$1 Shipping on All Sway Bars and Springs Below!
Shipping special expires April 12, 2004.





Cusco 19-21MM Rear Sway Bar $165
3-Way adjustable, includes bushings
Ideal for 93-01 L/RS

Cusco 22-24MM Rear Sway Bar $165
3-Way adjustable, includes bushings
Ideal for 02-04 WRX

http://www.napsusa.com/images/items/TYPE-OS.jpg
Cusco Type OS Front Strut Tower Bar $165
Available for 93-01 L/RS, 02-03 WRX

Cusco Type OS Rear Strut Tower Bar $165
Available for 93-01 L/RS, 02-03 WRX

http://www.napsusa.com/images/items/LowerBarI.jpg http://www.napsusa.com/images/items/LowerBarII.jpg
Cusco Lower Arm Bar I $85
Cusco Lower Arm Bar 2 $167
Both lower arm bars are made of tubular aluminum to help reduce weight over the stock bracing without compromising strength. Coated in the classic Cusco blue paint, it offers years of protection against the elements while adding to the overall look of the bar. The type 1 bar is a 2-point setup; the type 2 is a multi-point setup and both include all the required hardware for installation.
Bolts on easily using normal hand tools.





http://www.perrinperformance.com/products/swaybars/installed.jpg
Perrin 22MM Adjustable Rear Swaybar $205
Includes upgraded swaybar mounts, u-brackets and bushings.
For 93-97 Impreza, 98-01 Impreza RS, 02-04 WRX






http://www.kymphan.net/aerosim/Progress/Progress_Springs_Swaybar_And_Mounting_Brackets.jpe g
Progress Springs
For 02-03 WRX $175
For 04 WRX $175

Progress Front Sway Bar - 22MM Adjustable* $140
For 02-03 WRX

Progress Rear Sway Bar - 22MM Adjustable* $175
For 93-01 Impreza L and RS, 02-04 WRX

Progress Rear Sway Bar - 22MM Adjustable* $175
For 04 STi

*Note: The Progress sway bars are now gunmetal.. their springs are still the same color.





http://www.prodrive-usa.com/productImages/43.jpg
Prodrive GDA Springs (02-03 WRX) $299
These high-performance spring sets are specifically designed to work with the factory struts. These springs lower the vehicle approximately 20mm and increase the spring rate by 25%. This complete kit features Eibach springs manufactured to Prodrive’s specifications. Spring color is blue.

http://www.prodrive-usa.com/productImages/45.jpg
Prodrive GC8 Springs (93-01 L/RS) $245
Prodrive’s high-performance spring sets are designed to work with either standard Impreza dampers or with JDM STi RA Dampers. These springs lower the vehicle approximately 25mm and increase the spring rate by approximately 25%. Springs are manufactured by Eibach to Prodrive's specification. Spring color is red.





http://tein.com/img/ba-ek.jpg
Tein Basic Coilovers $925
The Tein Basics are height adjustable only with a preset dampening. Kit does not include top mounts.
Application: 02-04 WRX sedan and wagon, and 04 STi

Tein Type-S Springs $185
Only one left in stock
Application: 02-03 Sedan

Tein Type-S Wagon Springs $185
Only one left in stock
Application: 02-03 Wagon




We're available for installations 7 days a week, including weekday evenings. :)

Kym
kym.phan@aerosim-research.com

Aerosim Research Ltd.
1374 Logan Ave., Unit E
Costa Mesa, CA 92626
(714) 545-5679 tel./fax

Do you have any camber bolts for sale?

Originally posted by wrx102
Do you have any camber bolts for sale?

I've got the Intrax camber bolts for $37 :)

Kym
kym.phan@aerosim-research.com

I asked you this same question in a different thread but i can't remeber or find where it was, so please bare with me. Any idea when the 04 prodrive springs for the wrx will be out and what they will cost?
thanks for you patience
-nick

kym, I need heavy duty endlinks too!

