Hey everyone! We have put together a Awesome deal for you all. We have had a lot of customers ask for 4-point harness systems. We have joined up with Speedware and Sparco to bring you a solution.
The Speedware harness bar features all hand built stainless construction and electro polished finish. The Speedware harness bar allows the use of racing harness in your WRX without adversely affecting the car's "people mover" capabilities.
The resulting ride stiffens the center of the car allowing the WRX to handle much harder cornering loads.
The Speedware harness bar will fit in 2002-2004 Subaru WRX’s including the New STI. Installation is very simple and is a direct bolt in. There is no need to make custom parts. You will still be able to recline your seats. If your seat is all the way back on the rails, you will still have a few inches to recline.

Sparco 4-Point Harness system. This system will include full 3” competition harnesses with a cam lock system. Included is the 48” shoulder harness, the pull down lap belt and mounting brackets to attach the lap belt to the seat belt bracket. This will include evryting that you need to install the harness bar and the 4-point harnesses. These are Sparco’s top of the line harnesses and are SFI approved.
Available Colors: Red, Blue, and Black.

GROUP BUY IS CLOSED ! ! !

1. horshack - Package E - Black Harness
2. dorongo - Package B - Blue Harness - PAID 10/21/03 - Shipped!
3. Leonardo - Package B - Blue Harness - Camera Mount
4. JBETANC - Package A - Black Harness - PAID 10/21/03 - Shipped!
5.
6.
8.
9.
10.

If you have any questions please be sure to ask us. Thank you.

Nick
RallySport Direct
www.rallysportdirect.com
parts@rallysportdirect.com

where do the harness attach to? and where does the bar bolt to??

And I know this next question is wierd, but if I wanted to attach 4 pt harness in the rear, how would I go about doing so.

I do road rallies, and at times I have more than one navigator, and the one that needs the harnesses the most is the poor sap in the back.:lol: you should see them sliding along on the leather in the back of the WRX, while trying to hold on to maps and route instructions. :lol:

thanks for any info,
RR:D

Rapid_Roo - The harness attaches to the harness bar. This picture might help.

The harness bar itself attaches to the factory seat belt locaton on the b-pillar and down on the floor. There is a mounting bolt between the seat rail, and the b-pillar, underneath the carpet that the bottom of the harness bar attaches to.
As far as putting a 4-point harness in the back seat, I have never heard of it being done. One thing to remember when installing a harness system, is you need the harness to run straight off the back of the seat and connect to either a harness bar or a roll cage. If you fail to do this, it renders the harness useless.

thank you, that was very helpful.
RR:D

once installed, can you still move the seatbelt up/down?

Any chance of getting a package w/ a 5 pt harness?
Another thing...is that wise to have rear passengers with a harness bar installed?

Just a bunch of comments, cause I'm full of them for some reason this evening. :)

If you buckle up in the back seat, no worries. If you're worried about hitting something with rear seat passengers, then it might be to your advantage to put some padding on the top/backside of the bars or something.

Those are nice seats in the pictures... real shame they have TV's installed in them. :(

Looks like a very nice bar setup. Any chances of a shot showing how they're bolted to the seat belt mounts? And maybe the floor mounts as well?

what is the lap belt connected to?
thanks

dorongo - I'm pretty sure that you can. I will put a call in today and double check on that. I will se exactly where it mounts to on the b-pillar.

stirex - I had originally thought about putting in a 5-point harness with this, but to attach it to the wrx, you need to make a custom bracket that would run along the floor from seat rail to seat rail. If you didn't want to do that you have the alternative to drilling a hole in the floor and mounting it up that way.
Sparco's recommendation was not to run a 5-point if you can't have the sub belt run thought the seat. Either way, if you are interested, a 5 or a 6-point system can be added to the deal. Email me and we can work something out.

8Complex - I will work on some pictures.

dorongo - The lap belt connects to the seat belt brackets on the side of the seat. This is where the bolt in kit comes into play. You will mount the bolt-in bracket on the seat belt bracket and the harness will loop through the bolt-in bracket. I hope that this makes sense. I picture is worth a thousand words. I will see what I can do as far as pictures go in the next few days.

Nick

Let me be the first to sign up for Package B

Package B: $669.00 - Shipped!
(1) Speedware Harness Bar
(2) Sparco 4-Point Harness System (Driver and Passanger)


Package B: $612.00 - Shipped!
(1) Speedware Harness Bar
(2) Sparco 4-Point Harness System (Driver and Passanger)


Pleaes PM me on how and when you would like payment.

I'm in for package B (I also emailed you)

Do you guys just sell the bar alone? Already got myself racing harnesses already ..

Thanks,
Jin

horshack - Just sent off a PM with info.

dorongo - I got ya, let me know if you need anything else.

JIN - We can sell the bar alone. I sent you a PM with more information.

I did call Speedware today and they told me that the bar is easily removed in about 5 minutes once you have done it a time or two.
I'm still working on getting some pictures of the installed bar and of the harness. Let me know if you guys have any more questions.

Nick

Nick,

Could you PM me info for just the harness bar itself as well? This will fit an '03 wagon as well right?

Thanks!
Anh

is that a fire extinguisher mounted to the harness bar? can you get pictures of that as well? :)

this is waaaaayy too tempting to resist...

CRXguy - I just updated the information about the harness bar itself. It will for sure fit the wagon.

nqwan - I will poke around and see what I can come up with as far as pictures go. It is a fire extinguiser mount. Let me know if you have any more questions.

Nick

I might grab this as well!

Package B: $669.00 - Shipped!
(1) Speedware Harness Bar
(2) Sparco 4-Point Harness System (Driver and Passanger)


Any chance you can get camera mounts?


thanks!
Leo

Leonardo - I added you to the list. Let me know what color of harness want. The camera mounts we can also get you when you order up a bar. The camera mounts will be a additional 90.00 with freight included. I have been looking for some more close up pictures. I did find this one.

I hope this helps a little bit.

Nick

Cool, Put me down for a blue set and a camera mount.

Mind you I'm in Puerto Rico (00979)

Thanks,
Leo

Leonardo - I got ya taken care of. Let me know if you have any more questions. Thanks.

Nick

We need to get a few more peeps on this train. It closes in less than one week!

Nick

We are now accepting payments for the G.B. I have sent all of you P.M. regarding the payment information. If anyone lese wants to get in on this, we still have a few more seats available. If you have any questions, please be sure to let us know.

Nick
RallySport Direct

i think i want in on this but i have to see how the deal goes with the sti...should pick it up on friday..Thanks Tom

Originally posted by tm999xxx
i think i want in on this but i have to see how the deal goes with the sti...should pick it up on friday..Thanks Tom

You may want to hurry buddy the GB looks like it ends today.

BEN

tm999xxx - The group buy does end today. Please let me know asap if you want to get in on this. I have already shipped three bars to customers. Thanks for your interest.

bbbwrx - Thanks for giving the peeps the heads up.

The GROUP BUY ENDS TODAY! We still have plenty of slots open if any of you are still wanting to get in on this. We will require payment for this group buy on the 10/27/03. After that, the group buy ends! Thanks for all that participated in this!

Nick
RallySport Direct

If Speedware would get their isht together and make a reasonably priced bar, I'd buy it. Get rid of the stainless steel/electro polish and sell me a bar for 200 bucks.

GROUP BUY IS CLOSED!

Contact us if you have any more questions.

Nick
RallySport Direct

I know this is a really old post, but I'm having a really hard time understanding how to secure the lap belts ... can anyone please help asap as I don't have a seatbelt anymore, and I'd rather not have to re-install it because i'm stupid.