http://worldoneperformance.com/Sti/comp/Picture%20069.jpg

http://worldoneperformance.com/Sti/comp/Picture%20084.jpg

Project Mu USA was nice enough to set up the World One Performance STI with an awesome brake and rotor upgrade and now we are proud to bring this same upgrade to market for all of our customers.

NS Series Pads: Intermediate Sport Brake Pad Series:

NS Series Pads are the higher performance pad of the two offered in this post. They are intended for street and SEMI-Track yet since they are the more aggresive pad they will produce more dust and will squeek more than the B-force. Those who have stock STI brembos with stock pads should already be familiar with a good bit of squeeking however. The pads have OEM fitment and specificallyintended for use with the stock STI brembo Caliper.
And yes, the higher performance pads are the cheaper of the two offered. Pricing is as follows:

Fronts: 95.00
Rears: 85.00

B-Force Series: Non Asbestos Brake Pad Series

B-Force Series Pads are intened for all around use on the street. They are substantially more grippy then stock pads and are less dusty than the type NS. They will not bite as hard as NS's pads yet they will with certainly last longer. This is the pad that most daily drivers should be most intersted in, as they exhibit less squeeknig and dust than stock STi pads. For those who use their STI as a weekend auto cross, track warrior see the NS pad above. Pricing is as follows:

Fronts: 120.00
Rears: 112.00

Also Pictured SRC Competition Rotors. These Project Mu Rotors are slotted OE replacements. They have a two piece vented design and are only available in the colors shown.


http://worldoneperformance.com/Sti/comp/Picture%20086.jpg

When used in combination with NS pads like fitted on the World One STI you will experience substantial increase in braking force. The following components when used in combination with eachother are the

World One Stage I STI Brake Upgrade!!

For Pricing on SCR or SCP pro competition rotors as well as the World One STI Stage I brake upgrade please inquire within..

Thanks..

Garret
World One
www.worldoneperformance.com
info@worldoneperformance.com

World One Performance has partnered with Do-Luck USA to bring you some of the most sought after and hard to get parts for the GC8 Enthusiast. All parts shown are in stock and ready to ship to your door.

We begin with Do Lucks Absolutely Fabulous 3 piece body kit..

http://www.worldoneperformance.com/images/doluck/dlgc8.jpg

The three piece kit includes a complete front bumper, rear bumper lip and side skirts. Mounts like factory and come ready for paint!

Next is pair of Do Luck Suspension components, the rear ladders bars and rear differential support.

http://www.worldoneperformance.com/images/doluck/dflfsgc81.jpg

The Rear Ladders bars are 100 Stainless Steel and polished for an immaculate appearance, they come with instructions and hardware. The rear diff support is also 100% Stainless Steel and comes with aluminum bushings, hardware and instructions.

Next is Do Luck USAs orginal GC8 floor support bars. These bars dramatically strengthen the chassis of your GC8, and there is no part like it on the planet.

http://www.worldoneperformance.com/images/doluck/dlfsgc9.jpg

The Floor support bars are coated aluminum, and come with hardware and instructions.

Finally and in our opinion most impressive is the Do-Luck !00% aluminum one piece front strut tower brace. The weight on this brace is just above 3 lbs.

http://www.worldoneperformance.com/images/doluck/dlfstb.jpg

Prices are as follows:

GC8 Floor Support Bars: 375.00 shipped

GC8 Rear Ladder Bars: 189.00 shipped

GC8 Rear Diff Support Bar: 189.00 shipped

GC8 100% Aluminum 1 piece F STB: 299.00 shipped

GC8 Three Piece Body Kit: 1950.00 shipped

Hi there folks....

First and foremost I would like to annouce that all orders placed on www.worldoneperformance.com get a free T-shift in either blue and white or black and gold. World One Performance T-Shifts come in all sizes and are 100% cotton.

http://www.worldoneperformance.com/home/images/whiteshirtsmallest.gif

One catch, you order has to be placed onlnie using www.worldoneperformance.com's 100% secure shopping system.

In addition you will find a list below of some of the items that are in stock at the World One warehouse in ample quantities. Please note there is many products in the building not on the following list. Products from brands like cusco, rsr, exedy, zerosports, advan, recaro, and many more. The following list is simply a selection of available components. All items listed are on World One Performance.com Package pricing available and we price match.

Do Luck USA

GC8 Side Skirts
GC8 Rear Bumper
GC8 3PC Kit Type A (F/B w/o cover, r/b w/o wing
GC8 Floor Support Bar (steel)
GC8 Rear Ladder Bar
GC8 Rear Differential Support

Eibach

Eibach Pro Kit Springs Subaru WRX
Eibach Pro Kit for WRX Wagon
Eibach Front Camber Bolts 02+ WRX

Greddy

Greddy EVO Catback 02+ WRX
Greddy BOV Type-R with stiff spring
Greddy Type S BOV Kit For WRX
Greddy Universal Catch with 15mm Hose

