the sedona red or sonic yellow ) , if not there will be a slight increase in price for a specific color. To keep our products at an competitive price we can only offer so many variations of the color.


Originally posted by digitaltekniq
Yes, I would be interested in a hood, I don't need the STI scoop as I already have one ;)

Yes, let us know where to send deposits, the amounts etc.

Originally posted by DragII


it says in the initial post pick up is ok by appointment.

oetuning - emailed ya.....I'm trying to get my deposit put down.

Those of you on the list will be contacted via email to make an deposit.


Thanks

- O.E. Tuning

Originally posted by quasi888


Don't take this the wrong way, but that's not answering 03WRXMA's question. ;)

I think the question is, are you offering these painted in every factory Subaru WRX color -- not just the usual blue, silver, etc, but also the less-common colors like Sedona Red, or Sonic Yellow? If the answer is yes to Sonic Yellow, at the same price, I may be interested...

Dave

This guy can read my mind! Thanks, Im not sure if we would have 5 Sonic Yellow's interested....

As stated before, please find out shipping to Puerto Rico (00979) and about the hoods, any chance of doing something like the Kaminari or even something WITHOUT a hood scoop? How about one like the OEM but with the Aqua reverse scoop molded in?

I ask this because I have a FMIC and I know the croud with them is growing. And also, do your IS300/Altezza hood (the first one on the list) really require hood pins? Wouldn't like to ruin the looks of the car with them unless it's really required.

TIA
Leo

I'm interested. I can do local pickup.(Silver)
Also, anyway of getting the CF trunk with stock spoiler holes drilled in?

-David

Did you get me email, I am anxiously awaiting your reply! ;)

I am going to be entered in the Hot import nights show in July so I need to get my car completed by then... Thanks for your consideration!

Talk to you soon. :D

Originally posted by 03WRXMA


This guy can read my mind! Thanks, Im not sure if we would have 5 Sonic Yellow's interested....

You and me make two!

I say we mention this GB in the Official Yellow Thread in the Dress Up & Style forum...I'm sure we could get 3 more!

Personally, I think the CF center section would look great against the Sonic Yellow.

Dave

Can you put me on the list as a maybe for a silver lip. I will make up my mind when the group buy closes.

any update on getting a sedona red one???

thanks

OE Tuning, I started a thread for Wagon owners. Hopefully, we, wagon owners, can make it happen.

come on guys tell a friend...lets bring the price down! :D


OE are you going to mail those of us on the list at the end of the buy, or sometime before then? Doesn't really matter to me, just as long as I'm on it though :devil:

Please follow this link for full payment and deposit.

Official list will start once full payment and/or deposit have been received.

O.E. Tuning CF Lip Payment / Deposit (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)


Originally posted by lgkahn
any update on getting a sedona red one???

thanks

Other colors will be produced in quantities of 5 or more. If 5 orders are not met, a 10% increase will be charged for colors other then what is offered.


Originally posted by Leonardo
As stated before, please find out shipping to Puerto Rico (00979) and about the hoods, any chance of doing something like the Kaminari or even something WITHOUT a hood scoop? How about one like the OEM but with the Aqua reverse scoop molded in?

I ask this because I have a FMIC and I know the croud with them is growing. And also, do your IS300/Altezza hood (the first one on the list) really require hood pins? Wouldn't like to ruin the looks of the car with them unless it's really required.

TIA
Leo


Leo, I am still waiting for a carrier to give me a reasonable price. I will notify you shortly.


Originally posted by WR xplosive
OE Tuning, I started a thread for Wagon owners. Hopefully, we, wagon owners, can make it happen.

Awesome. Hope to have your good news.

Sweet! payment sent for Midnight Black :D

I am definitly interested but I am alittle hesitant because of the long wait. Also you say the deposit is non-refundable. What if there is a problem and the lips are never made or never get to you guys etc. Would the deposit be refundable then?

This would look great on my wagon. Please make these. I'm sure that even a small amount made for us wagon nuts would result in greater sales and demand down the road. Jere..

P.S. I am more than willing to spend the money if they are willing to make.

This would look great on my wagon. Please make these. I'm sure that even a small amount made for us wagon nuts would result in greater sales and demand down the road. Jere..

P.S. I am more than willing to spend the money if they are willing to make.

Originally posted by TSReynolds
I am definitly interested but I am alittle hesitant because of the long wait. Also you say the deposit is non-refundable. What if there is a problem and the lips are never made or never get to you guys etc. Would the deposit be refundable then?

To protect the interest of the group buy and close in on pricing, Non-refundable was just to protect the users and buyers. We meant non-refundable as in you cannot change your mind once you make payment, cancel the group buy, sold the car, mom can't give me the money, wife won't allow it etc. :)

If we cannot guarantee our product and production, a group buy would never have been offered. If we cannot deliver the goods, of course it will be refundable.

Originally posted by JWAG
This would look great on my wagon. Please make these. I'm sure that even a small amount made for us wagon nuts would result in greater sales and demand down the road. Jere..

P.S. I am more than willing to spend the money if they are willing to make.


I believe WR xplosive is setting up some kind of a list for Wagons.

payment sent for a sedona red one will pay the extra 10% most likely...

Deposit sent for lip in platinum silver :D

As far as a lip for the wagon goes, how many people do you need for this to be possible? I'm just trying to get a realistic idea of what it will take to get this going. Jere.

Originally posted by JWAG
As far as a lip for the wagon goes, how many people do you need for this to be possible? I'm just trying to get a realistic idea of what it will take to get this going. Jere.

great question Jere. OE Tuning, if you need a WAGON to fit your prototype, I'd be happy to do it but just make sure not to scratch my paint :D

I live around SGV area

Deposit sent for WRB

Originally posted by JWAG
As far as a lip for the wagon goes, how many people do you need for this to be possible? I'm just trying to get a realistic idea of what it will take to get this going. Jere.

Minimum of 20 people will be needed to start production.

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black

3. LGKAHN
color: red

4. DIGITALTEKNIQ
color: silver

are these gonna be available to buy after the group buy?

Originally posted by cheebus
are these gonna be available to buy after the group buy?

These products will be available from our website at http://www.oetuning.com

i want a trunk

i didnt read thru the whole post, but from what i understand is that it comes half painted. can i get it non painted and just clear coated?

I just wanted to tell everyone who ever want to see a pic of carbon fiber trunk, just pm me your email and i can send you guys the pic, or if not i can ask Jerry o.e. tuning, if i can post up the pic on this tread, so that everyone can get an idea what it look like and what kind of quality it is, but actually the pics are not that great but you will get the idea. Well, come on everybody, there are only four people on the list so far, so get your friend or any body to pick this lip up so you guys can save some money.

Joe

Im looking at the CF hoods.. are the scoop and hood seperate pieces? I assume thats what they mean.. but I want to be clear. I really want that Sti spn one. But $805 shipped is pretty pricey. Any way to get that lower? (2002 WRX)

I noticed it only says JDM.. whats the diff between their hood and the USDM? Can I not get this hood?



Chris

I can't find anything on the website that compares the quality of the carbon withh OEM abs plastic.

I am so interested. I love this lip so much. Does anyone know or tried to fit one on a MY99-01 RS?

Originally posted by Subie2
Im looking at the CF hoods.. are the scoop and hood seperate pieces? I assume thats what they mean.. but I want to be clear. I really want that Sti spn one. But $805 shipped is pretty pricey. Any way to get that lower? (2002 WRX)

I noticed it only says JDM.. whats the diff between their hood and the USDM? Can I not get this hood?



Chris

This is a 2pc hood ultra light weight hood, made and designed in Japanand will fit USDM spec cars. Hoods fits perfect on our USDM prototype car. Aluminum latch, stock mounting positions, pre-drilled nozzles, please visit our website for more details (www.oetuning.com)

Originally posted by asnrefugee
I can't find anything on the website that compares the quality of the carbon withh OEM abs plastic.

We try to stay away from plastic parts as abs does not stand up to heat very well.

Originally posted by atomicapples
i didnt read thru the whole post, but from what i understand is that it comes half painted. can i get it non painted and just clear coated?