Originally posted by guzzettaman
I asked you this same question in a different thread but i can't remeber or find where it was, so please bare with me. Any idea when the 04 prodrive springs for the wrx will be out and what they will cost?
thanks for you patience
-nick

Hey Nick,

No exact date from Prodrive yet. They'll be around $299 or $300 for the 04 WRX springs and a bit more for the STi springs (because they include bumpstops).

Again, I apologize for the Prodrive 04 spring wait.. I am pestering Prodrive just about everyday about giving me an ETA and concrete pricing though :)

Originally posted by ttboy19
kym, I need heavy duty endlinks too!

We carry Kartboy's polyurethane bushing endlinks and Perrin's spherical bearing endlinks; $100 and $140 respectively. :)

Kym
kym.phan@aerosim-research.com

Damn, the 2 week wait for the springs has turned into almost a month already and still no news. Starting to get impatient

On a side note if lets say I pre-order a set of prodrive springs for the STi next monday, will they be included in the $1 shipping promotion??

Originally posted by wewu
On a side note if lets say the prodrive springs for the STi come out next week, will it be included in the $1 shipping deal??

No, for first month of sales, the $1 shipping will not apply to the Prodrive 04/STi springs. :(

Kym
kym.phan@aerosim-research.com

would you ever do anything like this again I have NO cash and I am accually in debt 2700 dollars..... hahah so once thats paid off I'd want a bunch of thos cusco parts :eek:

Originally posted by scobaru
would you ever do anything like this again I have NO cash and I am accually in debt 2700 dollars.....

:eek: :(

Originally posted by scobaru so once thats paid off I'd want a bunch of thos cusco parts :eek:

Keep your eyes posted! Or just give me a call :p I can usually work something out :)

Kym
kym.phan@aerosim-research.com

what is the adjustment range of the intrax camber bolts you sell? Is the 37 shipped?

Originally posted by MustGoFast
what is the adjustment range of the intrax camber bolts you sell? Is the 37 shipped?

According to Intrax's site they allow -2¹ to +3.25¹ of adjustment, but it does depend on application. Shipping is usually extra, but shoot kym an e-mail or give her a call to see what we can do for ya!

Thanks,

-Milan
milan.rao@aerosim-research.com

Originally posted by MustGoFast
what is the adjustment range of the intrax camber bolts you sell? Is the 37 shipped?

For Subarus, it's 1.75º positive/negative. The $1 shipping also applies to the camber bolts :)

Kym
kym.phan@aerosim-research.com

do you have the steering rack bushings for a 04STi? And the front strut tower bar that fits around the intercooler?

also i keep hearing the cusco 22mm rear bar is the way to go ...as opposed to the progress bar.

mike

Originally posted by AllWheelsDriven
do you have the steering rack bushings for a 04STi? And the front strut tower bar that fits around the intercooler?

also i keep hearing the cusco 22mm rear bar is the way to go ...as opposed to the progress bar.

mike

We don't carry any steering rack bushings, but the Cusco front strut tower bar should clear your stock STi intercooler. I'll give Nukabe a call tomorrow and double check for you :)

As far as the Cusco sway bar vs. Progress sway bar, I like them both. Progress is a bit less pricey, given it includes upgraded mounts, u-brackets, bushings and hardware. The Cusco bar only includes bushings and u-brackets. :)

Kym
kym.phan@aerosim-research.com

Kym,

I'm trying to call you back about the intrax camber bolts but for some reason the number I used before seems to be going somewhere else now? ***? I am using redial to the number I got you on before and compared it to what I see on line but no luck.. any idea what gives?

I sent you a PM w/ my Num if you can call me so I can order.

Chuck

Really wanna get that in on Fri.

wow.. great customer service.. Kym called me this evening to square everything away to ensure I'd get my stuff when I needed it..

Thank you.

Glad I got a hold of you before it got too late. :)

Weird about the number change-y thing though..

Anyway, I'll do my best to get you those bolts by Friday :)

Kym
714.545.5679 tel./fax
kym.phan@aerosim-research.com

Hi Kym,

Do you still carry Cobb Tuning Rear Sway bars for the 03 WRX?