Gaskets

Downpipe Turbo Gasket
Uppipe Turbo Gasket
Uppipe Manifold Gasket

GT SPEC

GTSpec Front Strut Brace (Hollow) 02+ WRX
GTSpec STi Replica Mesh Fog Covers
GTSpec STi Replica Front Grille
GTSpec Zerosports Replica WRX Front Grill
GTSpec WRX Carbon Fiber STi Front Lip
GTSpec Type-S Front Grill
GTSpec STi Replica Mesh Fog Covers

HKS

HKS Carbon Titanium Cat Back 02+ WRX
HKS Downpipe
HKS Uppipe

Turbos

IHI VF34 Turbo Charger

Invidia

Invidia Cat Back WRX 02+ Stainless
Invidia Downpipe Subaru WRX
Invidia Cat Back Exhaust Subaru WRX
Invidia One Piece Header with Uppipe

Kaminari

Kaminari 02 WRX Lip Kit
Kaminari WRX Race wing with carbon fiber blades
Kaminari 02 WRX Reverse Cowl Hood
Kaminari 02 WRX Reverse Cowl Full Carbon Fiber Hood
Front Airdam (urethane)
Kaminari 02 WRX Carbon Fiber One Piece Splitter
Karminari 02 WRX Sideskirts
Kaminari 02 WRX Rear Skirt

Perrin

Perrin Front Brake Kit Black for WRX
Perrin Front Brake Kit Red for WRX
Perrin Rear Brake Kit Subaru WRX
Perrin Crank Pulley Subaru WRX
Perrin Fuel Rail Kit Black Subaru WRX
Perrin Oil Catch Can Red
Perrin Oil Catch Can Blue
Perrin Radiator Shroud Subaru WRX
Perrin Uppipe Subaru WRX
Perrin Downpipe Subaru WRX
Perrin Cat-Back Exhaust System Subaru WRX
Perrin WRX 02 Simulator
Perrin Shift Knob Subaru WRX
Perrin Short Shifter Adaptor Subaru WRX
Perrin Panel Air Filter Subaru WRX
Perrin Short Ram Intake Black Subaru WRX
Perrin Short Ram Intake Blue Subaru WRX
Perrin Short Ram Intake Red Subaru WRX
Perrin Turbo Inlet Hose Blue Subaru WRX
Perrin Turbo Inlet Hose Red Subaru WRX
Perrin Intercooler Hose Kit Black Subaru WRX
Perrin Intercooler Hose Kit Blue Subaru WRX
Perrin Intercooler Hose Kit Red Subaru WRX
Perrin Front Sway Bar WRX
Perrin Rear Sway Bar Subaru WRX
Perrin Rear Sway Bar for STi
Perrin Rear End Links Subaru WRX
Perrin Springs Subaru WRX

Sparco

Sparco Torino
Sparco Lap Belt Black
Sparco Shoulder Harness Black
Hardware for Sparco Lap Belt
Sparco WRX Seat Brakets
Sparco Sliders for WRX
Speedware Harness Bar WRX 02+

STi

STI JDM Projector Headlamps WRX
STi 520cc/min High Impedance Injectors
PnP Harness for STI JDM Projector Headlamp
STi Engine Mount Pair, RH-LH.
STi Radiator Cap WRX
STi Transmission Mount

Turbo XS

TurboXS Blow Off Valve Type H
TurboXS Blow Off Valve Type H-RFL
TurboXS Cat Back Adapter Subaru WRX
TurboXS Catpipe Subaru WRX
TurboXS WRX Downpipe Subaru WRX
TurboXS Midpipe Subaru WRX
TurboXS Race Pipe Subaru WRX
TurboXS RFL-Ti Muffler Subaru WRX
TurboXS Magnaflow Muffler Subaru WRX
TurboXS Standard Boost Controller
TurboXS Remote Map Selector Subaru WRX
TurboXS Top Mount Intercooler Kit Subaru WRX
TurboXS Uppipe Subaru WRX
TurboXS UTEC ECU Subaru WRX
TurboXS Front Mount Intercooler Kit Subaru WRX
TurboXS High Performance Boost Controller
TurboXS Short Ram Intake Subaru WRX

Misc.

Apexi Auto Timer
Perrin Filter Cleaner Kit
Auto Meter Cluster Bezel Subaru WRX
FATT DC 2 Black
FATT DC2 Silver
Blitz Dual T/T/DC II Silver
Cusco Rear OvalShaft "OS" Strut Bar
Walbro Fuel Pump Set Up Kit
Walbro 255lph Fuel Pump
Duralumin Light Weight Locking Lugs 20 pcs
VIS Racing CF Hood 02+ WRX with scoop
Tein Flex Kit w/ Upper Mounts WRX
Tein EDFC for use with Flex on 02+ WRX
H and R Coilovers Subaru WRX 02+
Helix Cast Mouth Downpipe
KB Exhaust Hangers Set of 4
Kartboy Hangman Exhaust Hangers
Limix Linea BE5 RSK Wheel Impreza GD 02+

Thats all for now folks, please let me know if you have any questions or if there is anything else that we can do for you. Again, see www.worldoneperformance.com for pricing and get a free T-Shirt with your order. Inquiries appreciated.

