Got tons of stuff ready to go guys!

Cusco - everything is in stock and on sale, and moving quickly!

Cusco Strut Braces for WRX and STi Click Here (http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=113)

http://www.z1auto.com/images/cuscoFrontBraces.jpg

Cusco Sway Bars for WRX and STi Click Here (http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=116)

http://www.z1auto.com/images/gdbrearswayin1.jpg

Cusco Lower Chassis Bars for WRX and STi Click Here (http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=574)

http://www.z1auto.com/images/gdbundercarcuscoarmbarv2.jpg

Also in stock are Tein SS Coilovers for the 2002-2004 WRX and STi (sedan and wagon). These are terrific units for street and autocross, and feature 16 way dampening adjustment, pillowball mounts front and rear (we also offer them without pillowball mounts for those interested), and are compatible with EDFC in car dampening controller (only can be used on pillowball version).

Priced at $1360.00 shipped in the 48 states.

Orders can be placed online here:

http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=108

or by calling us, PM'ing, emailing or sending us an IM

Adam
Z-1 Performance
631-863-3820
z1sales@z1auto.com
www.z1auto.com
AIM: z1auto

What sort of weight saving are you looking at when going to the type I or type II chassis bars versus stock? Thanks.

Adam

There are no factory underbraces........

bump!

Got a question on the type 40 cusco strut bar... how does this differ from the normal strut bar?

Do you have the first one that is angled for the front strut bar and the straight one with the v-brace for the rear... or would I have to order the combo and add the v-brace onto the total?

Thanks :-)
-Nigel

EDIT better yet is this the front strut bar that is packaged in your package deal?

Originally posted by Z1 Performance
There are no factory underbraces........


From your web site:

The Type I lower arm bar is made of tubular aluminum to help reduce weight over the stock bracing without compromising strength. Coated in the classic Cusco blue paint, it offers years of protection against the elements while adding to the overall look of the bar. The Type I bar is a 2-point setup and includes all the required hardware for installation. It bolts on easily using normal hand tools.





.....which is the reason why I didn't order one from your site the other day, because I am not too concerned about weight saving at this point in time. Couldn't recall seeing a brace like that on my car, but it's been a while...:confused:

I cannot even recall ever selling a Type 1 for a WRX...everyone does the Type II.

New Shocker - the Type 40 is a round polished aluminum bar that is 40mm thick. The OS is a flat oval shaft bar. The one you pictured is the OS

The rear V brace (aka the OS-T) is an optional rear bar that triangulates the rear strut bar to the trunk floor. In order to fit the OS-T, you have to have Cusco's OS rear, Type 40 rear or Type Carbon rear strut brace as well.

Adam

Don't want to ask stupid questions but will this work on an 03' wrx... as far as the cusco strut bars... I click on the link above and it states this on your site.
"Cusco Strut Braces for Impreza (1993-2001 model)"

Just wondering if it will work?

Thanks,
-Nigel

Nigel - the first link in the post takes you directly to the section of the site for strut braces for 2002-2004 WRX and STi.

Here is the link again:

http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=113

I'm thinking about that type2 brace Adam

Got new tires on the wagon and shes crying for more long stiff hard stuff.

Originally posted by mlambert
shes crying for more long stiff hard stuff.


and what? you're not satisfying that requirement?
:D

:lol:

whens the next bbq?

adam, you have any cusco titanium bars in stock?

yes we have them for GC8 and WRX in CA

price?

http://www.z1auto.com/prodmore.asp?...&prodid=113

i'm thinking of ordering the cusco rear sway bar for my 04 WRX. but what's the shipping to 32608? it doesn't say on your site. any discounts for nasioc members?

the price on our site includes shipping in the 48 states!

TTT - just got some more stuff in guys, so wanted to give you a rundown.

Tein - SS coilovers for WRX/STi (noin pillowball version) - $1225.0 shipped

- SS Coilovers for WRX/STi with pillowballs front and rear) - $1360.00 shipped

- SS with pillowballs and EDFC - $1720 shipped

- Flex coilovers for WRX/STi - $1549 shipped

- Flex with EDFC - $1900.00 shipped

All Tein coilovers specs can be viewed on our site here:

http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=108

Cusco - got Cusco galore ready to move!