The edges around the vents of the lip is produced with a new NPFP type of durable polyurethane mix with fiberglass and O.E. Tuning's 6k HS carbon fiber. This paticular new material was chosen because of the vent designs in O.E. Tuning's Limited 2 Front lips. If you want one just clear coated it will be flat black, with 6kHS carbon fiber.

Originally posted by tecniks
I am so interested. I love this lip so much. Does anyone know or tried to fit one on a MY99-01 RS?

Modifications will be required for you 99-01 RS.

I do apologize for some late emails, as we are not open on the weekends to reply to them.

Thanks again and feel free to let us know if you have any further questions.

Bump.. for a great website and awesome CF stuff!!

Its about time someone offered more CF for our car! :D

Chris

I'm not sure if this has be asked already but i just have question on CF lips in general. Since the lips are installed on the front where it will most likely take a lot of abuse, how durable is the lip?As in, if i get it scraped or curbed, can it be repaired and re-painted easily?

Forgot to include my color when I made my deposit. Make it a silver piece.

Thanks,
Mike A.

Originally posted by Subie2
Bump.. for a great website and awesome CF stuff!!

Its about time someone offered more CF for our car! :D

Chris

Thank you.


Originally posted by SiOrange
I'm not sure if this has be asked already but i just have question on CF lips in general. Since the lips are installed on the front where it will most likely take a lot of abuse, how durable is the lip?As in, if i get it scraped or curbed, can it be repaired and re-painted easily?

We use PPG Clearcoat one the finish of the lip which is very durable. Our prototype car has been through some rough very hard driving and curb checking, lip still holds up like new, like any real PPG Clearcoat parts, scracthes can be easily fixed with some rubbing combound.
Originally posted by Dragon7606
Forgot to include my color when I made my deposit. Make it a silver piece.

Thanks,
Mike A.

Thank you for your order, however please check your email as we had a slight problem with you transaction.


Thanks again,

O.E. Tuning

Update:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black

3. LGKAHN
color: red

4. DIGITALTEKNIQ
color: silver

5. Dragon7606
color: silver

is this still going on?

It's on till June!

it pretty much just started. hop on it man! :D

YESSS!!!!!
how much will it be shipped and painted white?

Click the link and find out :D

http://www.oetuning.com/oe-shop.asp?category=Groupbuy

so the painted front lip is $360 + $45 for shipping - $2 if i pay full
is this correct?
the $360 is painted isn't it?

yeah, they come painted!

Cant place order on above link as Puerto Rico isn't an option! Know how many people here are looking for that lip?

Update:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black

3. LGKAHN
color: red

4. DIGITALTEKNIQ
color: silver

5. Dragon7606 ( Thank you for full payment )
color: silver

Originally posted by Leonardo
Cant place order on above link as Puerto Rico isn't an option! Know how many people here are looking for that lip?


Shipping to Puerto Rico will be $160.00 UPS Second-Day AIR Select delivery.

if i pay now, when will you ship it to me / us?
do i have to wait until the GB end?
i'm just curious
thanks :)

Originally posted by chobits
if i pay now, when will you ship it to me / us?
do i have to wait until the GB end?
i'm just curious
thanks :)


Delivery
- Shipment of cf lips expected to arrive 5-6 weeks after end date (approximately mid July 2003) and delivery will commence thereafter

MID OF JULY ???????????????
oh well, i guess i have to wait ...............

Originally posted by chobits
MID OF JULY ???????????????
oh well, i guess i have to wait ...............


If you prefer not to wait and participate on this group buy, this item can be purchased directly from our website at ( www.oetuning.com )


Thank you,

- O.E. Tuning

how much is it if i buy directly from ur site?
is it gonna be the same?
i couldn't find it on the site
thanks

http://www.oetuning.com/oe-store.asp?category=Other&itemnum=102CUSL2-SPN

looks like it's 399 + shipping

the total is $484.00 on the regular price
i'll stick w/ the gb

thanks for the info :)

do you think it's weird to use STi lip w/ stock rims?

So we get a break on shipping if we buy in the group buy, apparently? hmmmm.

Originally posted by DubuRX
So we get a break on shipping if we buy in the group buy, apparently? hmmmm.

Shipping and product cost is discounted since this would be a group purchase.

Thank you and I hope everyone has a great weekend.


- O.E. Tuning

If we could get a few more sonic yellows, then id be all over this group buy

How strong would this lip be, Im assuming that it is the exact same size as the STi v2 lip and i here that scraps A LOT so I was just wondering how strong this would be.

Thanks,
Mike

Originally posted by onesillyracer2k2
If we could get a few more sonic yellows, then id be all over this group buy

I have a Sonic Yellow too, and was (still am?) interested in this (I posted earlier too.) I think the CF center section would contrast VERY nicely against the yellow.

The thing is, I am torn between this lip and the MRO lip that autoartech.com is offering (see thread in Vendor - For Sale). If this lip is the same dimensions as the STi v2, I am really concerned about scraping. (I have Prodrive springs which drop the front aout 1.5") However, the strength of carbon fiber helps. On the other hand, the MRO lip looks very nice too (a unique design, not a replica of anything), the drop is a more modest 30mm (about 1.5"?), is cheaper, but is made of fiberglass-reinforced plastic.

Decisions decisions...

For the past few months i had the lip on my car and all i can say is that it does scap, but if you are careful you shouldn't have any problem at all. The lip is very strong, it held up very good to all the different type of driving i put it through. Just to let you guys know my car is on 18in and drop with MRT springs. Another thing is that the lip drop about 1.5in i think not too sure, but it looks really good trust me. Honestly if you really want the lip it shouldn't be an issue, because it is underside anyways and no one can see it. Trust me in the beginning it really hurt everytime i scap it, but after awhile there is nothing you can do, but say "oh well". All i can say is the lip is very strong and you shouldn't have any problem.

Joe

For those of us that put down a deposit, are you gonna put up a link to pay the balance? I'll be ready soon.

Ditto here

i think this is the link to pay / put a deposit

http://www.oetuning.com/oe-shop.asp?category=Groupbuy

we have a deposit down already, we want to know how to pay the balance.

I just posted over in the Dress Up & Style forum to see if we can drum up more interest in Sonic Yellow....

Now do a CF hood groupbuy!! Im in for a hood with free shipping or upgrade to 6k CF.. what exactly is the difference between 6k and 3k besides weight? Is the weave diff?

Chris

Originally posted by Subie2
Now do a CF hood groupbuy!! Im in for a hood with free shipping or upgrade to 6k CF.. what exactly is the difference between 6k and 3k besides weight? Is the weave diff?

Chris

Please visit ( www.oetuning.com ) and click on about us. There is a big difference in the 2 types of fiber we carry.



Originally posted by DragII
For those of us that put down a deposit, are you gonna put up a link to pay the balance? I'll be ready soon.

A link will be sent through email to those of you whom have a remaining balance.

Ok I think im ready to order...

Do you or can you accept PayPal?

Thanks,
Mike

I didnt read thru all the threads to see if its been brought up (probably has) but you could sell a dozen or so if you made these for the wagon. I'd prefer the version 1 style w/out the ducting but there seems to be more interest in version 2. Two other vendors have promised this in the past but noone has come thru.

Ok... I want to order the Hood 6k SPN one. You told me before that shipping to a buisness address would be $125. How do I get that when I order.. the shipping is already added into the final price when I add it to my cart?

2002 WRX hood with STi CF Scoop SPN 6k

Chris

i had a greddy lip made of polyurethane, 2 weeks ago i was merging onto 95 and all of a sudden a tire tread from an 18wheeler comes at me. all i could do w/o swerving and hitting someone was to run it over. when i got home i found my lip cracked in two places. took it off but the car looks wierd with side skirts, rear underspoiler and no lip. this looks like a good replacement but i hope itll last longer than a year this time. 95 is a death trap

just ordered mine!

Originally posted by Subie2
Ok... I want to order the Hood 6k SPN one. You told me before that shipping to a buisness address would be $125. How do I get that when I order.. the shipping is already added into the final price when I add it to my cart?