DEALER INQUIRIES WELCOME

Garret
World One
www.worldoneperformance.com
206.331.2004

Do you sell the body kit for the WRX?? If so how much??


Milla

World One - Can you take some pics of where these suspension pieces would mount on a GC Impreza???

-mykr.

HI there...

You bet I sell the WRX kit, however they are not currently in my building. However the next batch of kits to hit US shores is headed right for our warehouse. There are two versions of the kit, one has Carbon Fiber elements and the other is full FRP. We will have many of both kits.

Price for the FRP kit is 1999.00 shipped

Price for the CF kit is 2375.00 shipped

Cheers,

Originally posted by mykrrrr
World One - Can you take some pics of where these suspension pieces would mount on a GC Impreza???

-mykr.

Yeah I wanna see specifically what the floor support bars look like installed as well as the rear diff support. You may have a customer.

http://www.do-luck.com/bar_imp_gc8.html#

as best i can tell the floor support bar attaches lenghtwise the entire lenght of the car, just inside the drip rail on either side of the car (on the underside) and stiffens the chassis front to back.

You dont, by any chance have the GC8 Do-Luck Fenders, do ya??

Andy

Will you sell just the rear lip? If so for how much?

http://www.do-luck.com/img/bar/imp/gc8.gif

Hi there..

The image that you have requested may be a bit tough to gather since these parts are new to the USA and we don't have a GC8 to fit the bars on to take a picture. However I will do all that I can do work one up for you.

Safirs description is almost right on, and I can tell you that it will make a substantial difference in chassis stiffness front to back. I have installed a similar brace on the STI and I can't say enough good things about it. More on that later however.

ANashTy...

I don't have the fenders in my building but they are within reach and are attractively priced. Send an email to info@worldoneperformance.com if you would like more information.

More Do-Luck Parts from World One Performance to come very shortly!

Cheers,

Im interested in DoLucks front fenders for the GC8, can you email me pricing?
Thanks

not the GC8 but here is a pic of a floor support bar installed i stole from trhe do-luck japan website.

i'm in for the ladder bars, diff support, and floor support, but it'll be towards the end of the winter.

Will you be carrying the braces for the WRX in the future. I would be interested in nearly all mentioned items(braces) minus the strut bar.

Thanks,
Eric

Hey Garret, would you shoot me an email.

Thanks.

J

Are the orange/amber signal lights included in the kit? And how much just for the rear lip like bluers has mentioned?

How much for the fenders?

id like to use them with a 22b style bumper...

Worldone-Do you plan on selling the WRX Aluminum subframe with lower arm bar? I've given up on another vendor that took the order, then kept trying to sell me the steel version they had in stock:rolleyes:
-Leland

Kaos..

The Front Blister Fenders are $549.00

Safir...

Thank you for the image Safir, I look forward to hearing from you!

Jeff...

You got it..

Kasio..

The Front signals are not included, and I haven't decided quite yet if I am going to be able to part out the rear bumper just yet. I will keep you posted. The decision to part out the kit gets a lot easier if I have a taker for a front bumper and the side skirts. ;)

Leland..

I have the brace you are refering to on my STI As we speak, its an awesome piece, and more to come on it later. Your answer is yes.

Cheers,

Throttle Body you say? Tell me more.

JC

Are the ladder bars and rear dif support one time thing or will you have in the future? Also would like to know more about the tb.

Worldone,
Please check your email

Thanks

It sure do look very nice kits but pricetag so so so so i not have money for it

Are you guys going to get the do-luck GC8 front grill(ƒI�[ƒiƒ�ƒ“ƒg‘ä�À
) in and how much?

World One,

This is what I've been waiting for! I was wondering when you guys would start carrying Do Luck ever since you posted the pics of your STi with the TCII's and the nice Do Luck strut bar!

I have two questions...I know that you guys don't have an upgraded TMIC on your STi, but would a something like the TXS TMIC fit with that strut tower bar on the STi? I'm really looking to get the Worx Tuning TMIC but I know you guys wouldnt know how the fitment would be since you dont carry Worx Tuning. My second question, is there a rear strut tower bar for the STi/WRX as well from Do Luck?


Thanks,

-STiLL

hi
I just wondering

GC8 Floor Support Bars: 375.00 shipped
GC8 Rear Ladder Bars: 189.00 shipped
GC8 Rear Diff Support Bar: 189.00 shipped

What did it do, and why should i use it. Do you have the body kit in stock? do you have Rear Under Wing too.
Thank

Originally posted by ChAi
hi
I just wondering

GC8 Floor Support Bars: 375.00 shipped
GC8 Rear Ladder Bars: 189.00 shipped
GC8 Rear Diff Support Bar: 189.00 shipped

What did it do, and why should i use it. Do you have the body kit in stock? do you have Rear Under Wing too.
Thank


from do-luck:
Floor Support Bar
This application is designed to stiffen the chassis for front to back movement. While strut bars stiffen the chassis for left to right movement the Floor Support Bars assist with stiffen the chassis for hard acceleration and braking.

