:)

Will this kit work on 03 wrx?

Everything except for the Brake pads.

How do I make payment? I want the Progress rear sway bar w/ mounts.

Originally posted by NinosAutoAccesories

Progress rear sway bar for 93-04 Impreza AND STi

Includes extra heavy duty sway bar mounts, bushings and all nessesary hardware for installation.[/color]

174.99 shipped
http://www.ninosautoaccessories.com/wrxrsway.JPG

Nino
732-557-0491[/color]

I have a 93 FWD without a rear bar. What size does the bar come in, 18mm? I know I also need endlinks and new lateral links. Is there anything else would I need to get this on the car? And the major question is how good a deal can you make me for the kit and the additional parts:);). Slightly used may be ok if you have them too (esp. for the lateral links- Maybe off project car #1)
Thanks

the progress is a 22mm adjustable bar (20-24 IIRC). That should be all that you need.

2fast4uWRX : paypal me at ninosautoacc@aol.com

pittkid333: this is 20-22-24mm...I dont have the other parts though. :(

Bump for one hell of a vendor!

:)

"Progress springs for 93-03 Impreza As well as 04 Impreza and STi springs are all in stock.
1.8" front drop and 1.5" rear drop with 210lb front klinear rate spring and 150lb rear progressive rate springs.
179.99 shipped FREE REAR CAMBER BOLTS!!"
-Do these work on my stock wagon, just take out my springs and slip these in?

"Akebono Ceramic pads for all 4 corners 98-02 2.5rs and WRX 105.00 shipped"
-I have DBA rotors, blanks. Will these work on them?
thanks,
aidan

aidrock : I do have wagon springs available...and the pads will work

check your PM's Nino :)

I need a set of engine/tranny mounts.

or

Cusco lower arm bar Ver 1 and front sway bar.

same deal as before?:D

Hi!! Do you have ground controls for a 03 WRX??? PM me!!Thanks!!! :)

Scratch the Ver. 1 bar. not compatible with my Ver. 2 as I thought.

So just the front sway bar please!

wrx_honey : Yes

Leonardo : OK, its all yours. :) What about the mounts?

check your email..
--bobby

:D

Wondered if you had sti stuts and lowering spring for a gc8 in stock? Looking for options of suspension, want to stay away from coilovers, and heard that was a good package. Pm if you have any idea/deals.
-Ben

Looking for a set of swaybars for my RS. I want a adjustable rear, and also a front. Do you have a combo? thanks

Sean

Will the progress front and rear sway bars work for a WRX wagon? Are there any fitmant issues?

will the front sway bar work on an 02 2.5rs? how much if so?

On the Stoptech Stage 2 brake package, can you swap out those pads for something elsE? like carbotech. and how much bigger are the rotors than stock? or are they simply slotted.

thanks,
christian

I've read conflicting information on the Progress Springs. Are they designed to work with the stock struts or will they kill the stockers in a few months?

Thanks!

Mike

ScoobyRSRallier : Not in stock, special order

structureboy : I've got some cusco stuff heading my way right now.Shuld be here by friday. :)

ttenneb : Progress says no, but I've done a few installs with no problems so they seem wto work.The only issue is if you try to use aftermarket links on the front.

darioc : No, you need a RS specific sway bar

thetikler1 : Unfortunatly I dont sell carbotechs, I will however discount the kit by 75 bucks if you dont want pads.The rotors are slotted and the same size as stock

hockeyguy : No springs, no matter what someone says will allow your struts to last as long as they would with stock ones.Its just not possible. They may work well for a while, but the life will always be reduced.

Originally posted by NinosAutoAccesories


ttenneb : Progress says no, but I've done a few installs with no problems so they seem wto work.The only issue is if you try to use aftermarket links on the front.

I have the helix endlinks in the front. Do you happen to know if this would work or not with the progress swaybar.

Also, does progress plan on making a front swaybar for the wagon. Thanks

If it reuses the stock hardware it may work, I cant be sure without seeing them installed in person though

All vendors were informed of the vendor rules before they were allowed to be registered vendors on NASIOC. Incase you forgot what they are please follow the link below. Any further violations of Rule #5 (wether it be an accident or blatant disregard) will be punished with warning points.
All vendors have the power to close their sale threads in the vendor forums. You are instructed to close your previous sale thread before starting a new one. NO EXCEPTIONS!!!

Rules link:
http://www.nasioc.com/Default.cfm?Action=Rules

The post was cleared before the new one went up...I clicked open/close...relax.