2002 WRX hood with STi CF Scoop SPN 6k

Chris


Hello Chris,

Please direct your email to sales@oetuning.com




Originally posted by mlambert
I didnt read thru all the threads to see if its been brought up (probably has) but you could sell a dozen or so if you made these for the wagon. I'd prefer the version 1 style w/out the ducting but there seems to be more interest in version 2. Two other vendors have promised this in the past but noone has come thru.


I believe WR xplosive is setting up some kind of a list for Wagons.


Originally posted by TheShadowWRX
Ok I think im ready to order...

Do you or can you accept PayPal?

Thanks,
Mike

MO, Bank Check, or Visa Master through the following link.


O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black

3. LGKAHN
color: red

4. DIGITALTEKNIQ
color: silver

5. Dragon7606
color: silver

Update:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black

3. LGKAHN
color: red

4. DIGITALTEKNIQ
color: silver

5. Dragon7606
color: silver

6. lianregnif
color: ?

This is howard. My car is silver

I have been meaning to call you (oetuning) regarding our previous discussion. I will try to do that again on Monday!

I am ready to order but before I do I wanted to know what is the likelyhood that I will have the lip so I can install it BEFORE July 18th? Hot Import Nights is on the 19th and I need to have it installed by then....

Thanks, talk to you on Monday about the rest of the stuff we discussed.

Originally posted by O.E. Tuning

The edges around the vents of the lip is produced with a new NPFP type of durable polyurethane mix with fiberglass and O.E. Tuning's 6k HS carbon fiber. This paticular new material was chosen because of the vent designs in O.E. Tuning's Limited 2 Front lips. If you want one just clear coated it will be flat black, with 6kHS carbon fiber.


I'm curious now...how much of this lip is actually carbon fiber? Is it just the exposed center section that is CF, and the rest is this polyurethane mix with fiberglass ? Or is it mostly carbon fiber? What percentage?

Dave

I am also interested in a CF Hood group buy...

OE Tuning, I contacted you via your website. I forgot to ask if I could bolt in my existing stock hood scoop to your hood, and where are you guys located?

Originally posted by MiamiLife
I am also interested in a CF Hood group buy...

OE Tuning, I contacted you via your website. I forgot to ask if I could bolt in my existing stock hood scoop to your hood, and where are you guys located?


Hello. Please wait for a reply via email. All existing OEM components can be bolt on. We are located in Souther California.


Originally posted by quasi888


I'm curious now...how much of this lip is actually carbon fiber? Is it just the exposed center section that is CF, and the rest is this polyurethane mix with fiberglass ? Or is it mostly carbon fiber? What percentage?

Dave

More then 70% of the lip construction is made of O.E. Tuning's 6k HS carbon fiber.


Originally posted by HiFiWRX
I have been meaning to call you (oetuning) regarding our previous discussion. I will try to do that again on Monday!

I am ready to order but before I do I wanted to know what is the likelyhood that I will have the lip so I can install it BEFORE July 18th? Hot Import Nights is on the 19th and I need to have it installed by then....

Thanks, talk to you on Monday about the rest of the stuff we discussed.


You will recieve the lip for sure by July 18th. Please excuse for our absence in telephone calls as we are mostly away this month preparing for some shows and events. If you do get the machine when you call please leave a message as someone will get back to you shortly.

Update:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black

3. LGKAHN
color: red

4. DIGITALTEKNIQ
color: silver

5. Dragon7606
color: silver ( Thank you for full payment )

6. lianregnif
color: silver ( Thank you for full payment )

reminder: Group Buy ends June 2, 2003

Hey guys,

Let me know the link to put the remainder down, I can pay up in full :D

Cheers

Rich

Originally posted by digitaltekniq
Hey guys,

Let me know the link to put the remainder down, I can pay up in full :D

Cheers

Rich

yup me too.

Just placed a deposit down on one painted silver. It charged me tax on my deposit? Well it should all work out when i pay up the rest I hope.

-Bernard

hey O.E,

I know this might be a dumb question, but how about possiblily building a CF Trunk for us GC8 guys?? We always get left out...
I really want to get my hands on one but NO ONE cares to answer any of my emails, especially Fiber Image... VERY disappointed. I know there is ALOT of US GC guys who want a trunk..

SO WHAT DO YOU GUYS SAY???

anyone know the price of the real sti one? i am interested but i have lots of other stuff to pay for!

Originally posted by GregsblueRex
anyone know the price of the real sti one? i am interested but i have lots of other stuff to pay for!

A real STi V2 lip goes for about at least $465 painted, but remember it is a 2-piece design (there is a seam running down the middle), and is polyurethane (prone to warping) as opposed to CF.

I just went to the site and paid in full!

Just in case you don't get the comments I left, I would like the V2 lip in silver (Platinum Silver Metallic), in that cool half painted style on the main page (I'm assuming that's how you paint them anyway). Thanks a lot, I look foward to recieving the lip!!

Also, the lip will be made in the upgraded carbon fiber correct? Thanks!

-Sean

How hard is this to install in your drive way. Since it already painted there is no need for a body shop to install it right?

I am interested in the lip in silver.

the installation of the lip is very simply, all you need to do is get the double sided tape ready and put it in it proper place and then you are done. After that all you have is a nicer looking car.

hope that will help

Joe

How well does the double sided tape hold up to the northeast weather?...anybody with expirience with double sided tape in the northeast?

I had double sided tape holding up my old side mouldings on my VW for a year and a half. As long as you use the good 3M double sided tape and clean the surfaces you're applying it to, you'll be AOK...

After apply the double sided tape on your car, make sure not to was your car for a day or so, making sure that it has time for the tape to be hold in place, other than that you shouldn't have any problem at all.

Joe

i paid in full just now
how many people in the group buy so far including me?


I FORGOT TO PUT THE CAR'S COLOR!!!!!!!!!!
my car is ASPEN WHITE, and my order number is 001078

sorryyyyyyyy!!!!!!!!!

Hey chobits -

Aren't you the guy with the Prodrive lowering springs? I've got 'em too. If I decide to go for this lip, looks like we'll both be scraping ! :lol:

Actually, although I like this lip very much, I'm still trying to finalize my decision. It would cost me an extra 10% to get it in Sonic Yellow, and I also have to pay CA sales tax. With shipping, that significantly increases my price... :(

Dave

Originally posted by quasi888
Hey chobits -

Aren't you the guy with the Prodrive lowering springs? I've got 'em too. If I decide to go for this lip, looks like we'll both be scraping ! :lol:

Actually, although I like this lip very much, I'm still trying to finalize my decision. It would cost me an extra 10% to get it in Sonic Yellow, and I also have to pay CA sales tax. With shipping, that significantly increases my price... :(

Dave

i don't have prodrive spring, but ur nick looks familiar to me

uh ... u have to pay 8.25% + another 10% for sonic yellow?
that's pretty crazy
$478.91 is the total

:eek:

Seriously guys, hook me up with the payment link for my remaining balance. I have money set a side for this, but it's begining to burn a hole in my pocket....save me from myself :D

How much for the wing and the trunk and the hood all together

:D :D :D :D

[B]Update:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black

3. LGKAHN
color: red

4. DIGITALTEKNIQ
color: silver

5. Dragon7606
color: silver ( Thank you for full payment )

6. lianregnif
color: silver ( Thank you for full payment )

7. chobits
color: aspen white ( Thank you for full payment )

8. Schleppy
color: silver ( Thank you for full payment )


reminder: Group Buy ends June 2, 2003

Please check your emails for remaining balance payment.

CF Hood Groupbuy will start shortly.

Balance paid!

midnight black pearl

color code: 08V

thanks!

:D

balance paid with extra for custom color
color 94h sedona red..
thanks

still middle of july eta.. it seems it could be earlier if they are already needing color codes.

how much for the cf hood gb?

Balance paid for Platinum Silver.

Cheers :D

Rich

Originally posted by O.E. Tuning
CF Hood Groupbuy will start shortly.


ALRIGHTY THEN!!!

*Awaits the GB

Chris

O.E. Tuning, you've got mail.

:disco:

so is that hood groupbuy coming out today or tomm??

Chris :D

OE, do the regular prices, not the group buy, on your site include painting?

Originally posted by WORWRX
OE, do the regular prices, not the group buy, on your site include painting?

Same question...