Rear Ladder Bar
With the same principals as upper strut bars the Rear Ladder Bar was designed. This application helps to complement an upper strut bar to stiffen the chassis for lateral movements.

http://do-luck-usa.com//images/gallery/GC8_04.jpg

What are the fitmant issues without having 22b fenders. Have you installed them to the US cars to make sure they fit with no problems?

Do you have the body kit in stock and do you have Rear Under Wing too. I'm very interested in it can i go and check it out?
Thank

is there anyway of getting the reverse scoop. ive been waitng for one for a while. please pm if available.

What's FRP?

Yo Garret,

What about 2004 Carbon Fiber Hoods? Any ETA and price?

Thanks, Justin

Originally posted by LVSUBARU
What's FRP?

frp is fiberglass

Safir... thanks for answering that one

Tai...it fits, no problems

Chai... the carbon piece is not included we do have the FRP underwing

The hood is a prototype, we currently have the only one. Based on the response I would expect it hits production soon! Early pricing estimate is $1000 and no word on the reverse cowl.

Let us know if you want the Do-Luck pieces, there has been a lot of interst in these parts and the Cargo containers don't come everyday!

if you are interested send us an email at:

info@worldoneperformance.com

Cheers!

Originally posted by WorldOne
HI there...

You bet I sell the WRX kit, however they are not currently in my building. However the next batch of kits to hit US shores is headed right for our warehouse. There are two versions of the kit, one has Carbon Fiber elements and the other is full FRP. We will have many of both kits.

Price for the FRP kit is 1999.00 shipped

Price for the CF kit is 2375.00 shipped

Cheers,

When will you guys have the CF kit in your warehouse?


Milla

Milla....

I have two carbon fiber kits on route as we speak. I expect them to hit the warehouse floor, in about 10 days. Please let me know if you are interested as one FRP and one CF are already spoken for.

Thank you for your time!

Cheers,

World One

Here is an Update of what is left for the GC8:

2 Pairs of GC8 ladder Bars Steel
1 GC8 Diff Brace
1 GC8 Front Bumper
1 GC8 Floor Support Bars Steel
1 GC8 Rear Cross Bar Steel

First come first served basis..

Cheers,

WorldOne
www.worldoneperformance.com
info@worldoneperformance.com

Do you have any of these? I want a set

Any word on the TB?

Hi there folks....

First and foremost I would like to annouce that all orders placed on www.worldoneperformance.com get a free T-shift in either blue and white or black and gold. World One Performance T-Shifts come in all sizes and are 100% cotton.

http://www.worldoneperformance.com/home/images/whiteshirtsmallest.gif

One catch, you order has to be placed onlnie using www.worldoneperformance.com's 100% secure shopping system.

In addition you will find a list below of some of the items that are in stock at the World One warehouse in ample quantities. Please note there is many products in the building not on the following list. Products from brands like cusco, rsr, exedy, zerosports, advan, recaro, and many more. The following list is simply a selection of available components. All items listed are on World One Performance.com Package pricing available and we price match.

Do Luck USA

GC8 Side Skirts
GC8 Rear Bumper
GC8 3PC Kit Type A (F/B w/o cover, r/b w/o wing
GC8 Floor Support Bar (steel)
GC8 Rear Ladder Bar
GC8 Rear Differential Support

Eibach

Eibach Pro Kit Springs Subaru WRX
Eibach Pro Kit for WRX Wagon
Eibach Front Camber Bolts 02+ WRX

Greddy

Greddy EVO Catback 02+ WRX
Greddy BOV Type-R with stiff spring
Greddy Type S BOV Kit For WRX
Greddy Universal Catch with 15mm Hose

Gaskets

Downpipe Turbo Gasket
Uppipe Turbo Gasket
Uppipe Manifold Gasket

GT SPEC

GTSpec Front Strut Brace (Hollow) 02+ WRX
GTSpec STi Replica Mesh Fog Covers
GTSpec STi Replica Front Grille
GTSpec Zerosports Replica WRX Front Grill
GTSpec WRX Carbon Fiber STi Front Lip
GTSpec Type-S Front Grill
GTSpec STi Replica Mesh Fog Covers

HKS

HKS Carbon Titanium Cat Back 02+ WRX
HKS Downpipe
HKS Uppipe

Turbos

IHI VF34 Turbo Charger

Invidia

Invidia Cat Back WRX 02+ Stainless
Invidia Downpipe Subaru WRX
Invidia Cat Back Exhaust Subaru WRX
Invidia One Piece Header with Uppipe

Kaminari

Kaminari 02 WRX Lip Kit
Kaminari WRX Race wing with carbon fiber blades
Kaminari 02 WRX Reverse Cowl Hood
Kaminari 02 WRX Reverse Cowl Full Carbon Fiber Hood
Front Airdam (urethane)
Kaminari 02 WRX Carbon Fiber One Piece Splitter
Karminari 02 WRX Sideskirts
Kaminari 02 WRX Rear Skirt

