.

So which is it, 3.3 or 330 ohm? If you used 330's that is likely your problem, AFAIK the correct value is 3 or 3.3 ohms.

When I pulled my factory '03 seats, I measured the resistance of the seat air bags and it was 2K. I put resistors in the connectors for both seats and not had a problem. FYI the factory Momo '03 steering wheel airbag was 2.2K because I checked that also.
This was only a test as I would never disable an airbag safety system on an automobile.:rolleyes: Yeah,right

.