OE Tuning -

I have used the "pay in full" link for my order for a Sonic Yellow lip. Since I have to pay extra, please tell me how I can pay the balance. (Please read my comments in the order submission.)

Thanks

Dave

OE Tuning,

Put me down for one CF lip, World Rally Blue Pearl. I went to pay at your website, but you don't take Paypal or AMEX. I need instructions on how to pay with a money order because I don't own a Visa or Mastercard. I just called, but got your answering machine. Please let me know, because I want to ensure I'm in on this GB. I will send an e-mail just in case. Thanx.

Just wondering when the lips are going to be made, and when I should expect to see it at my door :-)

Thanks!

i'm wondering how many people we have since the gb is ended
anyone knows when can we get it?

Originally posted by industrial
Just placed a deposit down on one painted silver. It charged me tax on my deposit? Well it should all work out when i pay up the rest I hope.

-Bernard

Transactions was declined. Please check your email.




Originally posted by CVC THIS
hey O.E,

I know this might be a dumb question, but how about possiblily building a CF Trunk for us GC8 guys?? We always get left out...
I really want to get my hands on one but NO ONE cares to answer any of my emails, especially Fiber Image... VERY disappointed. I know there is ALOT of US GC guys who want a trunk..

SO WHAT DO YOU GUYS SAY???


If there are enough demands for the item, this will be possible for production., However there were over 20 people interested in this CF lip and we only ended up with 10 people. When enough interest is generated, please send an email via O.E. Tuning's website ( www.oetuning.com )


Originally posted by Schleppy
I just went to the site and paid in full!

Just in case you don't get the comments I left, I would like the V2 lip in silver (Platinum Silver Metallic), in that cool half painted style on the main page (I'm assuming that's how you paint them anyway). Thanks a lot, I look foward to recieving the lip!!

Also, the lip will be made in the upgraded carbon fiber correct? Thanks!

-Sean

Yes the lip will be produced with O.E. Tuning's 6k HS carbon fiber ( upgraded from standard 3K MS )


Originally posted by Subie2
so is that hood groupbuy coming out today or tomm??

Chris :D


CF hood GB will start within the next 2 weeks.


Originally posted by WORWRX
OE, do the regular prices, not the group buy, on your site include painting?

Originally posted by djerickd


Same question...


Yes. All lips are painted, please specify your color spec before you order.


Originally posted by quasi888
OE Tuning -

I have used the "pay in full" link for my order for a Sonic Yellow lip. Since I have to pay extra, please tell me how I can pay the balance. (Please read my comments in the order submission.)

Thanks

Dave

Thank you for your payment. Please check your email.


Originally posted by Rally Punx
OE Tuning,

Put me down for one CF lip, World Rally Blue Pearl. I went to pay at your website, but you don't take Paypal or AMEX. I need instructions on how to pay with a money order because I don't own a Visa or Mastercard. I just called, but got your answering machine. Please let me know, because I want to ensure I'm in on this GB. I will send an e-mail just in case. Thanx.


Please check your email for details.


Originally posted by Schleppy
Just wondering when the lips are going to be made, and when I should expect to see it at my door :-)

Thanks!


Production has already been started. We will expect to be shipping mid-June.




- As we come to the end of this group buy, we would like to thank everyone for their support and interest in O.E. Tuning products. We are determined to provide the Subaru enthusiasts real carbon fiber products and special development such as this O.E. Tuning's limited 2 style lip.

Carbon Fiber hood details will be posted shortly.

Thanks again

- O.E. Tuning.

Thank you! Final GB list:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black ( Thank you for full payment )

3. LGKAHN
color: red ( Thank you for full payment )

4. DIGITALTEKNIQ
color: silver ( Thank you for full payment )

5. Dragon7606
color: silver ( Thank you for full payment )

6. lianregnif
color: silver ( Thank you for full payment )

7. chobits
color: aspen white ( Thank you for full payment )

8. Schleppy
color: silver ( Thank you for full payment )

9. quasi888
color: yellow ( please pay balance by June 8th )

10. HiFiWRX
color: blue ( please pay balance by June 8th )



Group Buy has ended. Please visit our website if you are interested in this product. ( http://www.oetuning.com )

Please check your emails for remaining balance payment.

CF Hood Groupbuy will start shortly.

Originally posted by O.E. Tuning
Please check your emails for remaining balance payment.

No email yet..

HiFiWRX@aol.com

:)

No email yet..
:)

Yeah, me neither. :)

Also, OE Tuning, please make sure my yellow is the '03 Sonic Yellow, not the '02 Blaze Yellow. I have included the paint code in my order comments.

Furthermore, you state above that shipping is expected to commence mid-June, but in the first post you state that it will commence mid-July. Which is it?

Dave

We will personally call for the remaining balance.

Sorry for the typo. As stated in the initial page of the Group Buy

Delivery
- Shipment of cf lips expected to arrive 5-6 weeks after end date (approximately mid July 2003) and delivery will commence thereafter


Mid July, not June. I apologize for the typo.


However we are trying our best to make sure everyone gets their correct color codes and and production have started already.


Thanks again,

O.E. Tuning

Originally posted by O.E. Tuning
Delivery - Shipment of cf lips expected to arrive 5-6 weeks after end date (approximately mid July 2003) and delivery will commence thereafter

Thanks again,

O.E. Tuning Eek... I am counting on it being here in time for me to install it prior to July 19th!! (Hot Import Nights) not too worried though, you posted here once that there would be no problem meeting that deadline..

Why such a long delay? It seems kind of long, even for custom stuff?

Originally posted by HiFiWRX
Eek... I am counting on it being here in time for me to install it prior to July 19th!! (Hot Import Nights) not too worried though, you posted here once that there would be no problem meeting that deadline..

Why such a long delay? It seems kind of long, even for custom stuff?


Hello,

There is no delay. As the intial terms of this group buy was for delivery for mid-July ( please refer to page one ) . Typing mid-June was a typo.

Different colors does make production time longer as different color pieces need to be color coded and painted individually, instead of painting 5 lips in silver at one particular time.

As stated earlier, production has begun and we should be able to ship the items earlier. :)


Thanks again.

O.E. Tuning

Originally posted by O.E. Tuning
Hello,

There is no delay. As the intial terms of this group buy was for delivery for mid-July ( please refer to page one ) . Typing mid-June was a typo.

Different colors does make production time longer as different color pieces need to be color coded and painted individually, instead of painting 5 lips in silver at one particular time.

As stated earlier, production has begun and we should be able to ship the items earlier. :)

Thanks again.

O.E. Tuning No, No sorry.... I didn't mean there was a delay from your original stated time frame! I ment why is it taking so long to begin with? It just seemed like kind of a long time to get the lip, even as a custom piece.

End date of June 8th then 5-6 weeks for production then delivery, so in reality we are looking at a wait of 7+ weeks or so from payment to receving the part...

That's a pretty long wait know what I mean? Just wondering if they are imported or if they are all built on demand or what the scoop is on the long process? hehe Sorry I am just nosey (and maybe a little impatient ;) )

I am not too worried because of this:
Originally posted by O.E. Tuning
You will recieve the lip for sure by July 18th. Please excuse for our absence in telephone calls as we are mostly away this month preparing for some shows and events. If you do get the machine when you call please leave a message as someone will get back to you shortly. :D

I am at awork and can't call long distance but I will call in and pay off my balance tomorrow!

Thanks!

Originally posted by O.E. Tuning

as stated earlier, production has begun and we should be able to ship the items earlier. :):D :D :D
That would be SWEET!!!

Not a problem. Thank you for your prompt reply.

O.E. Tuning CF lips are made to order basis only. We do not manufactuer our items here in the U.S.


Thanks again,

O.E. Tuning

Thank you! Final GB list:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black ( Thank you for full payment )

3. LGKAHN
color: red ( Thank you for full payment )

4. DIGITALTEKNIQ
color: silver ( Thank you for full payment )

5. Dragon7606
color: silver ( Thank you for full payment )

6. lianregnif
color: silver ( Thank you for full payment )

7. chobits
color: aspen white ( Thank you for full payment )

8. Schleppy
color: silver ( Thank you for full payment )

9. quasi888
color: yellow ( Thank you for full payment )

10. HiFiWRX
color: blue ( please pay balance by June 8th )

11. Rally Punx
color: blue ( please pay balance by June 8th )


Group Buy has ended. Please visit our website if you are interested in this product. ( http://www.oetuning.com )

Please check your emails for remaining balance payment.