Perrin

Perrin Front Brake Kit Black for WRX
Perrin Front Brake Kit Red for WRX
Perrin Rear Brake Kit Subaru WRX
Perrin Crank Pulley Subaru WRX
Perrin Fuel Rail Kit Black Subaru WRX
Perrin Oil Catch Can Red
Perrin Oil Catch Can Blue
Perrin Radiator Shroud Subaru WRX
Perrin Uppipe Subaru WRX
Perrin Downpipe Subaru WRX
Perrin Cat-Back Exhaust System Subaru WRX
Perrin WRX 02 Simulator
Perrin Shift Knob Subaru WRX
Perrin Short Shifter Adaptor Subaru WRX
Perrin Panel Air Filter Subaru WRX
Perrin Short Ram Intake Black Subaru WRX
Perrin Short Ram Intake Blue Subaru WRX
Perrin Short Ram Intake Red Subaru WRX
Perrin Turbo Inlet Hose Blue Subaru WRX
Perrin Turbo Inlet Hose Red Subaru WRX
Perrin Intercooler Hose Kit Black Subaru WRX
Perrin Intercooler Hose Kit Blue Subaru WRX
Perrin Intercooler Hose Kit Red Subaru WRX
Perrin Front Sway Bar WRX
Perrin Rear Sway Bar Subaru WRX
Perrin Rear Sway Bar for STi
Perrin Rear End Links Subaru WRX
Perrin Springs Subaru WRX

Sparco

Sparco Torino
Sparco Lap Belt Black
Sparco Shoulder Harness Black
Hardware for Sparco Lap Belt
Sparco WRX Seat Brakets
Sparco Sliders for WRX
Speedware Harness Bar WRX 02+

STi

STI JDM Projector Headlamps WRX
STi 520cc/min High Impedance Injectors
PnP Harness for STI JDM Projector Headlamp
STi Engine Mount Pair, RH-LH.
STi Radiator Cap WRX
STi Transmission Mount

Turbo XS

TurboXS Blow Off Valve Type H
TurboXS Blow Off Valve Type H-RFL
TurboXS Cat Back Adapter Subaru WRX
TurboXS Catpipe Subaru WRX
TurboXS WRX Downpipe Subaru WRX
TurboXS Midpipe Subaru WRX
TurboXS Race Pipe Subaru WRX
TurboXS RFL-Ti Muffler Subaru WRX
TurboXS Magnaflow Muffler Subaru WRX
TurboXS Standard Boost Controller
TurboXS Remote Map Selector Subaru WRX
TurboXS Top Mount Intercooler Kit Subaru WRX
TurboXS Uppipe Subaru WRX
TurboXS UTEC ECU Subaru WRX
TurboXS Front Mount Intercooler Kit Subaru WRX
TurboXS High Performance Boost Controller
TurboXS Short Ram Intake Subaru WRX

Misc.

Apexi Auto Timer
Perrin Filter Cleaner Kit
Auto Meter Cluster Bezel Subaru WRX
FATT DC 2 Black
FATT DC2 Silver
Blitz Dual T/T/DC II Silver
Cusco Rear OvalShaft "OS" Strut Bar
Walbro Fuel Pump Set Up Kit
Walbro 255lph Fuel Pump
Duralumin Light Weight Locking Lugs 20 pcs
VIS Racing CF Hood 02+ WRX with scoop
Tein Flex Kit w/ Upper Mounts WRX
Tein EDFC for use with Flex on 02+ WRX
H and R Coilovers Subaru WRX 02+
Helix Cast Mouth Downpipe
KB Exhaust Hangers Set of 4
Kartboy Hangman Exhaust Hangers
Limix Linea BE5 RSK Wheel Impreza GD 02+

Thats all for now folks, please let me know if you have any questions or if there is anything else that we can do for you. Again, see www.worldoneperformance.com for pricing and get a free T-Shirt with your order. Inquiries appreciated.

DEALER INQUIRIES WELCOME

Garret
World One
www.worldoneperformance.com
206.331.2004

All items listed are on World One Performance.com
Is it an Easter egg hunt? :lol:

I can't find the first 2 items I went looking for:

Perrin filter cleaner kit

Autometer cluster bezel for WRX

Any Do Luck floor support bars and floor cross bars for an 02 WRX?

Calvin

Sparco Lap Belt Black
Sparco Shoulder Harness Black

Whats the difference between the two?

I thought 3/4 point harnesses come with both. :confused:

Is it a tshirt or a tshift? If it's a tshift, what the hell is a tshift :lol:?


Brian

http://www.ravensblade-impreza.com/hosting/home.jpg (http://www.ravensblade.com) http://www.ravensblade-impreza.com/hosting/impreza.jpg (http://www.ravensblade-impreza.com) http://www.ravensblade-impreza.com/hosting/imprezamods.jpg (http://www.imprezamods.com) http://www.ravensblade-impreza.com/hosting/dmw.jpg (http://www.deniedmywarranty.org) http://www.ravensblade-impreza.com/hosting/bratthumb.jpg (http://brat.ravensblade-impreza.com)

Hi there...

It most definately is a T-Shirt, do you think you could edit the typo in the thread title for me?

03WRX...

