10 in stock, ready to go your cost $1589.77 each
List is over 1800.00

shipping in USA approx $60 per block UPS ground
(weight 110lbs each and shipping varies by location)
item ships insured only!

Head Gaskets - $35.34 each

items are NOT on www.allsubaru.com
Please contact me to arrange purchase

We accept all credit cards, paypal, bank wire transfers.

Contact me with questions,
Jamie
www.allsubaru.com || allsubaru@subiegal.com

Can you get the 2.2T blocks as well? How much are they and if I did the swap would they pass emissions vs the 2.5 block? Thanks

-Mike

Originally posted by F22-Raptor
Can you get the 2.2T blocks as well? How much are they and if I did the swap would they pass emissions vs the 2.5 block? Thanks

-Mike

2.2T (Legacy) blocks = $1500.00 each

I have no idea regarding the emission concerns.
I would think if the swap is done correctly, there shouldnt be much of an issue.

hope this helps
Jamie

emailed ya.

got it thanks :)

ONLY 7 LEFT :eek:

Jamie

Originally posted by AllSubaru.com
ONLY 7 LEFT :eek:

Jamie

Im sure I could dig up ~$1250 each for them?

sorry. but we cannot do that.
cost on these is right near $1250

these are hard - very hard - to get
as Subaru keeps putting them on hold.

price is 1375.00 firm.

thank you
www.allsubaru.com

I sent an email, I would like to call to provide payment via credit card. Please email me back with a number, or just call teh phone number in teh email, its my work number and I will be here till approb 4:30 eastern time today. Thanks so much, I blew my motor this mornign and was afraid it would be a 3+ month wait till I drove a subaru again!

okay gang enough clowning in this thread please.

If you have to ask what a shortblock will do..
and what car you can / cannot put it in,
then you need to do EXTENSIVE research before
considering making a purchase.

Please, serious replies and inquiries only.

Thank you.

jdchmiel - I will look for your email.

regards,
Jamie
www.allsubaru.com || allsubaru@subiegal.com

Jamie,

How many you got? I'll take a couple. I'll call you tomorrow. I have lots of stuff for your racing effort down here.

Sean Sexton
RalliTek Performance Inc.
www.ralllitek.com

Originally posted by Rallitek.com
Jamie,

How many you got? I'll take a couple. I'll call you tomorrow. I have lots of stuff for your racing effort down here.

Sean Sexton
RalliTek Performance Inc.
www.ralllitek.com


Sean hey...
we have 5 left - call me this am
as i am out of the office this afernoon

800.426.1332
and yes, i have to get to PDX and pick up my stuffs!
many thanks,
Jamie

i'm not sure how this is relevant? :confused:

back on topic.

we have some in stock, for sale to the general public....

Please stay on topic. I moved the other posts to the Conversion forum:

http://forums.nasioc.com/forums/showthread.php?s=&threadid=525892

Paul G.

Jamie, I want one of these. I just gotta figure out where I'm going to store it until I figure out how I'm going to stuff it in the car... Logistics being figured out, expect a pm soon.

Originally posted by thesmokingman
Jamie, I want one of these. I just gotta figure out where I'm going to store it until I figure out how I'm going to stuff it in the car... Logistics being figured out, expect a pm soon.

sounds good.
i'll keep an eye out for your pm. :)

cheers
Jamie

Originally posted by AllSubaru.com
i'm not sure how this is relevant? :confused:

back on topic.

we have some in stock, for sale to the general public.... Originally posted by DarthChicken
If you are considering doing this and have the knowledge, buy one now! I checked, and there are TWO STi shortblocks available for all the dealerships in the US. They are on hold as well, for service departments that may need them. How Jamie got them is beyond me, and I don't really care (cause that means I got one )

I think she's down to 5 blocks at this point, they're going quick[/b]Originally posted by Jon [in CT]
What did you use to check dealer inventory? When I asked www.partsvoice.com about Subaru part number 10103AB440, it told me that:
Mike Shaw Subaru in Thorton, CO had 17 as of 03/17/04
Irvine Subaru in Lake Forest, CA had 10 as of 03/17/04
Carter Subaru in Seattle, WA had 8 as of 3/17/04
Metric Auto Sales in Huntington, NY had 5 as of 3/17/04
Arlington Auto Mall in Arlington, TX had 4 as of 3/17/04
Mastro Subaru in Tampa, FL had 4 as of 3/19/04
and there are other dealers with just 1 or 2 that I haven't mentioned.Dealers that expose their inventory wish to sell it. This is basic (I thought).

Jon.. i'd appreciate it if you would STAY OUT of our threads
UNLESS you are interested in making a purchase.