CF Hood Groupbuy will start shortly.

Originally posted by O.E. Tuning
Not a problem. Thank you for your prompt reply.

O.E. Tuning CF lips are made to order basis only. We do not manufactuer our items here in the U.S.


Thanks again,

O.E. Tuning Ahhh See that makes sense then! I figured that maybe they were from outside the US hence the wait... Can't wait to get it! I'll try to get my payment in today but I got called into work again so No ling distance :( I will have it in by the 8th NO problem ! :D thanks again for the reply!

MFER! I forgot this group buy was up... damn. OE, what's the estimate (time to delivery/cost) if I order a one off with high end CF?

Sergi

Originally posted by gellar
MFER! I forgot this group buy was up... damn. OE, what's the estimate (time to delivery/cost) if I order a one off with high end CF?

Sergi

Hello Sergi,

Please visit our website for direct ordering ( www.oetuning.com ) and more info about time delivery / cost.

Thank you.

Called a couple times to pay my balance... got a machine... left a message...

I think it would be easier if I could get a link to pay by...

Email me at hifiwrx@aol.com

Thanks!
Jeff

have you already paid a deposit? try this one http://www.oetuning.com/oe-shop.asp?category=GroupbuyBal

Originally posted by DragII
have you already paid a deposit? try this one http://www.oetuning.com/oe-shop.asp?category=GroupbuyBal Thanks, I never got a call back so I used that link, hope it goes through allright!! :confused:

Thank you! Final GB list:

O.E. Tuning OFFICIAL LIST:

PLEASE CLICK HERE TO MAKE A PAYMENT / DEPOSIT (http://www.oetuning.com/oe-shop.asp?category=Groupbuy)
* Please include your NASIOC forum name when making a payment / deposit.

-----------------------------------------

1. REVUMBRA ( Thank you for full payment )
color: blue

2. DRAGII
color: black ( Thank you for full payment )

3. LGKAHN
color: red ( Thank you for full payment )

4. DIGITALTEKNIQ
color: silver ( Thank you for full payment )

5. Dragon7606
color: silver ( Thank you for full payment )

6. lianregnif
color: silver ( Thank you for full payment )

7. chobits
color: aspen white ( Thank you for full payment )

8. Schleppy
color: silver ( Thank you for full payment )

9. quasi888
color: yellow ( Thank you for full payment )

10. HiFiWRX
color: blue ( Thank you for full payment )

11. Rally Punx
color: blue ( Thank you for full payment )


Group Buy has ended. Please visit our website if you are interested in this product. ( http://www.oetuning.com )



CF Hood Groupbuy will start shortly.

anyway get their lip yet?
hows the quality and mounting.

Thanks,
Mike

we won't get it until mid of july

So what happened to the CF hood GB? Im still waiting on that one.

Chris

myself and about 5 people i know are waiting for the cf trunk gb as well, please, summer is almost over !

tick tock tick tock




^^^

We are still finalizing the details for the CF hood gb.

Thank you.


O.E. Tuning

Originally posted by O.E. Tuning
We are still finalizing the details for the CF hood gb.

Thank you.


O.E. Tuning


Awesome... sorry for buggin ya.. but Im stoked about this hood! Ive got several digital cams so I will def post up pics once I get it on.

Thanks for the response guys. :D

Chris

if you ship the item, can you give us the tracking number
when will you ship it out ?

when r u guys coming out with the trunk

I have sent you emails. i was wondering if i could buy the lip unpainted and have it shipped to longwood, fl 32750
thanks
Andy

any updates? or are we still looking at mid july eta?

Yeah, just wondering if there were any updates on the status of the lips...

Thanks!

-S

**GDCFLIP gb is officially closed**

Originally posted by Schleppy
Yeah, just wondering if there were any updates on the status of the lips...

Thanks!

-S

Originally posted by DragII
any updates? or are we still looking at mid july eta?

Lips are being painted as you are reading this. mid-July is still the eta, however we do expect the lips a few days earlier :)

Originally posted by chobits
if you ship the item, can you give us the tracking number
when will you ship it out ?

You will recieve a tracking number via email once the package has been shipped.

Originally posted by sc00by25rs
I have sent you emails. i was wondering if i could buy the lip unpainted and have it shipped to longwood, fl 32750
thanks
Andy

Hello Andy. Please check your email, if you have any further questions please email sales@oetuning.com


Originally posted by slammedWRX
when r u guys coming out with the trunk

O.E. Tuning CF trunks are not currently available for the end user market. Will be available soon.

Originally posted by Subie2



Awesome... sorry for buggin ya.. but Im stoked about this hood! Ive got several digital cams so I will def post up pics once I get it on.

Thanks for the response guys. :D

Chris

O.E. Tuning's CF hood gb is finally here!

Please click here for more info:

http://forums.nasioc.com/forums/showthread.php?s=&threadid=381474

dont suppose your gonna run another group buy on the lips ......in the forseeable future?????

Originally posted by wolf8314
dont suppose your gonna run another group buy on the lips ......in the forseeable future?????

Next Group buy for these lips will most likely be for the WRX wagons. Another GB for these lips probaly won't be scheduled for awhile.

However, all items can be purchased direct at ( www.oetuning.com )

Thanks


- O.E. Tuning

Originally posted by O.E. Tuning
Lips are being painted as you are reading this. mid-July is still the eta, however we do expect the lips a few days earlier :) Soooo I can still expect to get my lip in time to install it for Hot Import Nights on the 19th then?? (so at least a few days earlier as I "roll in" for the show on the 18th at 2PM

:D <----Fingers crossed, praying for a "YES" I assume it will be, since you said that prior to taking my money hehe... I can't wait!! :p

Also, is there instructions for mounting somewhere or are they included with the lip and how about hardware? and modification? Is the Hardware included or referenced so we can find it easily and is there any drilling or cutting involved?

Trying to prep beforehand incase there is a crunch before HIN :D

Thanks!!

Originally posted by HiFiWRX
Soooo I can still expect to get my lip in time to install it for Hot Import Nights on the 19th then?? (so at least a few days earlier as I "roll in" for the show on the 18th at 2PM

Also, is there instructions for mounting somewhere or are they included with the lip and how about hardware? and modification? Is the Hardware included or referenced so we can find it easily and is there any drilling or cutting involved?



Ditto, Same here :D

Hope everything is going well with the front lips!! HIN is fast approaching! :D Oh and OE did you get my email about the ShowI Am putting on in August? :D

Let me know about both!

There has been a little suprise at the door for some selected colors. ;)

Blue & silver lips will be dispatched within a week or two from today.

We will try to post some kind of installation instructions, but it is a very straight forward installation with double sided tape and 2 pre-molded screw holes to fit the factory screws in the fender.

HiFiWRX you should be able to receive the order in time for your show. To ensure prompt delivery, we will make a note of it on your order. As to your other question, we will not be able to support your event as we are scheduled for many events this summer.

- O.E. Tuning

what about white :(

WOOHOO!

Came home from a weeklong vacation in SoCal to find my sonic yellow lip waiting at my door! :)

I've just installed it. First impressions:

- Weight: LIGHT LIGHT LIGHT!

- Structural quality: Seems strong enough. One of the corners was a tad rough.

- Paint job: color match was close enough; quality was, hmmm, average.

- Installation: A cinch. The lip includes double sided tape in 3 locations. Juts peel of the backing. If you want to use the plastic pop rivet that is already on each fender, just drill/dremel out a hole on the lip -- the location is conveniently pre-marked.

- Appearance: Definitely makes the front end more aggressive. Love the exposed CF center section.

