The gauge tends to bounce around a lot. While all the other gauges are pretty stable. I used the aux. plug under the intercooler and it was a pain to get in. Anyone have any info?

i thought oil press sensor should be placed at factory oil pressure
sonsor position not under intercooler.

i think Temp sensor goes under intercooler location

mine bounces around a fair amount too - i dont know if i used the optimum location to get the oil pressure sender into the oil .. i used the defi sandwich adapter for the two oil senders. whats your high/low/average readings? i think mine are usually around 2 at idle and bounce up to about 7 on throttle ..

it should go on the factory sensor. mine also bounces around abit when cold then once warm dosent increase much.

Remba its pressure so when u put ur foot down the pressure is osbviosuly gonna increase and visa versa

Originally posted by drtaka
i thought oil press sensor should be placed at factory oil pressure It shouldn't matter. Mine is tapped under the intercooler and my readings are consistent with what they should be.