OS Front strut braces for WRX/STi - $149 shipped
OS Rear strut braces for WRX/STi - $149 shipped
OS Front and rear strut brace combo - $275 shipped
Type 40 rear strut brace - WRX/STi - $175 shipped
Type Carbon rear strut brace WRX/STi - $210 shipped
Front 22mm sway bars for WRX/STi - $155 shipped
Rear 22-24mm sway bars for STi only - $155 shipped
Front and rear sway bar combo STi only - $289 shipped
Comp S Coilovers for WRX/STi - $1399 shipped
Front pillowball mounts - front only WRX/STi - $240 shipped
Lower Arm Bar Type 1 WRX/STi - $79 shipped

For GC8:
Type 40 front strut brace - $175 shipped
Type OS front strut brace - $149 shipped
Type OS rear strut brace - $149 shipped
Type OS Front and Rear strut brace combo - $275 shipped
Titanium front strut brace - $289 shipped
Type Carbon rear strut brace - $210 shipped
Zero 2's with pillowball mounts - $2050.00 shipped

Orders can be placed right on our site, or by calling us at 631-863-3820

We accept all credit cards as well as Paypal (address for Paypal is z1sales@z1auto.com)

Any questions, just ask!

Adam

bump - all items ready to go guys! Orders can be placed on our site, or by giving us a call at 631-863-3820

Adam
Z-1 Performance
www.z1auto.com

Tein S Tech's are back in very limited quantities after a long backorder for you 2004 guys! We shipped TONS of them this week, and have just 3 sets left now till the next shipment arrives!

Lowers your WRX sedan 2.4 inches up front, 1.3 inches rear. Lowers the 2004 STi 1.6 inches up front and .9 out back. Features spring rates of 240 lbs front, 207 lbs rear.

pictured here on a customer's 2004 STi :)

http://www.z1auto.com/images/stitein.jpg

Priced at $229.00 shipped in the 48 states.

Orders can be placed on our site by clicking here (http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=589)

bump

.

ttt - Tein coilovers back in stock, and still loads of Cusco!

Guys just got in a large shipment of STi Group N strut tops for the 2002-2003 cars, as well as a bunch of STi Group N engine and tranny mounts!

STi Group N Motor mounts (pair) - $151 shipped. Click this link to order:

http://z1auto.com/prodmore.asp?model=wrx&cat=driveline&prodid=372

STi Group N tranny mount - $79.00 shipped. Click this link to order:

http://z1auto.com/prodmore.asp?model=wrx&cat=driveline&prodid=364

2002-2003 front and rear STi group N strut tops - $381.00 shipped. Click here to order:

http://z1auto.com/prodmore.asp?model=wrx&cat=driveline&prodid=364

STi Group N engine and tranny mount combos: $210.00 shipped

STi Group N package setup - includes front and rear strut tops, engine mounts and tranny mount. Fits all 2002-2003 WRX/RS's: $560.00 shipped (PM us to place order for either combo)

Adam
Z-1 Performance
631-863-3820
z1sales@z1auto.com

When installing the Cusco lower arm bars, you don't have to remove your subframe connector or anything do you?

http://z1auto.com/images/gdbundercarcuscoarmbarv2.jpg

pic of the Type 2 installed

Originally posted by drees
When installing the Cusco lower arm bars, you don't have to remove your subframe connector or anything do you?

nope - just unbolt 4 bolts - place the bar on and reinstall with the same bolts. 5 min tops - if you have a lift. :D

you got PM :)

Do the chasis braces for a WRX work for a RS (04 to 04)? Do you happen to know when KYB AGX will be released for the 04? Love the prices, I wish I had more money to do a lot of things. :)

sorry they only fit a WRX/STi, not an RS

no ETA on AGX's for the 04 sorry

bump!

more S Stechs in stock for WRX and STi (2004!)

ttt

Does the V 2 Lower Arm Bar install in the front only? I've seen a few places that say they install in the front and rear.

v2 is only offered for front

bump for updates!

GT Spec sway bar endlinks and antilift kits back in stock!

see GT Spec parts here (http://z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=663)

Cusco 6 point cages for WRX/STi back in stock! These are chromoly units, using 40mm diameter tubes, 100% bolt on cages.

http://z1auto.com/images/cusco7ptcageSTi.jpg

http://z1auto.com/images/Cuscocage3sti.jpg

Priced at $799.00 + shipping (please contact us for shipping quote)

All Cusco sway bars, strut braces, in stock.

We also recently began offering the full line of Hotchkis suspension components - call, PM or email us for your specific needs!

Orders can be placed right on our site at www.z1auto.com, or by calling or stopping by

Adam
Z-1 Performance
www.z1auto.com
631-863-3820
z1sales@z1auto.com

Does that roll bar block the glove box?

nope

Originally posted by Z1 Performance
http://z1auto.com/images/gdbundercarcuscoarmbarv2.jpg

pic of the Type 2 installed

Does this fit on an 05 STi? (the subframe seems a little different than what was on my WRX)

Thanks,
Masuo

I will have to ask Cusco, but I am 99% sure the front end of the 2005 and 2004 models, though there are rear differences.