As it's obvious you're interested in doing nothing other than defying the moderators wishes and "making a point" (<--whatever that may be???) We would really appreciate it if you would refrain from posting in our sales threads.

many thanks. :rolleyes:

Jon,
Please stay out of this thread unless your interested in purchasing a short block from AllSubaru.com.

The inventory information isn't needed here.

Thanks,
Paul G.

Hey do you guys offer cam and lifter sets also. Ive checked the website, couldn't find anything. Gimme a quote on both sets of cams and lifters for a 98 2.5 rs DOHC


Thanks

Dino

Originally posted by dinom
Hey do you guys offer cam and lifter sets also. Ive checked the website, couldn't find anything. Gimme a quote on both sets of cams and lifters for a 98 2.5 rs DOHC

Thanks
Dino

i'll get you a quote ... :)

You got pm :)

Jan

still have a few blocks left if anyone's looking to upgrade :)

Still no word on the cams, lifters. The dealer get to cram my tailpipe tomorrow ( :huh: ) if I can't find a better price.

Rather give you my money than the snobbs in Colorado Springs:furious:

Interested in 2.5 short block. I have a stock 2.0L 02 right now. What is required for the upgrade in regards to heads, head gaskets, etc . . .

Thank You, Guru

There is at least one thread in the Conversion forum that addresses what you will need to do this swap.


http://forums.nasioc.com/forums/showthread.php?s=&threadid=535933

Originally posted by Hotrodguru
Interested in 2.5 short block. I have a stock 2.0L 02 right now. What is required for the upgrade in regards to heads, head gaskets, etc . . .

Thank You, Guru

Originally posted by pegdrgr
There is at least one thread in the Conversion forum that addresses what you will need to do this swap.


http://forums.nasioc.com/forums/showthread.php?s=&threadid=535933

VERY NICE! thanx. Now for the reading part.

Guru

Any left?

yes we still have these in stock
thank you for your interest

wish i could afford :(

Originally posted by afstevie68
wish i could afford :(

dont we all!! :lol:

Hey call me back, I emailed you guys. I want a 2.5 and have COLD HARD CASH!!! haha.

Guru

PM you phone number

do you have any usdm sti longblock

Guess these guys don't respond to their own thread replies??? :( I've emailed and called them and still no response.

Guru

Originally posted by raazin
do you have any usdm sti longblock

longblocks are not availiable
sorry!

Originally posted by Hotrodguru
Guess these guys don't respond to their own thread replies??? :( I've emailed and called them and still no response.

Guru

what number did you ring?
you most certainly did not speak to me...

any left?

Well it was the number on the website. Still interested, here's my contact information below.

Jay Marroquin
832.640.8232
jay@hikarting.com

Originally posted by Hotrodguru
Guess these guys don't respond to their own thread replies??? :( I've emailed and called them and still no response.

Guru

I'm still waiting a reply to pm's, emails as well. I tried calling, but never got an answer...

Originally posted by shoooter_j
I'm still waiting a reply to pm's, emails as well. I tried calling, but never got an answer...

I have been away for several days racing.
back now... starting on emails first
and have about 100

so please try to be patient :)

jamie

Originally posted by raucky
any left?


5 left

Bringing this thread back from the dead...

Jamie - I need to talk to you about one. I need it for the Fridge. :)

Please PM me.

-mykr.

you got it.

shipped out on Monday :)

enjoy!!! :devil: :banana:

Too bad UPS hates me and is going to deliver it on the 21st.

Not enough time to get her back running and then break her in for the Detroit region SCCA vs NW Ohio region SCCA autoX on that Sunday. :(

Thanks again Jamie. As always, the best and fastest service from allsubaru. :D

You know I'll be calling for more bits later. :lol: :huh:

-mykr.

any left jamie?

eli

yep but the price increased....

1589.77 per block .... price just JUST went up.

Jamie

Head gaskets sold each, meaning I'd need to buy 2 to outfit a 2.5L block correct?

Head gaskets sold each, meaning I'd need to buy 2 to outfit a 2.5L block correct?

correct - price is each.

thank you for your interest, jamie
www.allsubaru.com

Any left? Price?

why the price went up?

are these NEW, COMPLETE, OE short blocks?

Jamie, can you fit a set of crawford pistons in one of these then ship it out to me?
If so, how much extra (obviously the cost of the pistons+labor, but round about how much?)

Is 2.2t price you posted for a block or a shortblock.

Thanks
Matt

Is the price $1,300 or $1,500 for the USDM 2.5 shortblocks?
how much would be shipping to San Juan Puerto Rico 00914?

isnt this thread real old?