A 4pt harness is comprised of a lap belp, and a shoulder harness. The lap belt is soley the portion that goes over your lap just like the a regular lap belt in a normal car. The shoulder harness are the two straps that pass through the seat and come down your shoulders to clip into the lap belt buckle. The buckle is a piece of the lap belt and without it you would have nothing to snap your shoulder harness into. The lap belt is secured to the seat belt mounts on the left and right of the seat, and the shoulder harness are secure to the harness bar on one end and the lap belt on the other.

I hope that this answers your question.

Cheers,

World One

You bet- done :).


Brian

http://www.ravensblade-impreza.com/hosting/home.jpg (http://www.ravensblade.com) http://www.ravensblade-impreza.com/hosting/impreza.jpg (http://www.ravensblade-impreza.com) http://www.ravensblade-impreza.com/hosting/imprezamods.jpg (http://www.imprezamods.com) http://www.ravensblade-impreza.com/hosting/dmw.jpg (http://www.deniedmywarranty.org) http://www.ravensblade-impreza.com/hosting/bratthumb.jpg (http://brat.ravensblade-impreza.com)

Thanks Brian..


Cheers,

Just thought I would throw this out there... How do you find any GC8 items on there... the store asks for vehicle and you have WRX/STI listed, but no GC chassis unless that gets lumped in with WRX.

There are no Do Luck products listed under WRX/STI.

Do I need a new map or what? Maybe I am just lost.

J

your webpage = br0ked... I'll be ordering a TXS dp from you as soon as I get paid... grumble check's in the mail grumble.

Originally posted by cnk
Any Do Luck floor support bars and floor cross bars for an 02 WRX?

Calvin

??:confused:

What the heck is the
Perrin WRX 02 Simulator
I put my Do-luck six point underbrace on and the speedware harness bar :banana: WHAT a HUGE difference my car now fells very well balanced. Plus the harness bar really helped with the body flex. Between the two they really stiffin up the front steering.
THANK YOU WORLDONE
Terrible Heeven Herbst:disco: :disco:

Originally posted by jeffg
Just thought I would throw this out there... How do you find any GC8 items on there... the store asks for vehicle and you have WRX/STI listed, but no GC chassis unless that gets lumped in with WRX.

There are no Do Luck products listed under WRX/STI.

Do I need a new map or what? Maybe I am just lost.

J
Don't worry, it's not you. I really was curious as to what that GC8 Rear Ladder Bar was, too, but there is no way to find parts on there. :confused:

Ditto,

You suck at the interweb. :p


Pics and prices on the Do-Luck bits please :D

Bump for a great Vendor :banana:

Well I will help out a little for all you GC8 guys, last month Garrett posted a listing of Do-Luck parts look here (http://forums.nasioc.com/forums/showthread.php?s=&threadid=442849&highlight=Doluck) with pics and prices.

Hope this helps,
Rick

i've always hated the WorldOne website. I'd much rather just see html instead of all that bling.

I can't even look at that site most of the time to buy parts because my workstation at work does not support flash.:(

Guys...

I apologize that the do luck bits aren't up on the website yet. I guess I jumped the gun my saying that you could find ALL of the parts on there. The majority of them are, I swear. ;) Since the Do Luck parts are so new, they just haven't been added yet. Once they are a regular fixture in our inventory you will see them up.

I will get some pictures and prices for the Do-Luck parts in this thread very shortly.

Thank You.

Hey I didn't get a t-shirt!!! J/k Garret. Thanks for the great deal on the fmic! Oh yea I didnt get any stickers.

Aaron

http://www.worldoneperformance.com/images/doluck/dlgc8.jpg

The three piece kit includes a complete front bumper, rear bumper lip and side skirts. Mounts like factory and come ready for paint!

Next is pair of Do Luck Suspension components, the rear ladders bars and rear differential support.

http://www.worldoneperformance.com/images/doluck/dflfsgc81.jpg

The Rear Ladders bars are 100% Stainless Steel and polished for an immaculate appearance, they come with instructions and hardware. The rear diff support is also 100% Stainless Steel and comes with aluminum bushings, hardware and instructions.

Next is Do Luck USAs orginal GC8 floor support bars. These bars dramatically strengthen the chassis of your GC8, and there is no part like it on the planet.

http://www.worldoneperformance.com/images/doluck/dlfsgc9.jpg

The Floor support bars come in aluminum, or coated steel and come with hardware and instructions.

Finally and in our opinion most impressive is the Do-Luck 100% aluminum one piece front strut tower brace. The weight on this brace is just above 3 lbs.

http://www.worldoneperformance.com/images/doluck/dlfstb.jpg

Prices are as follows:

GC8 Floor Support Bars Steel: 400.00 shipped

GC8 Rear Ladder Bars: 189.00 shipped

GC8 Rear Diff Support Bar: 189.00 shipped

GC8 100% Aluminum 1 piece F STB: 299.00 shipped

GC8 Three Piece Body Kit: 1950.00 shipped

Can a little turbo package be put together for me?? vf34, sti injectors, walbro fuel pump? I was going to check with another vendor, but I've heard good thing about worldone so I thought I would check with you guys first.:) Thank You

Hi there...