- Issues: Well, it hangs about 2-3" below the bumper, and my rex has Prodrive lowering springs. I decided to drive the car straight up my moderately-inclided driveway, fully expecting it to scrape, and sure enough, it did -- BIG TIME. A big chunk of the lip's underside now has a huge gash, with raw fibers exposed. OUCH! But if I angle the car into the driveway, it does not scrape. Perhaps the bigger concern is that when it scraped, the inside edge of the lip managed to scrape up the original bumper a bit, too. I'm going to have to go over the small bumper scrapes with some touch-up paint. Again, I fully expected scraping, especially with my Prodrive-lowered car, and you can't fault OE Tuning for this -- it's just a replica of an existing design after all. (But of course, it doesn't diminish the pain of seeing a huge gash in a brand new lip I paid $450 for! :( )

Dave

how about red... any word on my lip

thanks

Originally posted by O.E. Tuning
HiFiWRX you should be able to receive the order in time for your show. To ensure prompt delivery, we will make a note of it on your order. As to your other question, we will not be able to support your event as we are scheduled for many events this summer.

- O.E. Tuning good to hear!, I understand the show part too, Maybe next year! ;) You could always include some OE tuning Stickers with my lip so I can at least get your name out there! lots of people LOVE stickers... Thanks for the update!

I can't wait to get mine!!

Any tips on how to avoid scratching up the OEM bumper underneath the lip? I remember I installed a CF V1 front lip onto my rex and it put very fine scratches on the outer sides of the bumper... Or is this lip sanded smooth on the edges?

Thanks!

-Sean

I've got a real STi v2 front lip and what I did just to be safe was sand some of the edges where I saw that the lip itself could actually touch the bumper otherwise the only thing that touches the bumper was the double sided sticky tape.

Be very careful and try to go up and down drive way at an angle, trust me you will have too, because i had the lip on my car for the pass 5 month and some time it doesn't matter what you do it still going to be scratch, but luckly it is only on the underside. You really don't have to worry about the middle section, but the sides are going to get it the most. Hopefully this will help, drive carefully guys.

Joe

OK, finally some pics. Yeah yeah, I know i really need to get those side skirts painted now:

http://www.structive.com/wrx/newimages/IMG_0003.JPG

http://www.structive.com/wrx/newimages/IMG_0005.JPG

http://www.structive.com/wrx/newimages/IMG_0004.JPG

^ ^ ^

Looks sick!

hello quasi888,

Looks very nice. Yellow was the hardest color to match and paint.

you wouldn't need to paint your side skirts as O.E. Tuning CF ones will be coming out shortly. ;)

----------------------------

All blue & silver lips will receive a tracking number once its shipped.

If you like, you can email me us at sales@oetuning.com and we'll add your picture to the gallery section of our website.

Thanks again,

O.E. Tuning

Man, that bites. You would figure the blue one would be the first one to come out. I can't wait to get mine (hopefully soon). 2 weeks seem so far away!!!! :( :(

Originally posted by O.E. Tuning
you wouldn't need to paint your side skirts as O.E. Tuning CF ones will be coming out shortly. ;)


Well, gee. How long is it gonna be before you have those skirts available? I don't know how much longer I can bear the unpainted skirts:

http://www.structive.com/wrx/newimages/IMG_0006.JPG

Ugh!

Dave

DAVE,

how many inches is your car dropped?

tks
ben

w00t!!! got mine today, right as I come home from vacation...nice welcome home present! it is VERY light...I'll get a better look at it, mount it, and take some pics later on today.

thanks oe tuning! :D

Originally posted by O.E. Tuning
hello quasi888,

Looks very nice. Yellow was the hardest color to match and paint.

you wouldn't need to paint your side skirts as O.E. Tuning CF ones will be coming out shortly. ;)

----------------------------

All blue & silver lips will receive a tracking number once its shipped.

If you like, you can email me us at sales@oetuning.com and we'll add your picture to the gallery section of our website.

Thanks again,

O.E. Tuning haha GREAT! So Now I am looking CF at skirts too... I am already planning on the CF hood, and either the CF trunk OR a new CF STi rep spoiler to replace the one I have now.... (I want all my CF to match quality wise)

Question on the side skirts. Are they going to be "oem style" CF and partially painted like the lip or a different skirt design or what?

I would suggest that you design a skirt that would maybe fit with the V2 lip design a little better ;) Since the lip has the part that sweeps up on the side at the fender well it doesn't really match that well with the OEM skirt... I think something that would kind of blend in style wise with the front lip would be AWESOME! I'll photochop something a little later this weekend... I was thinking maybe someone could incorporate the V2 lip style "vents" at the back part of the skirts to continue along the same style lines.... Just a thought. but I think it would look AWESOME! :banana:

Originally posted by 516_WRX_V2
DAVE,

how many inches is your car dropped?

tks
ben

Prodrive springs drop the front about 1.5" and the rear about 1".

Originally posted by DragII
w00t!!! got mine today, right as I come home from vacation...nice welcome home present! it is VERY light...I'll get a better look at it, mount it, and take some pics later on today.

thanks oe tuning! :D

Thank you again for your business. Hope to see your pictures very soon.

--------------------------------

Most likely side skirts will be modified or retained oem-style look. Design will be produced to match O.E. Tuning's limited 2 style front lip.

EST for side skirts will be late august.

again thanks for participating in this group buy.

Please email sales@oetuning.com to have your picture posted in the gallery section on our website.


Have a great weekend everyone.

- O.E. Tunining

I recommend the c-west style side skirts.. that sweep up in the back that matches the lip very well. and this loop looks a lot like the cwest one.

I would be interested in a red one..

any idea on price

I have been getting compliments left and right on this lip. the quality is awesome, and the paint matched perfect. If anyone is still on the fence about this product...I'd highly recommend it....it's a work of art!

Sorry about the delay in pics, my digicam is on the fritz :mad:

I'm borrowing a friends, and should have some stuff up tomarrow night. :D

unfort. my paint did not really match at all.
the red is quite a bit darker than the rest of the car.. I don't think it is fading since I just had some other stuff repainted and it matched fine...

Not sure if I am going to leave it on or not since the color is so far off..
bummer.

Still No Tracking number....

Still No lip.... ??

HIN Roll in on Friday....

Thursday install day = 3 days and counting....

:huh:

this is mid of july already
where is your promise?
i just can't be patient anymore ........

Did i miss the GB?

I'm in with HiFi. Where are the tracking #s???

Yes I would like to know also! :mad:

Mjr

Lips arrived on the 14th

All blue lips have been shipped, the system should've already sent a tracking number for the blue lips. Please email us if you have not received your tracking number.

Silver lips are still being prepped and packed. For the silver lips, you should receive a tracking number within 24hrs.


----------------------

Chobits,

We've already talked on the phone. Your O.E. Tuning Limited 2 lip should be waiting for you already ;)

----------------------
HiFi,

As promised in our email, we made sure you will receive your lip in time before the show and upgraded your shipping, free of charge to, 2nd day air. You will receive your lip by the time of your show.


Originally posted by lgkahn
unfort. my paint did not really match at all.
the red is quite a bit darker than the rest of the car.. I don't think it is fading since I just had some other stuff repainted and it matched fine...

Not sure if I am going to leave it on or not since the color is so far off..
bummer.

All paint was done by the color code specified at the time of order. Unfortunatley we did not have your car for an exact color match. Weather conditions will change the color of your vehicle over time. Paint should be 95% matched if the correct color code was given.

Originally posted by DragII
I have been getting compliments left and right on this lip. the quality is awesome, and the paint matched perfect. If anyone is still on the fence about this product...I'd highly recommend it....it's a work of art!

Sorry about the delay in pics, my digicam is on the fritz :mad:

I'm borrowing a friends, and should have some stuff up tomarrow night. :D

Thank you hope to work with you again shortly.


Again if you have any further questions feel free to contact us.

Hope to see everyone's awesome pictures soon!

- O.E. Tuning

So I guess that is a yes on missing the GB.

the GB is already ended at the end of June ........
maybe, it's been a while

Originally posted by O.E. Tuning
Lips arrived on the 14th

All blue lips have been shipped, the system should've already sent a tracking number for the blue lips. Please email us if you have not received your tracking number.
------------------
HiFi,

As promised in our email, we made sure you will receive your lip in time before the show and upgraded your shipping, free of charge to, 2nd day air. You will receive your lip by the time of your show.

Thank you hope to work with you again shortly.