Got TONS of Cusco sway bars, strut braces, lower arm bars, shifter bushings, coilovers, lateral links and trailing arms ready to go - just let us know what you need!!

Also have Tein Basic and Super Street coilovers for all 2002-2004 WRX sedans, wagons and STi's in stock.

The Type Basic is for those that simple want a height adjustable suspension kit without the bells and whistles. Think of it as a really well matched set of springs and shocks, with the added bonus of height adjustment! Priced at $895 shipped.

The Type Super Street steps it up with 16 way dampening adjustment, and includes pillowball mounts. Also compatible with the EDFC, which allows you to adjust the dampening from inside the car, plus store your favorite settings! Priced at $1360.00 shipped with pillowball mounts, or $1719.00 shipped with the EDFC.

Order Tein Coilovers on our site by clicking here: (http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=108)



Adam
Z1 Performance
631-863-3820
z1sales@z1auto.com
z1auto.com

Originally posted by Z1 Performance
I will have to ask Cusco, but I am 99% sure the front end of the 2005 and 2004 models, though there are rear differences.


Thanks! There are diferences in subframes between the 02 WRX and the 05 STi at least... Hopefully the mounting points for the brace stayed the same.

2superblus - emailed Japan so hopefully will know by Monday

Just read that someone got the prodrive springs for 04 STi already. Ne word on price and availability??

Any pics of the Cusco GC8 titanium strut bar?

Prodrive springs for the 2004 are not available yet....I spoke with them for about 20 minutes Friday, but we will not offer them for sale till theya re physcially ready to ship.

dead-eye - It looks the same as the WRX one, just has different end plate. We don't ahve them in right now but I'll see if any are coming.

Adam, you have a PM.

Brian

Brian - please resend it or email me to z1sales@z1auto.com

Done.

If you don't get it this time, I'll e-mail you tomorrow (I'm 8 hours ahead of EST.)

pm'd you back olsalty

Tein S Techs now sold out at the above price

Eibach's are tentatively spoken for.

Bump!

Prodrive springs for the 04 STi are now in stock, ready to go along with heaps and heaps of Cusco bits, Tein coilovers :)

You can order the Prodrive springs by clicking here:

http://www.z1auto.com/prodmore.asp?model=wrx&cat=handling&prodid=888

Adam

ttt - one set of Prodrive STi springs in stock

Also have one set of Sti pink in stock for the 2004/2005 models

Cusco.....what can we say..by the boatload :)

bump it up!

TTT! Tein, Cusco, Prodrive springs for STi, Eibach springs for all year models, and one set of STi pinks for the 04 (plus Group N mounts) all in stock!

Adam

Hi Adam,

any speical on Prodrive Springs for 02 wrx?

sure thing - shoot us a PM and I'll get it taken care of!

Also for you GC8 guys, we have a huge special on Tanabe GF210 springs right now. These lower your car 1.3 inches up front and 1.0 inch out back. Spring rates are 3.5 kg/mm in front and 2.9 kg/mm in the rear. We usually sell these for $239.00 + shipping, but while current supplies last, we have these on special for $150.00 shipped in the 48 states!!!!!

Orders can be placed on our site by clicking the following link:http://z1auto.com/prodmore.asp?model=legacy&cat=handling&prodid=1167

Payment can be right right off this link via Paypal or Credit Card.

Adam
Z1 Performance
www.z1auto.com
631-863-3820
z1sales@z1auto.com

04 pinks are sold, as well as Gr N mounts for now......still have GC8 mounts in stock though

z1 do tien sti stech's fit the 05 sti? are they in stock?

yes and yes :)

okay thanks

Other than the shape (and I would guess strength), what are the differences between the Cusco OS and AS braces?

Thanks...

Sorry if I'm asking a dumb question....but the Type 2 brace....what do you actuall Remove from the car before installing that? I don't have the luxury of crawling under my car to compare it to the pic tonight...sorry :confused:

bump

Sorry if I'm asking a dumb question....but the Type 2 brace....what do you actuall Remove from the car before installing that? I don't have the luxury of crawling under my car to compare it to the pic tonight...sorry :confused:

You don't have to remove anything. It just bolts up.

hey adam, i have a 98 L and I want a swaybar for the front and rear. I like the adjustable(19-21mm) sway bar for the back, do you have the same thing for the front? If so how much shipped to 93727 (fresno Ca) thanks, Jared. also what would be some good endlinks to match with these new bars front and rear?

^ im talkin about the cusco ones

bump!!!!