I can swing that package for 1259.00 You will have to let me know what you think about that. I would like to thank you for deciding to post in our thread and let you know that we will always do all that we can to take care of all of your needs!
I look forward to hearing from you again soon!

Cheers,


Garret
World One

exactly where does the GC8 rear ladder bar goes? any pics of it installed? Thanks

A= Rear Diff Brace
B= Ladder Bars

http://www.do-luck.com/img/bar/imp/gc8.gif

Six pt...

http://www.do-luck.com/img/bar/imp/gdb.gif

Originally posted by cnk
Any Do Luck floor support bars and floor cross bars for an 02 WRX?

Calvin

Can I get an answer to this??

Calvin

doh.. i ordered tons of parts the last few weeks from you guys.. i shouldve waited for your free shirt giveaway! :o :p :D

Calvin...

Sorry I missed your post...

The batch of six points and floor bars has sold out. There are more arriving in about 2 weeks time, just in time for the holidays. Let me know if you are interested. I appreciate your inquiry.

Cheers,

I'm interested in the floor bars and the floor cross bar for an 02 WRX. Do they bolt in to factory locations or do I need to drill holes? How much do they run? Thanks.

Calvin

No holes, they all mount using factory locations. You do have to remove some of the gromets in your under coating to mount the floor bars though, but its really not a big deal. Please let me know if you have any questions.

BTW, about 20% of what is coming in is verbally spoken for.

Thanks,

What's the pricing on the bars?

Calvin

Calvin the pricing on the floor bar is:

400 shipped for steel
520 shipped for aliminum

?:)

Originally posted by insanesuby
Any word on the TB?

Knock knock!:D

Hi there...

There is no real confident word on the TB yet except that I have them ordered. They will need to be inventoried so that I can come up with accurate costs for you guys, but I can tell you that I will do all that I can to make them good...

*UPDATE*

4 Do Luck USA Rear Cross Bars for the GC8

http://www.do-luck-usa.com/images/thumbs/assistbars_05.jpg

Get them while they are hot 349.00!!!

Any words on the price of the reverse scoop(painted)?

The rear cross bar mounts inside the car and goes over your trasmission hump and along the back of the rear passenger footwell. The floor support bars are installed outside the car under each side sill. They run laterally from the back of the front wheel well to the front of the rear wheel well. Rear cross bars mount using factory mounts and factory hardware. They bolt in where your seatbelts connect to your frame. Once the bar is slid into place you use the provdided wrench to open the rear cross bar (RXB) up from the center. You simply tighten the brace until it can't be tightened any more and is becomes stiff and ridgid.

This brace provides awesome support and has an effect that easily parrellels or surpasses that of a rear sway bar. If it helps you can think as the bottom component of a bolt in, roll cage. This is a great way to connect your B-pillars.

Cheers!

Kasio...

I have some of the reverse hood scoops in transit, however they will not be painted unfortunately. No word on pricing just yet. Please let me know if you have any other questions!

Cheers,

Originally posted by WorldOne
This brace provides awesome support and has an effect that easily parrellels or surpasses that of a rear sway bar.

Did you mean "rear strut tower bar"?

Can you get the complete GCB body kit and if yes for how much??

SuperMarkus..

Negative, I said what I meant and I meant what I said.. LOL!

Bambams247..

I assure you are refering to the kit on our STI, and the answer is no. Unfortunately the one on the STI is still the only one in the world. They are not being produced quite yet. I will keep you updated!

Cheers,

I can't quite grasp how this would outperform a rear sway bar in controlling body roll.

its not for the sti, it is for the bug-eyed version, and they have it on their website. let me know, thanks!

Are you refering to the GDA kit? If so see this thread...

http://forums.nasioc.com/forums/showthread.php?s=&threadid=458720

Folks there are one set of GC8 Ladder Bars Left and One Diff Brace Left. I have reduced the price on these last couple units to 179.00 shipped, and if someone wants to take all three GC8 braces I can do 650.00

Thanks!

Cheers,

2 GC8 Braces Left..

Cheers,

Price on Perrin End Links shipped to 07646?

ill ask the question again that Aj asked

what about a do-luck scoop? I found it for sale else where but would rather order from a NASIOC vender

http://rs-scooby.com/albums/Cars/scoop.sized.jpg

http://worldoneperformance.com/Sti/comp/Picture%20069.jpg

http://worldoneperformance.com/Sti/comp/Picture%20084.jpg

Project Mu USA was nice enough to set up the World One Performance STI with an awesome brake and rotor upgrade and now we are proud to bring this same upgrade to market for all of our customers.