Again if you have any further questions feel free to contact us.

Hope to see everyone's awesome pictures soon!

- O.E. Tuning Sorry to be so impatient! You have mail! Can't wait to see it! Oh and I am still planning on aCF hood and CF skirts down the road a bit.... :banana:

when O.E. Tuning called me reagrding i haven't got my front lip, i was happy with your customer service
but when i get the stuff, i'm really dissapointed

IT'S CRACKING THAT BIG AND THAT LONG ON THE MIDDLE PART (the carbon fiber part)

please be responsible, i know customer service is your no.1 priority

oh one more, i don't think what i pay is worth with what i get.
the fiberglass material is so thin

it looks nice indeed, but very thin ....

Glad I waited on this one. I'd never seen anykind of product put out by this company so I was a little scepticle at $400. I guess I'll have to wait for a few more opinions.
Ryan
:rolleyes:

Before anyone goes insane here, let's keep in mind how brutal shipping can be. I've seen boxes arrive to my door that look like they'd been through a war. Anything subjected to your standard UPS shipping could easily crack, even CF...

Give O.E. a chance here...

I saw a set of JDM rain guards in a box folded in half then ducktaped together. It even had the "handle with care" picture on it too. :lol:

Originally posted by Schleppy
Before anyone goes insane here, let's keep in mind how brutal shipping can be. I've seen boxes arrive to my door that look like they'd been through a war. Anything subjected to your standard UPS shipping could easily crack, even CF...

Give O.E. a chance here... I agree here, they seem to be very helpful and willing to work with people... We'll see when and if my lip gets here, there seems to be some sort of error with the tracking number I got.

easy for you to say something like that
what would you feel after you spend $400 and wait for around 2 months to get ***** like this huh?
this is not happening to you, if this is happening to you, i don't think you will say the same thing

I am not going to jump the gun on this and will wait. My lip arrives today and I will see how it looks and the quality. Shipping can be brutal. Hell my scoobysport muffler box arrived literally was crushed with the flange sticking out of one end. Thank god the muffler inside is stainless and had no problems. **** happens with shipping and you might want to bring this up with UPS as well.

i already email and report this **** to UPS
how much this thing is insured?

----------------------------

HifiWRX,

Please check your email for another tracking number.


------------------------------


Originally posted by chobits
easy for you to say something like that
what would you feel after you spend $400 and wait for around 2 months to get ***** like this huh?
this is not happening to you, if this is happening to you, i don't think you will say the same thing

hello chobits,

We have called you earlier and no one picked up.

After checking with UPS and your tracking number, this is what we got.

first attempt delivery was made on 6/11
second attempt made on 6/14
third attempt made on 6/15
final delivery was made on 6/16 - received.


UPS has made 4 attempts total to deliver the CF Lip to your location. CF Lip has been in and out of the UPS truck for one entire week, being shoved, tossed around, and extensive abuse. If you see how UPS handles their products, who knows what they'll do when no one is around. We really don't have any control of how UPS handles our packages, especially being in their hands for almost one week.

Your replacement has already been ordered and we'll get you another one ASAP.

As for the two month wait, please do understand this was the initial terms of this group buy.

Since other satisfied O.E. Tuning customers have received this product in the same exact packaging and shipping method, we are sure that our carrier is much at fault, and not O.E. Tuning's craftsmanship.

We do understand your frustration of receiving a damage product from our carrier. We'll work with you personally to resolve this situation as quickly as possible and make sure you'll be as satisfied with O.E. Tuning as our customers have always been.

Please accept our sincerest apologies on this matter as our carrier's etiquette in handling our products are never up to par.


Thanks again everyone for this great opportunity to work with you.

- O.E. Tuning

i'm sorry for being rude to you too
all i can say about O.E. Tuning is that they have an awesome customer service

Holy batcrap that is good customer service.
For a company to order you a new one without receiving the old one back yet just on the concerns of a unsatisfied customer is unheard of.
I get mine today, and with that type of service I literally have no worries at all.
GJ OEtuning.

In defense of OE Tuning, I would say that the gorillas at UPS certianly aren't known for their care in package handling. My lip arrived with a big gash in it too, but fortunately the lip was fine.

That said, I think OE could stand to do two things: (1) do a better job packing the lip (stiffer box, and/or filler material like styrofoam peanuts), and (2) improve the paint quality. After a week of use, my lip is showing micro cracks in some parts of the paint finish, and every day or two I find tiny (1/16") spots that have chipped off, that I need to apply touch up paint to. I'm sure I will soon get tired of doing this every few days. The paint finish is certainly not OEM quality.

Overall, am I happy with the lip? Yes. Do I feel it was worth the $450+ (includes tax, shipping, and surcharge for Sonic Yellow)? That is questionable.

- Dave

Originally posted by chobits
i'm sorry for being rude to you too
all i can say about O.E. Tuning is that they have an awesome customer service

No need, it wasn't your fault. We understand your frustrations and will get this issue resolved asap.

Originally posted by revumbra
Holy batcrap that is good customer service.
For a company to order you a new one without receiving the old one back yet just on the concerns of a unsatisfied customer is unheard of.
I get mine today, and with that type of service I literally have no worries at all.
GJ OEtuning.

Thank you. Hope we can see your pictures shortly.

Originally posted by quasi888
In defense of OE Tuning, I would say that the gorillas at UPS certianly aren't known for their care in package handling. My lip arrived with a big gash in it too, but fortunately the lip was fine.

That said, I think OE could stand to do two things: (1) do a better job packing the lip (stiffer box, and/or filler material like styrofoam peanuts), and (2) improve the paint quality. After a week of use, my lip is showing micro cracks in some parts of the paint finish, and every day or two I find tiny (1/16") spots that have chipped off, that I need to apply touch up paint to. I'm sure I will soon get tired of doing this every few days. The paint finish is certainly not OEM quality.

Overall, am I happy with the lip? Yes. Do I feel it was worth the $450+ (includes tax, shipping, and surcharge for Sonic Yellow)? That is questionable.

- Dave

Hello Dave,

Thank you for your support. As for minor cracks, could this have been caused after the slight incident you had on your driveway? It's like a shock wave that just rides out and eventually leave these little micro cracks you're addressing.

There has not been any chipping on our project vehicle, just the normal chips from a trip to Vegas I believe. We will look into our packaging and further improve it.

As for tax and surcharge for your color, could this have been easier if you lived in the state over and drove a blue wrx instead? ;)


We greatly appreciate your comments as we can only improve from direct end user feedback. Your comments and concerns will only bring O.E. Tuning's products and services to an even greater level.

Thank you.

- O.E. Tuning

OE TUning,

Your points are well taken. I mention the tax and paint surcharge only because others might be confused at why I probably paid more than them...it was nothing against you.

The chipping has nothing to do with the packaging, it is occuring on a near-daily basis from normal freeway driving. And I actually noticed the micro-cracks even before I started the car and pulled out of the driveway. (I didn't mention this specifically in my very first post, but it is the reason why I described the paint quality as "average".) Furthermore, the paint layer is noticeably thinner at the top edge where the lip meets the bumper; the dark color of the raw lip shows through. So, in my mind, all 3 of these things point to deficiencies in the paint quality. Maybe it's my lip only; maybe the painter was irked at having to mix a batch of paint for a one-off color and did a less-than-ideal job painting it; maybe the yellow paint you use is thinner than the paint you use for other colors; who knows, perhaps we will never know, I can only make observations.

Again, in general, I am satisfied with the way it looks (I can't help but look back at my car every time I park and walk away from it!), and the fit was good. These are my observations, and I was aware of the risks inherent in purchasing from a new (to the NASIOC community at least) company with a new product, and I will live with my decision. I think it's a decent product, maybe there are a few kinks in your production and shipping logistics, but you are obviously a company that tries as much as possible to keep your customers happy, and for that I commend you.

Dave

P.S. As further evidence of my overall general satisfaction and confidence in you, when will the sideskirts be available? You had mentioned late August, but it wasn't clear if that's when you would start taking orders, or if that's when the lips would ship. Estimates on pricing?

I for one am impressed with the quality, of both the lip, and the paint. I have had no problems so far, and have driven a bunch of highway miles in rain, and wind.