Kym,

Thanks again.. got my bolts today.. they even made it a day early.. now UPS better not be late w/ the rest of my suspension.

oops.. see below post. :(

Originally posted by sonxwrx
Hi Kym,

Do you still carry Cobb Tuning Rear Sway bars for the 03 WRX?

We sure do. They should be in stock in 2-3 weeks.. Cobb's been really backed up with their orders lately (I'm assuming a lot of it has to do with the success of the Access Port). :)

Originally posted by MustGoFast
Kym,

Thanks again.. got my bolts today.. they even made it a day early.. now UPS better not be late w/ the rest of my suspension.

No prob! Have fun, and feel free to give me a call if you have any questions during the install :)

Kym
kym.phan@aerosim-research.com

which front sway bars will fit the 2002 2.5rs?

hey what time are you guys open tomorrow? I'm thinking of stopping by since I have to pay visit to SCS so they can fix my scooby.

Originally posted by darioc
which front sway bars will fit the 2002 2.5rs?

I've got a Cusco 21mm and 22mm front sway bar for your RS. :) $170 + $1 shipping.

Originally posted by Jonny427
hey what time are you guys open tomorrow? I'm thinking of stopping by since I have to pay visit to SCS so they can fix my scooby.

I'll be in today around 12:30-1PM :) Just gimme a call, we're right across the street :)

Kym
714.545.5679 tel./fax
kym.phan@aerosim-research.com

Kym,
Pmed you about some prodrive springs...

Tom

Whoops double post

Originally posted by ClimbinNBouldern
Kym,
Pmed you about some prodrive springs...

Tom

Gotcha.. tried giving you a call, but got your voicemail so I just left a message. I'll send your springs out once I confirm your shipping address (school or home?) :)

Kym
kym.phan@aerosim-research.com

Kym,
Do you carry prodive floormats and shift knobs? If so I'll take them and some p1 springs.
Let me know.

Sti27

Kym,

sent you a million emails,, haven't gotten any replies... :confused:

can you let me know about my fluid I ordered?


Ryan in Canada

Originally posted by sti27
Kym,
Do you carry prodive floormats and shift knobs? If so I'll take them and some p1 springs.
Let me know.

Sti27

Yup! I believe the floormats will be another couple weeks to come in, but the 6-speed knobs should be in stock in every color (I'll have to double check though). :)

Originally posted by SPIDEYWrX
Kym,

sent you a million emails,, haven't gotten any replies... :confused:

can you let me know about my fluid I ordered?

Ryan in Canada

The fluid! USPS wasn't happy with crossing international lines with uh, "dangerous" liquids. I'm still waiting to hear something back from them. I might have to issue you a refund and tell you that we can't get that fluid out to you. :(

Kym
kym.phan@aerosim-research.com

Kym,
I'm not looking for a 6speed, I need the 5speed knob with the blue top (dont know if there is a difference). Do you have them? So a couple of weeks on the floormats? Can you give me a total price on all shipped?
Thanks

Sti27

Originally posted by Aerosim Research Ltd




The fluid! USPS wasn't happy with crossing international lines with uh, "dangerous" liquids. I'm still waiting to hear something back from them. I might have to issue you a refund and tell you that we can't get that fluid out to you. :(

Kym
kym.phan@aerosim-research.com


ahhh.. why they gotta be like that :lol:

any idea when you might find out, and if so.. when I might recieve the refund?

Originally posted by SPIDEYWrX
ahhh.. why they gotta be like that :lol:

any idea when you might find out, and if so.. when I might recieve the refund?

Sorry about that. :( I guess I learned I can't be shipping "dangerous" fluids. :p

Anyway, I just refunded your money now. :)

Kym
kym.phan@aerosim-research.com

Originally posted by sti27
Kym,
I'm not looking for a 6speed, I need the 5speed knob with the blue top (dont know if there is a difference). Do you have them? So a couple of weeks on the floormats? Can you give me a total price on all shipped?
Thanks

Sti27

Oops, sorry about that. It'll be the first into the second week of May for the floormats, probably. Anyway, I'll send you a PM with the total. :)

Kym
kym.phan@aerosim-research.com

P.S. Sale is long over, I'm closing this thread. :)