NS Series Pads: Intermediate Sport Brake Pad Series:

NS Series Pads are the higher performance pad of the two offered in this post. They are intended for street and SEMI-Track yet since they are the more aggresive pad they will produce more dust and will squeek more than the B-force. Those who have stock STI brembos with stock pads should already be familiar with a good bit of squeeking however. The pads have OEM fitment and specificallyintended for use with the stock STI brembo Caliper.
And yes, the higher performance pads are the cheaper of the two offered. Pricing is as follows:

Fronts: 95.00
Rears: 85.00

B-Force Series: Non Asbestos Brake Pad Series

B-Force Series Pads are intened for all around use on the street. They are substantially more grippy then stock pads and are less dusty than the type NS. They will not bite as hard as NS's pads yet they will with certainly last longer. This is the pad that most daily drivers should be most intersted in, as they exhibit less squeeknig and dust than stock STi pads. For those who use their STI as a weekend auto cross, track warrior see the NS pad above. Pricing is as follows:

Fronts: 120.00
Rears: 112.00

Also Pictured SRC Competition Rotors. These Project Mu Rotors are slotted OE replacements. They have a two piece vented design and are only available in the colors shown.


http://worldoneperformance.com/Sti/comp/Picture%20086.jpg

When used in combination with NS pads like fitted on the World One STI you will experience substantial increase in braking force. The following components when used in combination with eachother are the

World One Stage I STI Brake Upgrade!!

For Pricing on SCR or SCP pro competition rotors as well as the World One STI Stage I brake upgrade please inquire within..

Thanks..

Garret
World One
www.worldoneperformance.com
info@worldoneperformance.com

the color is :(

free bump

Sorry Sound...

Project Mu Signature..

-G

^jynx^....

I appologize I must have initially missed the question. This scoop is definately a Do-Luck product and as such it certainly is available for order. I can tell you that I don't have one in stock, and that Do-Luck themselves do not have it in stock either. I have been working very closely with them on the ordering of subaru components and if there is an interest in this piece I will definately have them brought here for you. I will need to get a show of interest from board members and I will throw them in with out next batch of parts. We are bringing in a serious load of these components very shortly, so we are not looking at huge wait times if we act fast.

Thank you for your interest!

Cheers,

if the price for the reverse hoodscoop is reasonable I will take one

Also waiting on word on the piece I posted the picture of. Im confused as to what it is costs...

just give me a price and ill give you the money :banana:

Kaos200...

Are you refering to the rear ladder bars? If so they are in stock and I am offering the last set at 179.00 plus shipping. There is also a rear diff support in stock for the same price. The third set of bars pictured are rear member supports and they have yet to be imported yet. If you are interested only in the rear member supports let me know and I will investigate importation prospects for you.


Guys..

The reverse air scoop you are refering to has a price tag of 350.00. I know that its a lot so you will have to let me know what you think about this. Rest assured this is not a simply flastic piece like it used on the USDM model vehicles, it is top quality thick and strong FRP like is used on all Do-Luck Body Components!

Cheers,

World ONE

Originally posted by WorldOne

The reverse air scoop you are refering to has a price tag of 350.00. I know that its a lot so you will have to let me know what you think about this. Rest assured this is not a simply flastic piece like it used on the USDM model vehicles, it is top quality thick and strong FRP like is used on all Do-Luck Body Components!

Cheers,

World ONE


:( i wonder if the other one i found is a replica........ but they said it was realdeal Do-Luck

^jynx^...

I am not sure where you are shopping, but I am pretty clued in to Do-Luck parts availability here in the states. I sincerely doubt its the real deal unless it was brough over through unconventional means, if you know what I mean. Even if it was, it should have a hefty price tag associated with it as well.

Let me know!

Any chance they have the WRX rotors?

Leo..

You bet they do, but I don't have them in stock. No word on how long it would take to get them just yet. Send an email to info@worldoneperformance.com and I will set you up with some pricing!

Cheers,

the color is :)

project mu is good stuff

Thanks Neko!

Any pads for just the plain 4 pots?

Guys...

There are pads and rotors for the WRX as well. However I assume you are talking about the Subaru 4 pot. I do not have any listing for a pad that fits this caliper. What pad are you typically using with your 4 pots?

Cheers,

C'mon someone take these last braces off our hands!

Cheers,

i shot you a email.

Bumpity for great products as well as a great vendor :disco:.

Rick

To the top we go for you GC8 guys both the kits, and suspension products are awesome.

Rick

What is the thickness of the rotor

Garret, we use the same pad as the 300ZX Twin Turbo. VG30 ?

If it helps at all.

IIRC, it's the Z32 pad for the Subaru 4-pot's... 0460 rings a bell for the pad....

Hi guys....

I have sourced the pad and it is available, i will have to order some up though!

Photos with measurements of rotor thickness coming soon, sit tight!

Cheers,

You have mail jynx..

Thanks Rick!

Cheers,

115 shipped!

Cheers,

WorldOne,

Please review the vendor rules, especially #5:

http://www.nasioc.com/Default.cfm?Action=Rules

Originally posted by WorldOne
115 shipped!

Cheers,

And this is for?:confused:

Sorry...

The mods hashed my thread together rather haphazardly. One customer in one of the three threads that were merged asked about the price shipped for endlinks..

Thanks,

Christmas is only 10 days away, great last minute gifts for yourself! email us at info @worldoneperformance.com

Wow! The prices look like they've really gone up. I was interested in the GC8 aluminum floor support bars for $375, but they're $519.95 on your website now! Ouch. Even the steel ones are almost $400. Or are these still available to NASIOC members at the lower price?