OE Tuning, I haven't received a tracking number yet!! Can you please e-mail me the number.

Ok I got mine on.

1. The fiberglass is very thin. I don't see this as too bad of a thing though as it mounted just fine.

2. Paint job wasn't really oem quality, as I had pock marks on near the bolting points to the point that I literally had to fill them in with touch up paint 2 times. The rest of the paint is perfect though and the match is good.

3. It looks good..really good.

Is it worth 400 dollars, well it is a hard question to answer really. I am still up in the air with that one. I think a little more care in painting and it would be easily worth it.

Just trying to be honest here, but it does look good on my car.

OE Tuning,

Thanks for the new tracking number, that one makes a whole lot more sense! Also, thanks for calling me to let me know you took care of it, I don't think a call was even necessary and the fact that you went out of your way is very very nice to see!

the lip (according to UPS) should be here tomorrow, unfortunately my "roll in" at HIN is at 2pm an hour north of my house and the UPS guy usually gets to my place at 3pm :( so even with the 2nd day air upgrade it's a few hours too late...

I will say this, I appreciate all you have done to try to get this to work out for me, I take some of the blame as I read in the original GB that the wait was considerable and the approximate shipping time was RIGHT now... So I don't blame you 100% for it not getting here in time... That was a risk I took... It will be here for my own show in August so that I am happy about...

I too would like to know about the CF skirts and will be contacting you shortly about the hood GB as well, given the level of the Upgraded CF on the lip is to my liking!

Overall I would say OE Tuning has done what it said and has been more helpful than alot of other NASIOC vendors who don't return Emails or calls or anything! ;)

OE tuning....

I have been in China the last 10 days and don't return until the 21st. I have not received a tracking number from you yet so I'm guessing you haven't shipped my lip out.

If at all possible and not to much trouble if you could delay the shipping to my lip to where it arrives on the 21st or later that would be appreciated. I don't want ups to keep on trying to deliver my lip to my house when I'm not there and risk my lip being damaged.

OE Tuning,

I still haven't received a tracking number, or a reply to my e-mail, and you won't answer your phone. Can you please let me know what's going on with my lip :furious: :furious: :furious:

HiFiWRX,

Thank you for your comments. We regret seeing that your lip will arrive a few hours late then what you have planned. However, 2nd day air should arrive by 12pm? and not the regular scheduled delivery times. If the lip still does not arrive in time for your scheduled show, please contact us as we will work with you on an O.E. Tuning part, at partial-sponsorship discount.

lianregnif,
Please email sales@oetuning to schedule a delivery date that is best for you.


Rally Punx,
Please check your email as we have a few questions that need your assistance.

Thank you quasi888 and DragII for your comments and continue support.

We will be posting details of the side skirts as soon as the prototype has been installed and tested. Expect to see something around late august.

--------------------------

As for the issues of paint. The lips that have already arrived will be stripped of their paint and re-painted here locally to ensure the best quality possible. Hoping to receive "excellent quality" instead of satisfactory. We will be paying close attention to the details that were considered an issue.

For the ones that have already been shipped and installed. O.E. Tuning will be offering you a $25.00 discount towards any O.E. Tuning group buy of your choice.

Thanks again everyone for your kind support. Your kind feedback is the best support any company can ask for.


- O.E. Tuning

That's what I call customer service! What other company would hold a set of lips JUST to get a higher customer service rating?

I know who I'm getting all my CF stuff from in the future...

Thank you revumbra


http://www.oetuning.com/gallery/subaru/cust022a-ns-1.jpg

http://www.oetuning.com/gallery/subaru/cust022a-ns-2.jpg

http://www.oetuning.com/gallery/subaru/cust022a-ns-3.jpg


if you like your car added to O.E. Tuning's gallery, please send a few high res pictures to sales@oetuning.com

Thank you.

- O.E. Tuning

Originally posted by O.E. Tuning
HiFiWRX,

Thank you for your comments. We regret seeing that your lip will arrive a few hours late then what you have planned. However, 2nd day air should arrive by 12pm? and not the regular scheduled delivery times. If the lip still does not arrive in time for your scheduled show, please contact us as we will work with you on an O.E. Tuning part, at partial-sponsorship discount.

--------------------------

As for the issues of paint. The lips that have already arrived will be stripped of their paint and re-painted here locally to ensure the best quality possible. Hoping to receive "excellent quality" instead of satisfactory. We will be paying close attention to the details that were considered an issue.

For the ones that have already been shipped and installed. O.E. Tuning will be offering you a $25.00 discount towards any O.E. Tuning group buy of your choice.

Thanks again everyone for your kind support. Your kind feedback is the best support any company can ask for.


- O.E. Tuning Well it arrived today, I was under the impression that it would be coming at the normal time so I actually left 1 hour before it got here... :( BUT... I am taking it to the show and can hopefully install it prior to them letting the public in... :D Nothing like last min prepping...

Now as for quality... I will say this, I have seen tons of Fiberglass and CF parts and this is 100% worth the $400! I have paid more for parts that weren't nearly this quality level so as far as "quality" and How it was painted, I am pretty happy with it... The paint isn't the best in the world but I have seen worse. on a scale of 1-10 (10 being the best) I would say the build quality is an 8+ and the paint is probably an 8 (and I don't give or very rarely give 10s ;))

Would I recommend OE Tuning to someone else? ABSOLUTELY! (and I already have!) Their willingness to work with the customers and make everything right goes a long way! Remember they are a relatively new vendor and as with any new product such as the V2 lip etc there will be some adjustments to make them into the best product available. I give OE tuning 2 big thumbs up and will be getting in on the Hood GB and probably the Skirt GB when it happens too!

Good job OE tuning! (I will take you up on the discount though If it's still good, when I get my hood and or skirts ;))

:banana: Look for some pics as soon as I can get it on the car!! :)

Hey i was wondering if its possible if you guys make a OEM rear lip replica. I think alot of people would be interested in that.

i sure would be interested

O.E. Tuning,

I got your message on my cellphone and email - no worries - I'm not in any fierce hurry to install my lip given that I'm out of town this week ;)

Cheers

Rich aka digitaltekniq

thanks everyone for their kind support.

product ideas are always welcomed. more to come will be side skirts and possible a rear lip to match O.E. Tuning's limited 2 style cf front lip - more details will be posted as we move along. if you have any ideas, feel free to email us at sales@OETuning.com, if your idea works out, you'll be the first to prototype the product :)

here's some progress. all lips will be treated again before packaging.

http://www.oetuning.com/groupbuy/limited2/oe-g382.jpg

thanks again. we will be updating everyone and a tracking number will be emailed once the lips are sent out.

- O.E. Tuning

i already sent you the pictures of my crack sti v2 front lip
so when will i get the lip again? i'm just wondering
please do a better job on the packaging so that the lip won't crack anymore
if you have the tracking #, please give me one so that i can wait for the lip
the paint is excelent, but it's a bit off from the body color
it's not matching a bit

thanks a lot

:)

My lip is on and it fits pretty good, It was a tight fit around the wheel wells and the paint did get a little crack cause I was STUPID and tried to force something that shouldn't have been (and didn't need to be) forced ... **this was NO fault of OE tuning what so ever...

Anyway the cracked paint isn't noticable and the crack is really only about 1/8" long... :p

Here are a few pics...

http://forums.nasioc.com/forums/showthread.php?s=&threadid=394872

OH and the color match... It is as perfect as I have ever seen with this color!! It is the same or better than my Morette's, my side skirts or my fog light covers all of which you can not tell any difference on! 10 out of 10 on the paint match! So far the only part that I have gotten that was not a perfect match was my STi Hood Scoop... but even that is pretty darn close...

I only have 1 complaint about this lip, the little chrome OE tuning sticker that was on the lip... Well on mine it was crooked... It was about 2" to the right of center so I had to take it off cause I am anal about things being symetrical... If you mail me another one I would like to put it back on there! :)

PS OEtuning, I'll send you some HiRes pics in the next day or 2...

still can't wait to receive mine!

awesome!

i was wondering if my lip was ever sent? it was to be shipped to NM,and i've tryed calling but got no response.any info would be great